U-Boot 2010.09-jibe-4-b1dev-00004-g1aade5f (Jul 27 2012 - 13:04:44)
//上面显示的是uboot的内核
DRAM: 128 MiB
Flash: 32 MiB
NAND: 512 MiB
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
*** Warning - bad CRC or NAND, using default environment
Hit any key to stop autoboot: 0
Loading from nand0, offset 0x300000
Image Name: Linux-2.6.36.4-2-b1dev-maxim-jib
Created: 2012-08-09 10:30:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2305788 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Automatic boot of image at addr 0x70400000 ...
## Booting kernel from Legacy Image at 70400000 ...
Image Name: Linux-2.6.36.4-2-b1dev-maxim-jib
Created: 2012-08-09 10:30:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2305788 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty (gideon@maxim-hk) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #13 PREEMPT Thu Aug 9 18:30:47 HKT 2012
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Maxim ASP
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c043c5d8, node_mem_map c0879000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] CPU: found DTCM0 4k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM0 4k to fffe8000, enabled
[ 0.000000] CPU: found ITCM0 4k @ 00600000, enabled
[ 0.000000] CPU: moved ITCM0 4k to fffe0000, enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: mem=128M console=tty0 consoleblank=0 console=ttyS0,57600 mtdparts=maximasp_nand.0:2M(u-boot)ro,512k(env0)ro,512k(env1)ro,4M(kernel0),4M(kernel1),5M(kernel2),100M(root0),100M(root1),-(other) rw ubi.mtd=root0 root=ubi0:rootfs rootfstype=ubifs earlyprintk debug user_debug=28 maximasp.board=EEKv1.3.x maximasp.kernel=maximasp_nand.0:kernel0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 121268k/121268k available, 9804k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] DTCM : 0xfffe8000 - 0xfffe9000 ( 4 kB)
[ 0.000000] ITCM : 0xfffe0000 - 0xfffe1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfe000000 ( 856 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0028000 ( 128 kB)
[ 0.000000] .text : 0xc0028000 - 0xc040c000 (3984 kB)
[ 0.000000] .data : 0xc040c000 - 0xc043cc80 ( 196 kB)
[ 0.000000] NR_IRQS:224
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Linux version 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty (gideon@maxim-hk) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #13 PREEMPT Thu Aug 9 18:30:47 HKT 2012
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Maxim ASP
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c043c5d8, node_mem_map c0879000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] CPU: found DTCM0 4k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM0 4k to fffe8000, enabled
[ 0.000000] CPU: found ITCM0 4k @ 00600000, enabled
[ 0.000000] CPU: moved ITCM0 4k to fffe0000, enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: mem=128M console=tty0 consoleblank=0 console=ttyS0,57600 mtdparts=maximasp_nand.0:2M(u-boot)ro,512k(env0)ro,512k(env1)ro,4M(kernel0),4M(kernel1),5M(kernel2),100M(root0),100M(root1),-(other) rw ubi.mtd=root0 root=ubi0:rootfs rootfstype=ubifs earlyprintk debug user_debug=28 maximasp.board=EEKv1.3.x maximasp.kernel=maximasp_nand.0:kernel0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 121268k/121268k available, 9804k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] DTCM : 0xfffe8000 - 0xfffe9000 ( 4 kB)
[ 0.000000] ITCM : 0xfffe0000 - 0xfffe1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfe000000 ( 856 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0028000 ( 128 kB)
[ 0.000000] .text : 0xc0028000 - 0xc040c000 (3984 kB)
[ 0.000000] .data : 0xc040c000 - 0xc043cc80 ( 196 kB)
[ 0.000000] NR_IRQS:224
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3679 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.140000] Calibrating delay loop... 191.28 BogoMIPS (lpj=956416)
[ 0.360000] pid_max: default: 32768 minimum: 301
[ 0.370000] Mount-cache hash table entries: 512
[ 0.390000] CPU: Testing write buffer coherency: ok
[ 0.450000] NET: Registered protocol family 16
[ 0.500000] bio: create slab <bio-0> at 0
[ 0.520000] SCSI subsystem initialized
[ 0.530000] usbcore: registered new interface driver usbfs
[ 0.540000] usbcore: registered new interface driver hub
[ 0.550000] usbcore: registered new device driver usb
[ 0.570000] Switching to clocksource maximasp-timer.1
[ 0.620000] NET: Registered protocol family 2
[ 0.630000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.650000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.660000] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.680000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.690000] TCP reno registered
[ 0.700000] UDP hash table entries: 64 (order: 0, 5120 bytes)
[ 0.710000] UDP-Lite hash table entries: 64 (order: 0, 5120 bytes)
[ 0.730000] NET: Registered protocol family 1
[ 0.740000] RPC: Registered udp transport module.
