确认网络环境
开发Web等网络应用程序的时候,需要确认网络环境,连接情况等信息。如果没有处理它们,是不会通过Apple的审查的。
Apple 的 例程 Reachability 中介绍了取得/检测网络状态的方法。在你的程序中使用 Reachability 只须将该例程中的 Reachability.h 和 Reachability.m 拷贝到你的工程中。如下图:
然后将 SystemConfiguration.framework 添加进工程:

Reachability 中定义了3种网络状态。
//
the network state of the device for Reachability 1.5.typedef enum{
NotReachable=
0, ReachableViaCarrierDataNetwork,
ReachableViaWiFiNetwork}
NetworkStatus;//
the network state of the device for Reachability 2.0.typedefenum{NotReachable=
0,ReachableViaWiFi,ReachableViaWWAN}
NetworkStatus;NotReachable//无连接ReachableViaCarrierDataNetwork
(ReachableViaWWAN)//使用3G/GPRS网络ReachableViaWiFiNetwork
(ReachableViaWiFi)//使用WiFi网络//比如检测某一特定站点的接续状况,可以使用下面的代码:Reachability*r=
[ReachabilityreachabilityWithHostName:@“www.apple.com”]; switch([r
currentReachabilityStatus]){
caseNotReachable: //
没有网络连接 break;
caseReachableViaWWAN:
//
使用3G网络break; caseReachableViaWiFi: // 使用WiFi网络break;}//检测当前网络环境//程序启动时,如果想检测可用的网络环境,可以像这样。//
是否wifi+
(BOOL)
IsEnableWIFI{ return([[ReachabilityreachabilityForLocalWiFi]
currentReachabilityStatus] != NotReachable); }
//
是否3G +
(BOOL)
IsEnable3G{ return([[ReachabilityreachabilityForInternetConnection]
currentReachabilityStatus] != NotReachable);}//连接状态实时通知//网络连接状态的实时检查,通知在网络应用中也是十分必要的。接续状态发生变化时,需要及时地通知用户//。由于Reachability1.5版与2.0版有一些变化,这里分开来说明使用方法。Reachability
1.5My.AppDelegate.h
#import"Reachability.h"@interfaceMyAppDelegate:
NSObject<UIApplicationDelegate>
{ NetworkStatusremoteHostStatus;}
@property NetworkStatusremoteHostStatus;
@end//
My.AppDelegate.m #import"MyAppDelegate.h"@implementationMyAppDelegate@synthesizeremoteHostStatus;
//
更新网络状态 -
(void)updateStatus{
self.remoteHostStatus
= [[ReachabilitysharedReachability] remoteHostStatus];}
//
通知网络状态-
(void)reachabilityChanged:(NSNotification*)note{
[selfupdateStatus];
if(self.remoteHostStatus
== NotReachable) {
UIAlertView*alert=
[[UIAlertViewalloc] initWithTitle:NSLocalizedString(@"AppName",
nil)
message:NSLocalizedString(@"NotReachable",
nil)
delegate:nilcancelButtonTitle:@"OK"otherButtonTitles:
nil];
[alert
show]; [alert
release]; }}
//
程序启动器,启动网络监视 -
(void)applicationDidFinishLaunching:(UIApplication*)application{
//
设置网络检测的站点 [[ReachabilitysharedReachability]
setHostName:@"www.apple.com"];
[[ReachabilitysharedReachability]
setNetworkStatusNotificationsEnabled:YES];
//
设置网络状态变化时的通知函数[[NSNotificationCenterdefaultCenter] addObserver:selfselector:@selector(reachabilityChanged:) name:@"kNetworkReachabilityChangedNotification"object:nil]; [selfupdateStatus];}
-
(void)dealloc{//
删除通知对象 [[NSNotificationCenterdefaultCenter]
removeObserver:self];[window
release]; [superdealloc];
}Reachability
2.0/
MyAppDelegate.h @classReachability;@interfaceMyAppDelegate:
NSObject<UIApplicationDelegate>{
Reachability*hostReach;} @end//
MyAppDelegate.m -
(void)reachabilityChanged:(NSNotification*)note{
Reachability*
curReach= [note object]; NSParameterAssert([curReach
isKindOfClass: [Reachabilityclass]]); NetworkStatusstatus=
[curReach currentReachabilityStatus]; if(status
== NotReachable) { UIAlertView*alert=
[[UIAlertViewalloc] initWithTitle:@"AppName""
message:@"NotReachable"delegate:nil cancelButtonTitle:@"YES"otherButtonTitles:nil];
[alert
show]; [alert
release]; }}
-
(void)applicationDidFinishLaunching:(UIApplication
*)application { //
... //
监测网络情况 [[NSNotificationCenter defaultCenter]
addObserver:self selector:@selector(reachabilityChanged:)
name: kReachabilityChangedNotification object:
nil];
hostReach
= [[Reachability reachabilityWithHostName:@"www.google.com"]
retain]; [hostReach
startNotifer]; //
...} |
本文介绍如何在iOS应用中使用Reachability检测网络连接状态,包括3G、WiFi等,并提供了实时通知网络变化的方法。
1908

被折叠的 条评论
为什么被折叠?



