Cisco 2621 ADSL 配置

net527

于 2010-05-11 16:26:00 发布

阅读量384

点赞数

CC 4.0 BY-SA版权

文章标签： cisco interface authentication server linux list

本文链接：https://blog.youkuaiyun.com/net527/article/details/5579233

本文详细介绍了ADSL路由器的具体配置内容，包括了主机名设置、密码保护、接口配置、PPPoe连接参数、NAT地址转换规则及路由设定等。通过这些配置实现了家庭或小型办公网络的互联网接入。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

C2621-ADSL#sh run
hostname C2621-ADSL
!
enable secret 5 $1$WEvl$zaAOFw/rGdaovjcRbDKvy0
vpdn enable
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
pppoe enable
pppoe-client dial-pool-number 1
!
interface FastEthernet0/1
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip tcp adjust-mss 1452
duplex auto
speed auto
!
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxx password 0 xxxxx
!
ip nat inside source list 1 interface Dialer1 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
!
!
access-list 1 permit 192.168.1.0 0.0.0.255
dialer-list 1 protocol ip permit
!
line con 0
line aux 0
line vty 0 4
password cisco
login
end