[ 0.750000] RPC: Registered tcp transport module.
[ 0.760000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.780000] maximasp-dma maximasp-dma.0: v0.4-b1 at 0xffe05000 (various irqs)
[ 0.810000] msgmni has been set to 236
[ 0.840000] alg: No test for stdrng (krng)
[ 0.860000] io scheduler noop registered
[ 0.860000] io scheduler cfq registered (default)
[ 0.940000] Console: switching to colour frame buffer device 80x24
[ 0.960000] maximasp-clcd maximasp-clcd.0: registered frame buffer
[ 0.980000] maximasp-rng maximasp-rng.0: v0.1 loaded
[ 1.000000] maximasp-uart.0: ttyS0 at MMIO 0xffe28000 (irq = 16) is a maximasp
[ 1.020000] console [ttyS0] enabled, bootconsole disabled
[ 1.020000] console [ttyS0] enabled, bootconsole disabled
[ 1.050000] maximasp-uart maximasp-uart.0: v0.6 loaded
[ 1.070000] maximasp-uart.1: ttyS1 at MMIO 0xffe29000 (irq = 17) is a maximasp
[ 1.090000] maximasp-uart maximasp-uart.1: v0.6 loaded
[ 1.120000] loop: module loaded
[ 1.140000] maximasp-sci: Smartcard core v0.3 loaded
[ 1.150000] maximasp-sci: ISO7816 protocol v0.3 loaded
[ 1.170000] maximasp-sci: EMV protocol v0.3 loaded
[ 1.190000] physmap platform flash device: 02000000 at 40000000
[ 1.210000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 1.240000] Amd/Fujitsu Extended Query Table at 0x0040
[ 1.250000] Amd/Fujitsu Extended Query version 1.3.
[ 1.270000] number of CFI chips: 1
[ 1.290000] RedBoot partition parsing not available
[ 1.310000] Maxim ASP platform NVRAM MTD
[ 1.330000] Maxim ASP platform SNVRAM MTD
[ 1.360000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit)
[ 1.380000] Bad block table found at page 262080, version 0x01
[ 1.400000] Bad block table found at page 262016, version 0x01
[ 1.420000] 9 cmdlinepart partitions found on MTD device maximasp_nand.0
[ 1.440000] Creating 9 MTD partitions on "maximasp_nand.0":
[ 1.450000] 0x000000000000-0x000000200000 : "u-boot"
[ 1.470000] 0x000000200000-0x000000280000 : "env0"
[ 1.490000] 0x000000280000-0x000000300000 : "env1"
[ 1.510000] 0x000000300000-0x000000700000 : "kernel0"
[ 1.530000] 0x000000700000-0x000000b00000 : "kernel1"
[ 1.550000] 0x000000b00000-0x000001000000 : "kernel2"
[ 1.570000] 0x000001000000-0x000007400000 : "root0"
[ 1.590000] 0x000007400000-0x00000d800000 : "root1"
[ 1.610000] 0x00000d800000-0x000020000000 : "other"
[ 1.640000] UBI: attaching mtd9 to ubi0
[ 1.650000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 1.660000] UBI: logical eraseblock size: 129024 bytes
[ 1.680000] UBI: smallest flash I/O unit: 2048
[ 1.690000] UBI: sub-page size: 512
[ 1.700000] UBI: VID header offset: 512 (aligned 512)
[ 1.720000] UBI: data offset: 2048
[ 1.900000] UBI: max. sequence number: 242
[ 1.940000] UBI: attached mtd9 to ubi0
[ 1.950000] UBI: MTD device name: "root0"
[ 1.960000] UBI: MTD device size: 100 MiB
[ 1.970000] UBI: number of good PEBs: 800
[ 1.990000] UBI: number of bad PEBs: 0
[ 2.000000] UBI: max. allowed volumes: 128
[ 2.010000] UBI: wear-leveling threshold: 4096
[ 2.020000] UBI: number of internal volumes: 1
[ 2.030000] UBI: number of user volumes: 1
[ 2.050000] UBI: available PEBs: 0
[ 2.060000] UBI: total number of reserved PEBs: 800
[ 2.070000] UBI: number of PEBs reserved for bad PEB handling: 8
[ 2.090000] UBI: max/mean erase counter: 3/1
[ 2.100000] UBI: image sequence number: 172816586
[ 2.110000] UBI: background thread "ubi_bgt0d" started, PID 42
[ 2.130000] maximasp-spi maximasp-spi.1: v0.24-b1 at 0xffe31000 (irq 20)
[ 2.150000] maximasp-spi maximasp-spi.2: v0.24-b1 at 0xffe32000 (irq 21)
