首先我们需要安装homebrew,在终端输入下面命令安装:
ruby -e "$(curl -fsSL https://raw.github.com/Homebrew/homebrew/go/install)"
安装完成后,运行下面代码安装vim和mac vim:
brew install vim
brew install macvim
brew install ctags
brew install cscope
设置Mac上的ctage和默认的vim
现在已经安装了必备的软件了,但是Mac下Xcode也有一个程序叫ctags,而且mac也自带vim,所以我们需要修改系统变量:
sudo vim /etc/paths
系统默认将/usr/bin放在第一行,只需要将/usr/local/bin放在第一行就可以了:
/usr/local/bin
/usr/bin
/bin
/usr/sbin
/sbin
经过这样的配置,就可以使用最新版的vim了。
用ctags和cscope解析代码
接下来在代码的根目录运行:
ctags -R
cscope -Rbq
使用vundle自动安装相关插件并配置
粘贴这段内容到.vimrc中:
"设置vundle
set nocompatible " be iMproved
filetype off " required!
set rtp+=~/.vim/bundle/vundle/
call vundle##rc()
Bundle 'scrooloose/nerdtree' "文件浏览
Bundle 'majutsushi/tagbar' "代码符号
Bundle 'wesleyche/SrcExpl' "类似sourceInsight的代码预览窗口
filetype plugin indent on " required!
"vundle设置完毕
syntax on
let g:tagbar_ctags_bin='/usr/local/bin/ctags'
let g:tagbar_left = 1
nnoremap <F3> :TagbarToggle<CR>
let NERDTreeWinPos='right'
nnoremap <F2> :NERDTreeToggle<CR>
nmap <F4> :SrcExplToggle<CR>
let g:Srcexpl_winHeight = 8
" // Set 100 ms for refreshing the Source Explorer
let g:SrcExpl_refreshTime = 100
" // Set "Enter" key to jump into the exact definition context
let g:SrcExpl_jumpKey = "<ENTER>"
" // Set "Space" key for back from the definition context
let g:SrcExpl_gobackKey = "<SPACE>"
let g:SrcExpl_pluginList = [
\ "__Tag_List__",
\ "_NERD_tree_"
\ ]
set tags=tags;/ "搜索上一级建立的tag
nmap <C-H> <C-W>h "control+h进入左边的窗口
nmap <C-J> <C-W>j "control+j进入下边的窗口
nmap <C-K> <C-W>k "control+k进入上边的窗口
nmap <C-L> <C-W>l "control+l进入右边的窗口
保存后,再使用vim后,发现报错,报错如下:
Error detected while processing /Users/lizhiyong/.vimrc:
line 6:
E117: Unknown function: vundle##rc
line 8:
E492: Not an editor command: Bundle 'scrooloose/nerdtree' "文件浏览
line 9:
E492: Not an editor command: Bundle 'majutsushi/tagbar' "代码符号
line 10:
E492: Not an editor command: Bundle 'wesleyche/SrcExpl' "类似sourceInsight的代码预览窗口
Press ENTER or type command to continue
提示的错误是在.vimrc中不认识vundle及Bundle这两个函数,解决办法就是安装vundle
vundle,基于git仓库的插件管理软件。
vundle将插件的安装简化为类似yum软件安装的过程,只要:BundleInstall插件就安装完了,:BundleClean之后插件就卸载了。
更换机器时,在新机器上安装vundle并使用老的vundle配置,即可安装所有配置好的插件。
安装:
$ git clone http://github.com/gmarik/vundle.git ~/.vim/bundle/vundle
保存后,重新启动vim,按ESC后输入:BundleInstall后回车,系统会自动安装这些插件。
安装过程也比较诗意
安装完成后重新启动vim,这时按下F2,F3,F4,就看到比较新颖的东西了。如果在mac上执行F2 F3 F4是执行屏幕操作的话,那就配合使用fn键。