洛谷-1605 迷宫

洛谷题目解析之P1605——迷宫(附带DFS算法解析) 然后判断有没有走过,这时候就要用到vis[][]二维数组了,走过就将vis[x][y]设为1,因为vis是判定数组,所以是bool类型。由于有x行y列,所以往左走的时候y坐标-1,往上走x坐标+1,往右走y坐标+1,往下走x坐标+1。第二行为四个正整数 𝑆𝑋,𝑆𝑌,𝐹𝑋,𝐹𝑌,𝑆𝑋,𝑆𝑌 代表起点坐标,𝐹𝑋,𝐹𝑌 代表终点坐标。对于 100% 的数据,1≤𝑁,𝑀≤5,1≤𝑇≤10,1≤𝑆𝑋,𝐹𝑋≤𝑛,1≤𝑆𝑌,𝐹𝑌≤𝑚。比如有一个迷宫(以下用"."代表可走的路,"#"代表墙,左上角是起点,右下角是终点) 阅读详情

题目背景
迷宫 【问题描述】
给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和
终点坐标,问: 每个方格最多经过1次,有多少种从起点坐标到终点坐标的方案。在迷宫
中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。
输入样例 输出样例
【数据规模】
1≤N,M≤5
题目描述
输入输出格式
输入格式:
【输入】
第一行N、M和T,N为行,M为列,T为障碍总数。第二行起点坐标SX,SY,终点
坐标FX,FY。接下来T行,每行为障碍点的坐标。
输出格式:
【输出】
给定起点坐标和终点坐标,问每个方格最多经过1次,从起点坐标到终点坐标的方
案总数。

输入输出样例
输入样例#1:
2 2 1
1 1 2 2
1 2

输出样例#1:
1

解释:范围很小,我们直接暴力统计就好啦,直接上dfs

#include<iostream>
#include<cstdio>
using namespace std;
bool vis[10][10]={0};
int n,m,t;
int x1,y1,x2,y2;
bool used[10][10]={0};
int dir[4][2]={1,0,-1,0,0,-1,0,1};
bool check(int x,int y){
    if(x<=n&&x>=1&&y<=m&&y>=1) return 1;
    return 0;
}
int dfs(int x,int y){
    int ret=0;
    if(x==x2&&y==y2) return 1;
    for(int i=0;i<4;i++){
        int dx=x+dir[i][0];
        int dy=y+dir[i][1];
        if(check(dx,dy)&&!used[dx][dy]&&!vis[dx][dy]){
            used[dx][dy]=1;
            ret+=dfs(dx,dy);
            used[dx][dy]=0;
        }
    }
    return ret;
}
int main(){
    ios::sync_with_stdio(false);
    cin>>n>>m>>t;
    cin>>x1>>y1>>x2>>y2;
    for(int i=1;i<=t;i++){
        int a,b;cin>>a>>b;
        vis[a][b]=1;
    }
    used[x1][y1]=1;
    int ret=dfs(x1,y1);
    cout<<ret<<endl;
    return 0;
}


P1605迷宫——题解 展开 题目背景 给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和终点坐标,问: 每个方格最多经过1次,有多少种从起点坐标到终点坐标的方案。在迷宫中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。 题目描述 无 输入格式 第一行N、M和T,N为行,M为列,T为障碍总数。第二行起点坐标SX,SY,终点坐标FX,FY。接下来T行,每行为障碍点的坐标。 输出格式 给定起点坐标和终点坐标,问每个方格最多经过1次,从起点坐标到终点坐标的方案总数。 输入. 阅读详情

相关推荐

DFS及洛谷P1605迷宫题解

意识到自己很菜已经很久了,今天终于下定决心要把DFS跟BFS好好学一下。虽然已经决定走游戏开发的道路了,但是无论如何,算法都是不能落下的一课。 关于BFS跟DFS的定义,网上已经有很多非常详细的解法了,这里也就不在啰嗦。下面看例题,是洛谷的P1605。上题目。 首先题目是非常经典的迷宫例题,唯一的不同在于,要求每个位置都必须只走一遍。很容易想到用dfs搜索,如果达到终点,那么就把方案总和++。同时我们需要确认当前每一个位置的状态,如果当前位置已经被遍历,那么我们需要把当前位置做好标记,同时需..

qq_62440805的博客 4158

洛谷P1605:迷宫

给定起点坐标和终点坐标,每个方格最多经过一次,问有多少种从起点坐标到终点坐标的方案。在迷宫中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。方格的迷宫,迷宫里有 T 处障碍,障碍处不可通过。第二行为四个正整数 SX,SY,FX,FY。行,每行两个正整数,表示障碍点的坐标。输出从起点坐标到终点坐标的方案总数。,分别表示迷宫的长宽和障碍总数。第一行为三个正整数 N,M,T。代表起点坐标,FX,FY。

m0_73648729的博客 895

Oracle监听配置

Oracle监听配置## 标题 选择“监听程序配置”,然后下一步。 选择重新配置,然后下一步/。 不用管,按下一步。 下一步。 选择“否”,下一步。 选择"本地net服务名配置",然后下一步。 选择“重新配置”,然后下一步。 服务名 是"Oracle",然后下一步。 主机为你的IP地址,在doc系统下通过"ipconfig"获取IP地址。然后输入,然后下一步。 选择“是,进行测试...