[ 2.170000] macb macb.0: invalid hw address, using random
[ 2.200000] MACB_mii_bus: probed
[ 2.210000] eth0: MACB at 0xffe70000 irq 27 (5a:0e:c1:96:5c:0f)
[ 2.230000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:1f, irq=-1)
[ 2.250000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.270000] maximasp-ohci maximasp-ohci: Maxim Integrated Products OHCI
[ 2.290000] maximasp-ohci maximasp-ohci: new USB bus registered, assigned bus number 1
[ 2.310000] maximasp-ohci maximasp-ohci: irq 2, io mem 0xfff50100
[ 2.390000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.410000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.430000] usb usb1: Product: Maxim Integrated Products OHCI
[ 2.450000] usb usb1: Manufacturer: Linux 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty ohci_hcd
[ 2.470000] usb usb1: SerialNumber: maxim
[ 2.490000] hub 1-0:1.0: USB hub found
[ 2.500000] hub 1-0:1.0: 1 port detected
[ 2.520000] Initializing USB Mass Storage driver...
[ 2.540000] usbcore: registered new interface driver usb-storage
[ 2.550000] USB Mass Storage support registered.
[ 2.570000] input: kbd as /devices/virtual/input/input0
[ 2.590000] maximasp-kbd maximasp-kbd.0: v2 at 0xffe68000 (irq 24)
[ 2.610000] maximasp-rtc: dev (254:0)
[ 2.620000] maximasp-rtc maximasp-rtc.0: rtc core: registered maximasp-rtc as rtc0
[ 2.650000] maximasp-rtc maximasp-rtc.0: v0.1 at 0xffe52000 (irq 6)
[ 2.680000] IRQ 69 GPIO 0 INDEX 5: falling edge
[ 2.690000] input: max11801_ts as /devices/platform/maximasp-i2c.0/i2c-0/0-0048/input/input1
[ 2.720000] maximasp-i2c maximasp-i2c.0: v0.2 bus_frequency=100000Hz at 0xffe40000 (irq 14)
[ 2.750000] sdhci: Secure Digital Host Controller Interface driver
[ 2.750000] sdhci: Copyright(c) Pierre Ossman
[ 2.750000] Registered led device: mmc0::
[ 2.800000] mmc0: SDHCI controller on maximasp-sdhci [maximasp-sdhci.0] using DMA
[ 2.800000] maximasp-sdhci maximasp-sdhci.0: v0.2 at 0xfff5c000 (irq 26)
[ 2.800000] Registered led device: led-heartbeat
[ 2.800000] Registered led device: lcd-backlight
[ 2.830000] maximasp-crypto maximasp-crypto.0: v0.8-b1 at 0xffe57000 (irq 37)
[ 2.830000] alg: cipher: Test 1 failed on encryption for maximasp-aes
[ 2.830000] 00000000: b4 9c 0c eb cb 50 c2 c7 fb 0d 58 ff f8 bf c3 62
[ 2.830000] maximasp-aes maximasp-aes.0: v0.2 at 0xffe56000 (irq 5)
[ 2.860000] alg: cipher: Test 1 failed on encryption for maximasp-des
[ 2.860000] 00000000: a8 65 50 d1 3d 3d d1 83
[ 2.860000] alg: cipher: Test 1 failed on encryption for maximasp-des
[ 2.860000] 00000000: 40 8a d5 8f 50 fb ca 1b
[ 2.860000] maximasp-des maximasp-des.0: v0.1 at 0xffe55000 (irq 38)
[ 2.860000] TCP cubic registered
[ 2.860000] NET: Registered protocol family 17
[ 3.120000] maximasp-rtc maximasp-rtc.0: setting system clock to 1970-03-08 01:52:32 UTC (5709152)
[ 3.230000] UBIFS: recovery needed
[ 3.370000] UBIFS: recovery completed
[ 3.380000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.400000] UBIFS: file system size: 100251648 bytes (97902 KiB, 95 MiB, 777 LEBs)
[ 3.420000] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 3.440000] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 3.460000] UBIFS: default compressor: lzo
[ 3.470000] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 3.490000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 3.510000] Freeing TCM link memory: 4K
[ 3.520000] Freeing init memory: 128K
Starting portmap: done
Starting rngd: done
Initializing random number generator... done.
Set system time using the RTC: done, Sun Mar 8 02:52:33 CET 1970
Starting network...
udhcpc (v1.17.4) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting dropbear sshd: OK
Welcome to Maxim JIBE (MAX32590) EEK board!
jibe-eek login: MaximASP> version
Password:
U-Boot 2010.09-jibe-4-b1dev-00004-g1aade5f (Jul 27 2012 - 13:04:44)Login incorrect
jibe-eek login:
//上面显示的是uboot的内核
DRAM: 128 MiB
Flash: 32 MiB
NAND: 512 MiB
Bad block table found at page 262080, version 0x01
Bad block table found at page 262016, version 0x01
*** Warning - bad CRC or NAND, using default environment
Hit any key to stop autoboot: 0
Loading from nand0, offset 0x300000
Image Name: Linux-2.6.36.4-2-b1dev-maxim-jib
Created: 2012-08-09 10:30:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2305788 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Automatic boot of image at addr 0x70400000 ...
## Booting kernel from Legacy Image at 70400000 ...
Image Name: Linux-2.6.36.4-2-b1dev-maxim-jib
Created: 2012-08-09 10:30:55 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2305788 Bytes = 2.2 MiB
Load Address: 70008000
Entry Point: 70008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty (gideon@maxim-hk) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #13 PREEMPT Thu Aug 9 18:30:47 HKT 2012
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Maxim ASP
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c043c5d8, node_mem_map c0879000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] CPU: found DTCM0 4k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM0 4k to fffe8000, enabled
[ 0.000000] CPU: found ITCM0 4k @ 00600000, enabled
[ 0.000000] CPU: moved ITCM0 4k to fffe0000, enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: mem=128M console=tty0 consoleblank=0 console=ttyS0,57600 mtdparts=maximasp_nand.0:2M(u-boot)ro,512k(env0)ro,512k(env1)ro,4M(kernel0),4M(kernel1),5M(kernel2),100M(root0),100M(root1),-(other) rw ubi.mtd=root0 root=ubi0:rootfs rootfstype=ubifs earlyprintk debug user_debug=28 maximasp.board=EEKv1.3.x maximasp.kernel=maximasp_nand.0:kernel0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 121268k/121268k available, 9804k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] DTCM : 0xfffe8000 - 0xfffe9000 ( 4 kB)
[ 0.000000] ITCM : 0xfffe0000 - 0xfffe1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfe000000 ( 856 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0028000 ( 128 kB)
[ 0.000000] .text : 0xc0028000 - 0xc040c000 (3984 kB)
[ 0.000000] .data : 0xc040c000 - 0xc043cc80 ( 196 kB)
[ 0.000000] NR_IRQS:224
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Linux version 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty (gideon@maxim-hk) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #13 PREEMPT Thu Aug 9 18:30:47 HKT 2012
[ 0.000000] CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Maxim ASP
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 32768
[ 0.000000] free_area_init_node: node 0, pgdat c043c5d8, node_mem_map c0879000
[ 0.000000] Normal zone: 256 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 32512 pages, LIFO batch:7
[ 0.000000] CPU: found DTCM0 4k @ 00000000, not enabled
[ 0.000000] CPU: moved DTCM0 4k to fffe8000, enabled
[ 0.000000] CPU: found ITCM0 4k @ 00600000, enabled
[ 0.000000] CPU: moved ITCM0 4k to fffe0000, enabled
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