m0_46079215的博客 808

P1605 迷宫

P1605 迷宫 深度优先搜索

qq_52079442的博客 480

LSTM cell结构的理解和计算

LSTM是传统RNN网络的扩展,其核心结构是其cell单元,网上LSTM的相关资料繁多,质量参差不齐,下面主要结合LSTM神经网络的详细推导和 Christopher Olah的blog两篇文章中的内容进行说明。主要介绍网络如何计算,为何这么算先不展开:)。前者一副图加上29个公式,简洁明了;后者娓娓道来,适合初学者。首先是LSTM cell最常见的结构图: 这是变形的版本(找不到更清晰的版本了),

songhk0209的博客 2万+

保姆级教程:用海思PQTool搞定ISP图像调试,从参数读取到固件烧录全流程

本文提供海思PQTool的ISP图像调试全流程指南,从参数读取、实时调试到固件烧录,涵盖环境配置、核心功能解析、参数固化及生产部署。通过实战案例和避坑指南,帮助开发者高效提升图像质量,适用于海思开发板的ISP调试与优化。

weixin_30872337的博客 285

洛谷:P1605 迷宫

dfs的模板题,新手必会!!!!

qq_74924951的博客 1423

亚博k210视觉模块与stm32双向通信

【代码】亚博k210视觉模块与stm32双向通信。

w_150831的博客 3246

洛谷1605 迷宫

怎么说呢,这道题真心不难,DFS水题,记下这道题是因为我在做的时候往加了一行,导致有几个例子不过。 //如果你得了70分可以看看 #include<iostream> #include<algorithm> using namespace std; int N,M,T; int sx,sy; int fx,fy; int book[7][7]; int array[7][7...

qq_43601282的博客 315

14、5G物理层的灵活解决方案:广义频分复用(GFDM)

广义频分复用(GFDM)作为一种高度灵活的5G物理层多载波调制方案,能够满足多样化应用场景的需求,包括高吞吐量的比特管道通信、低功耗高连接数的物联网、超低延迟的触觉互联网以及广覆盖的无线区域网。通过参数化配置,GFDM可适配LTE资源网格,实现与现有系统的兼容与共存。其支持多种解调方式、干扰消除技术、OQAM映射及预编码机制,兼具低带外发射、高频谱效率和强鲁棒性。GFDM还能统一描述OFDM、FBMC、FTN等多种经典与先进波形,成为5G及未来通信系统中极具潜力的通用波形框架。

gold8的专栏 109

备考路上的学习笔记:我的软考高级架构师复盘与更新计划

本专栏基于作者备考软考高级系统架构设计师的真实经验,分为考前突击、基础夯实、核心突破、案例实战和论文通关五大模块。内容涵盖计算机体系结构、操作系统、数据库等核心知识,提供案例解析和论文范文。作者承诺持续更新考纲内容、真题复盘及互动答疑,旨在帮助考生系统备考,将个人踩坑经验转化为实用指南,陪伴考生共同完成从知识碎片到体系构建的蜕变历程。

qq837993702的博客 2295

洛谷 P1605 迷宫

一道简单的dfs。 思路 输入n和m,用一个二维数组生成一个bool类型的图(省空间),还有t个障碍,for循环t次输入障碍坐标直接把数组[x][y]改为零就把图生成好了。 dfs如下: int dfs(int x,int y){ if (x==Tx-1&amp;amp;amp;&amp;amp;amp;y==Ty-1){ return 1; } long long sum=0; vis[x][y]=1; for ...

全机房最蒟蒻的博客 946

rknn-toolkit推理yolov5-face.rknn模型--python代码

import os import urllib import traceback import time import sys import numpy as np import cv2 from rknn.api import RKNN ONNX_MODEL = 'yolov5s.onnx' RKNN_MODEL = 'yolov5s.rknn' IMG_PATH = './bus.jpg' DATASET = './dataset.txt' QUANTIZE_ON = True BOX_THR.