[ 0.000000] Kernel command line: mem=128M console=tty0 consoleblank=0 console=ttyS0,57600 mtdparts=maximasp_nand.0:2M(u-boot)ro,512k(env0)ro,512k(env1)ro,4M(kernel0),4M(kernel1),5M(kernel2),100M(root0),100M(root1),-(other) rw ubi.mtd=root0 root=ubi0:rootfs rootfstype=ubifs earlyprintk debug user_debug=28 maximasp.board=EEKv1.3.x maximasp.kernel=maximasp_nand.0:kernel0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 121268k/121268k available, 9804k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] DTCM : 0xfffe8000 - 0xfffe9000 ( 4 kB)
[ 0.000000] ITCM : 0xfffe0000 - 0xfffe1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xfe000000 ( 856 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0028000 ( 128 kB)
[ 0.000000] .text : 0xc0028000 - 0xc040c000 (3984 kB)
[ 0.000000] .data : 0xc040c000 - 0xc043cc80 ( 196 kB)
[ 0.000000] NR_IRQS:224
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.000000] ... MAX_LOCK_DEPTH: 48
[ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
[ 0.000000] ... CLASSHASH_SIZE: 4096
[ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
[ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
[ 0.000000] ... CHAINHASH_SIZE: 16384
[ 0.000000] memory used by lock dependency info: 3679 kB
[ 0.000000] per task-struct memory footprint: 1152 bytes
[ 0.140000] Calibrating delay loop... 191.28 BogoMIPS (lpj=956416)
[ 0.360000] pid_max: default: 32768 minimum: 301
[ 0.370000] Mount-cache hash table entries: 512
[ 0.390000] CPU: Testing write buffer coherency: ok
[ 0.450000] NET: Registered protocol family 16
[ 0.500000] bio: create slab <bio-0> at 0
[ 0.520000] SCSI subsystem initialized
[ 0.530000] usbcore: registered new interface driver usbfs
[ 0.540000] usbcore: registered new interface driver hub
[ 0.550000] usbcore: registered new device driver usb
[ 0.570000] Switching to clocksource maximasp-timer.1
[ 0.620000] NET: Registered protocol family 2
[ 0.630000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.650000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.660000] TCP bind hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.680000] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.690000] TCP reno registered
[ 0.700000] UDP hash table entries: 64 (order: 0, 5120 bytes)
[ 0.710000] UDP-Lite hash table entries: 64 (order: 0, 5120 bytes)
[ 0.730000] NET: Registered protocol family 1
[ 0.740000] RPC: Registered udp transport module.
[ 0.750000] RPC: Registered tcp transport module.
[ 0.760000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.780000] maximasp-dma maximasp-dma.0: v0.4-b1 at 0xffe05000 (various irqs)
[ 0.810000] msgmni has been set to 236
[ 0.840000] alg: No test for stdrng (krng)
[ 0.860000] io scheduler noop registered
[ 0.860000] io scheduler cfq registered (default)
[ 0.940000] Console: switching to colour frame buffer device 80x24
[ 0.960000] maximasp-clcd maximasp-clcd.0: registered frame buffer
[ 0.980000] maximasp-rng maximasp-rng.0: v0.1 loaded
[ 1.000000] maximasp-uart.0: ttyS0 at MMIO 0xffe28000 (irq = 16) is a maximasp
[ 1.020000] console [ttyS0] enabled, bootconsole disabled
[ 1.020000] console [ttyS0] enabled, bootconsole disabled
[ 1.050000] maximasp-uart maximasp-uart.0: v0.6 loaded
[ 1.070000] maximasp-uart.1: ttyS1 at MMIO 0xffe29000 (irq = 17) is a maximasp
[ 1.090000] maximasp-uart maximasp-uart.1: v0.6 loaded
[ 1.120000] loop: module loaded
[ 1.140000] maximasp-sci: Smartcard core v0.3 loaded
[ 1.150000] maximasp-sci: ISO7816 protocol v0.3 loaded
[ 1.170000] maximasp-sci: EMV protocol v0.3 loaded
[ 1.190000] physmap platform flash device: 02000000 at 40000000
[ 1.210000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
[ 1.240000] Amd/Fujitsu Extended Query Table at 0x0040
[ 1.250000] Amd/Fujitsu Extended Query version 1.3.
[ 1.270000] number of CFI chips: 1
[ 1.290000] RedBoot partition parsing not available
[ 1.310000] Maxim ASP platform NVRAM MTD
[ 1.330000] Maxim ASP platform SNVRAM MTD
[ 1.360000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xdc (Micron NAND 512MiB 3,3V 8-bit)
[ 1.380000] Bad block table found at page 262080, version 0x01
[ 1.400000] Bad block table found at page 262016, version 0x01
[ 1.420000] 9 cmdlinepart partitions found on MTD device maximasp_nand.0
[ 1.440000] Creating 9 MTD partitions on "maximasp_nand.0":
[ 1.450000] 0x000000000000-0x000000200000 : "u-boot"
[ 1.470000] 0x000000200000-0x000000280000 : "env0"
[ 1.490000] 0x000000280000-0x000000300000 : "env1"
[ 1.510000] 0x000000300000-0x000000700000 : "kernel0"
[ 1.530000] 0x000000700000-0x000000b00000 : "kernel1"
[ 1.550000] 0x000000b00000-0x000001000000 : "kernel2"
[ 1.570000] 0x000001000000-0x000007400000 : "root0"
[ 1.590000] 0x000007400000-0x00000d800000 : "root1"
[ 1.610000] 0x00000d800000-0x000020000000 : "other"
[ 1.640000] UBI: attaching mtd9 to ubi0
[ 1.650000] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 1.660000] UBI: logical eraseblock size: 129024 bytes
[ 1.680000] UBI: smallest flash I/O unit: 2048
[ 1.690000] UBI: sub-page size: 512
[ 1.700000] UBI: VID header offset: 512 (aligned 512)
[ 1.720000] UBI: data offset: 2048
[ 1.900000] UBI: max. sequence number: 242
[ 1.940000] UBI: attached mtd9 to ubi0
[ 1.950000] UBI: MTD device name: "root0"
[ 1.960000] UBI: MTD device size: 100 MiB
[ 1.970000] UBI: number of good PEBs: 800
[ 1.990000] UBI: number of bad PEBs: 0
[ 2.000000] UBI: max. allowed volumes: 128
[ 2.010000] UBI: wear-leveling threshold: 4096
[ 2.020000] UBI: number of internal volumes: 1
[ 2.030000] UBI: number of user volumes: 1
[ 2.050000] UBI: available PEBs: 0
[ 2.060000] UBI: total number of reserved PEBs: 800
[ 2.070000] UBI: number of PEBs reserved for bad PEB handling: 8
[ 2.090000] UBI: max/mean erase counter: 3/1
[ 2.100000] UBI: image sequence number: 172816586
[ 2.110000] UBI: background thread "ubi_bgt0d" started, PID 42
[ 2.130000] maximasp-spi maximasp-spi.1: v0.24-b1 at 0xffe31000 (irq 20)
[ 2.150000] maximasp-spi maximasp-spi.2: v0.24-b1 at 0xffe32000 (irq 21)
[ 2.170000] macb macb.0: invalid hw address, using random
[ 2.200000] MACB_mii_bus: probed
[ 2.210000] eth0: MACB at 0xffe70000 irq 27 (5a:0e:c1:96:5c:0f)
[ 2.230000] eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=0:1f, irq=-1)
[ 2.250000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.270000] maximasp-ohci maximasp-ohci: Maxim Integrated Products OHCI
[ 2.290000] maximasp-ohci maximasp-ohci: new USB bus registered, assigned bus number 1
[ 2.310000] maximasp-ohci maximasp-ohci: irq 2, io mem 0xfff50100
[ 2.390000] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.410000] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.430000] usb usb1: Product: Maxim Integrated Products OHCI
[ 2.450000] usb usb1: Manufacturer: Linux 2.6.36.4-2-b1dev-maxim-jibe-b1-00012-g589ff3a-dirty ohci_hcd
[ 2.470000] usb usb1: SerialNumber: maxim
[ 2.490000] hub 1-0:1.0: USB hub found
[ 2.500000] hub 1-0:1.0: 1 port detected
[ 2.520000] Initializing USB Mass Storage driver...