C/C++、嵌入式开发、深度学习算法、模型部署与推理优化 3082

洛谷P1605 迷宫

洛谷P1605 迷宫题目:解析:代码: 题目: 给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和终点坐标,问: 每个方格最多经过1次,有多少种从起点坐标到终点坐标的方案。在迷宫中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。 解析: 这道题 和前面的迷宫题很像 他唯一的不同之处 就是 只要输出 数量就可以了 所以我们只要用 题目改就可以了 网址:点...

zliang_ma的博客 302

Cursor自动生成测试用例

或者把你已有的规则直接复制粘贴到这个文档内(这里我用的是Markdown格式和CSV格式的测试用例生成规则,可以同时生成Markdown和CSV格式的测试用例)。在AI对话框这里,我们可以看到Cursor会逐步来帮我们生成测试用例,先分析识别需求文档,然后生成测试用例,最后会进行质量检查,确保生成的用例符合规范。生成的Markdown格式,可直接导入Xmind,生成思维导图,对应到具体的功能模块看具体的测试点,逻辑会更直观一些。(1)选中规则文档和需求文档:@你的测试用例规则文档@你的需求文档。

十二测试录 2434

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

洛谷 P1605 迷宫【DFS基础题,注意回溯】

某天,本蒟蒻打开洛谷想刷几个水题找找自信,于是打开了此题, 洛谷 P1605 迷宫 当时内心os:诶呀这数据可真小啊,不就是dfs入门嘛,看我5分钟AC,这水题真没意思… 于是飞速打出“完美”的代码: #include <bits/stdc++.h> using namespace std; int n,m,xx,yy,t,newx,newy,beginx,beginy,endx,en...

nefu_ljw的博客 733

OV9734 DATASHEET,完整规格书

OV9734完整规格书,包括电气参数,尺寸规格,寄存器配置表等

洛谷 题解 P1605 【迷宫】

洛谷 题解 P1605 【迷宫】 题目 深搜经典例题,必须掌握! 简单说一下深搜,就是一条路走到底,发现不行了就往回走,再走另一条路,直到不能走为止 深搜做迷宫有三大题型:能不能走;怎么走;路径数量,显然这题考的就是路径数量 那怎么做呢? 老样子,一个一个部分来讲解 一、main 函数部分 ① 把已知条件转化为一个二维数组 cin >> n >> m >> t >> sx >> sy >> fx >> fy; fo

williamllk的博客 538

数学建模模型总结

这是本人在两年内准备参加数学建模竞赛搜集到的模型资料,已经经过了本人的筛选和整理,希望能够对准备参加数学建模竞赛的学弟学妹们提供一些帮助!

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

洛谷 | P1605 迷宫

搜索 专题 题目链接:洛谷 P1605 迷宫 题目描述 输入输出格式 时空限制 时间:1000ms 空间:128MB 思路 因为数据比较弱,所以可以先初始化迷宫都为没有障碍,即都可以走路,然后随着输入实时更新迷宫障碍。同时,把每次可以移动的 x 、y 用数据记录,这样每次只要加上相应的 walkx 和 walky 就行。最后,用 深度优先搜索 ,就能得出答案了。 代码 #includ...

Wonz 1685

算法刷题【洛谷P1605】迷宫

异想之旅:本人原创博客完全手敲,绝对非搬运,全网不可能有重复;本人无团队,仅为技术爱好者进行分享,所有内容不牵扯广告。本人所有文章仅在优快云和个人博客(一定是异想之旅域名)发布,除此之外全部是盗文! 洛谷 P1605 迷宫 题目描述 给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和终点坐标,问: 每个方格最多经过1次,有多少种从起点坐标到终点坐标的方案。在迷宫中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。 输入格式 第一行N、M和T,N为行,M为列,T

异想之旅的博客 718

洛谷 P1605 迷宫_题解

题目链接:洛谷 P1605 迷宫 题目描述: 给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和终点坐标,问: 每个方格最多经过1次,有多少种从起点坐标到终点坐标的方案。在迷宫中移动有上下左右四种方式,每次只能移动一个方格。数据保证起点上没有障碍。 输入: 第一行N、M和T,N为行,M为列,T为障碍总数。第二行起点坐标SX,SY,终点坐标FX,FY。接下来T行,每行为障...

ミ渴望ヽ不可及ゞ的博客 903

洛谷P1605迷宫

洛谷P1605迷宫

pys1719886504的博客 324

洛谷 P1605迷宫【DFS】

想法:1.典型的dfs2.注意在开始的时候将st[sx][sy]设为true,起始坐标,深搜时不要再搜回来。否则70分。

2401_82736456的博客 232

洛谷P1605 迷宫 题解

洛谷P1605 迷宫 题解 题目背景 【问题描述】 【数据规模】 【输入】 【输出】 输入输出样例 输入样例#1: 输出样例#1: 题解 C++代码 题目背景 【问题描述】 给定一个N*M方格的迷宫,迷宫里有T处障碍,障碍处不可通过。给定起点坐标和终点坐标,问: 每个方格最多经过1次,有多少种...

weixin_30569001的博客 597
上一篇: 洛谷-1434 [SHOI2002]滑雪
下一篇: 洛谷-1403 [AHOI2005]约数研究
mkopvec
博客等级 码龄8年 22粉丝 331原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值