[ 2.540000] usbcore: registered new interface driver usb-storage
[ 2.550000] USB Mass Storage support registered.
[ 2.570000] input: kbd as /devices/virtual/input/input0
[ 2.590000] maximasp-kbd maximasp-kbd.0: v2 at 0xffe68000 (irq 24)
[ 2.610000] maximasp-rtc: dev (254:0)
[ 2.620000] maximasp-rtc maximasp-rtc.0: rtc core: registered maximasp-rtc as rtc0
[ 2.650000] maximasp-rtc maximasp-rtc.0: v0.1 at 0xffe52000 (irq 6)
[ 2.680000] IRQ 69 GPIO 0 INDEX 5: falling edge
[ 2.690000] input: max11801_ts as /devices/platform/maximasp-i2c.0/i2c-0/0-0048/input/input1
[ 2.720000] maximasp-i2c maximasp-i2c.0: v0.2 bus_frequency=100000Hz at 0xffe40000 (irq 14)
[ 2.750000] sdhci: Secure Digital Host Controller Interface driver
[ 2.750000] sdhci: Copyright(c) Pierre Ossman
[ 2.750000] Registered led device: mmc0::
[ 2.800000] mmc0: SDHCI controller on maximasp-sdhci [maximasp-sdhci.0] using DMA
[ 2.800000] maximasp-sdhci maximasp-sdhci.0: v0.2 at 0xfff5c000 (irq 26)
[ 2.800000] Registered led device: led-heartbeat
[ 2.800000] Registered led device: lcd-backlight
[ 2.830000] maximasp-crypto maximasp-crypto.0: v0.8-b1 at 0xffe57000 (irq 37)
[ 2.830000] alg: cipher: Test 1 failed on encryption for maximasp-aes
[ 2.830000] 00000000: b4 9c 0c eb cb 50 c2 c7 fb 0d 58 ff f8 bf c3 62
[ 2.830000] maximasp-aes maximasp-aes.0: v0.2 at 0xffe56000 (irq 5)
[ 2.860000] alg: cipher: Test 1 failed on encryption for maximasp-des
[ 2.860000] 00000000: a8 65 50 d1 3d 3d d1 83
[ 2.860000] alg: cipher: Test 1 failed on encryption for maximasp-des
[ 2.860000] 00000000: 40 8a d5 8f 50 fb ca 1b
[ 2.860000] maximasp-des maximasp-des.0: v0.1 at 0xffe55000 (irq 38)
[ 2.860000] TCP cubic registered
[ 2.860000] NET: Registered protocol family 17
[ 3.120000] maximasp-rtc maximasp-rtc.0: setting system clock to 1970-03-08 01:52:32 UTC (5709152)
[ 3.230000] UBIFS: recovery needed
[ 3.370000] UBIFS: recovery completed
[ 3.380000] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[ 3.400000] UBIFS: file system size: 100251648 bytes (97902 KiB, 95 MiB, 777 LEBs)
[ 3.420000] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
[ 3.440000] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 3.460000] UBIFS: default compressor: lzo
[ 3.470000] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 3.490000] VFS: Mounted root (ubifs filesystem) on device 0:12.
[ 3.510000] Freeing TCM link memory: 4K
[ 3.520000] Freeing init memory: 128K
Starting portmap: done
Starting rngd: done
Initializing random number generator... done.
Set system time using the RTC: done, Sun Mar 8 02:52:33 CET 1970
Starting network...
udhcpc (v1.17.4) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Starting dropbear sshd: OK
Welcome to Maxim JIBE (MAX32590) EEK board!
jibe-eek login: MaximASP> version
Password:
U-Boot 2010.09-jibe-4-b1dev-00004-g1aade5f (Jul 27 2012 - 13:04:44)Login incorrect
jibe-eek login:
扫一扫
528
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
