全志H616 GPIO KEY驱动

/*

 * Driver for keys on GPIO lines capable of generating interrupts.

 *

 * Copyright 2005 Phil Blundell

 * Copyright 2010, 2011 David Jander <david@protonic.nl>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */

#include <linux/module.h>

#include <linux/init.h>

#include <linux/fs.h>

#include <linux/interrupt.h>

#include <linux/irq.h>

#include <linux/sched.h>

#include <linux/pm.h>

#include <linux/slab.h>

#include <linux/sysctl.h>

#include <linux/proc_fs.h>

#include <linux/delay.h>

#include <linux/platform_device.h>

#include <linux/input.h>

#include <linux/gpio_keys.h>

#include <linux/workqueue.h>

#include <linux/gpio.h>

#include <linux/gpio/consumer.h>

#include <linux/of.h>

#include <linux/of_platform.h>

#include <linux/of_gpio.h>

#include <linux/of_irq.h>

#include <linux/spinlock.h>

#include <linux/sunxi-gpio.h>

struct gpio_button_data {

    const struct gpio_keys_button *button;

    struct input_dev *input;

    struct gpio_desc *gpiod;

    struct timer_list release_timer;

    unsigned int release_delay; /* in msecs, for IRQ-only buttons */

    struct delayed_work work;

    unsigned int software_debounce; /* in msecs, for GPIO-driven buttons */

    unsigned int irq;

    spinlock_t lock;

    bool disabled;

    bool key_pressed;

};

struct gpio_keys_drvdata {

    const struct gpio_keys_platform_data *pdata;

    struct input_dev *input;

    struct mutex disable_lock;

    struct gpio_button_data data[0];

};

/*

 * SYSFS interface for enabling/disabling keys and switches:

 *

 * There are 4 attributes under /sys/devices/platform/gpio-keys/

 *  keys [ro]              - bitmap of keys (EV_KEY) which can be

 *                           disabled

 *  switches [ro]          - bitmap of switches (EV_SW) which can be

 *                           disabled

 *  disabled_keys [rw]     - bitmap of keys currently disabled

 *  disabled_switches [rw] - bitmap of switches currently disabled

 *

 * Userland can change these values and hence disable event generation

 * for each key (or switch). Disabling a key means its interrupt line

 * is disabled.

 *

 * For example, if we have following switches set up as gpio-keys:

 *  SW_DOCK = 5

 *  SW_CAMERA_LENS_COVER = 9

 *  SW_KEYPAD_SLIDE = 10

 *  SW_FRONT_PROXIMITY = 11

 * This is read from switches:

 *  11-9,5

 * Next we want to disable proximity (11) and dock (5), we write:

 *  11,5

 * to file disabled_switches. Now proximity and dock IRQs are disabled.

 * This can be verified by reading the file disabled_switches:

 *  11,5

 * If we now want to enable proximity (11) switch we write:

 *  5

 * to disabled_switches.

 *

 * We can disable only those keys which don't allow sharing the irq.

 */

/**

 * get_n_events_by_type() - returns maximum number of events per @type

 * @type: type of button (%EV_KEY, %EV_SW)

 *

 * Return value of this function can be used to allocate bitmap

 * large enough to hold all bits for given type.

 */

static int get_n_events_by_type(int type)

{

    BUG_ON(type != EV_SW && type != EV_KEY);

    return (type == EV_KEY) ? KEY_CNT : SW_CNT;

}

/**

 * get_bm_events_by_type() - returns bitmap of supported events per @type

 * @input: input device from which bitmap is retrieved

 * @type: type of button (%EV_KEY, %EV_SW)

 *

 * Return value of this function can be used to allocate bitmap

 * large enough to hold all bits for given type.

 */

static const unsigned long *get_bm_events_by_type(struct input_dev *dev,

                          int type)

{

    BUG_ON(type != EV_SW && type != EV_KEY);

    return (type == EV_KEY) ? dev->keybit : dev->swbit;

}

/**

 * gpio_keys_disable_button() - disables given GPIO button

 * @bdata: button data for button to be disabled

 *

 * Disables button pointed by @bdata. This is done by masking

 * IRQ line. After this function is called, button won't generate

 * input events anymore. Note that one can only disable buttons

 * that don't share IRQs.

 *

 * Make sure that @bdata->disable_lock is locked when entering

 * this function to avoid races when concurrent threads are

 * disabling buttons at the same time.

 */

static void gpio_keys_disable_button(struct gpio_button_data *bdata)

{

    if (!bdata->disabled) {

        /*

         * Disable IRQ and associated timer/work structure.

         */

        disable_irq(bdata->irq);

        if (bdata->gpiod)

            cancel_delayed_work_sync(&bdata->work);

        else

            del_timer_sync(&bdata->release_timer);

        bdata->disabled = true;

    }

}

/**

 * gpio_keys_enable_button() - enables given GPIO button

 * @bdata: button data for button to be disabled

 *

 * Enables given button pointed by @bdata.

 *

 * Make sure that @bdata->disable_lock is locked when entering

 * this function to avoid races with concurrent threads trying

 * to enable the same button at the same time.

 */

static void gpio_keys_enable_button(struct gpio_button_data *bdata)

{

    if (bdata->disabled) {

        enable_irq(bdata->irq);

        bdata->disabled = false;

    }

}

/**

 * gpio_keys_attr_show_helper() - fill in stringified bitmap of buttons

 * @ddata: pointer to drvdata

 * @buf: buffer where stringified bitmap is written

 * @type: button type (%EV_KEY, %EV_SW)

 * @only_disabled: does caller want only those buttons that are

 *                 currently disabled or all buttons that can be

 *                 disabled

 *

 * This function writes buttons that can be disabled to @buf. If

 * @only_disabled is true, then @buf contains only those buttons

 * that are currently disabled. Returns 0 on success or negative

 * errno on failure.

 */

static ssize_t gpio_keys_attr_show_helper(struct gpio_keys_drvdata *ddata,

                      char *buf, unsigned int type,

                      bool only_disabled)

{

    int n_events = get_n_events_by_type(type);

    unsigned long *bits;

    ssize_t ret;

    int i;

    bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);

    if (!bits)

        return -ENOMEM;

    for (i = 0; i < ddata->pdata->nbuttons; i++) {

        struct gpio_button_data *bdata = &ddata->data[i];

        if (bdata->button->type != type)

            continue;

        if (only_disabled && !bdata->disabled)

            continue;

        __set_bit(bdata->button->code, bits);

    }

    ret = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", n_events, bits);

    buf[ret++] = '\n';

    buf[ret] = '\0';

    kfree(bits);

    return ret;

}

/**

 * gpio_keys_attr_store_helper() - enable/disable buttons based on given bitmap

 * @ddata: pointer to drvdata

 * @buf: buffer from userspace that contains stringified bitmap

 * @type: button type (%EV_KEY, %EV_SW)

 *

 * This function parses stringified bitmap from @buf and disables/enables

 * GPIO buttons accordingly. Returns 0 on success and negative error

 * on failure.

 */

static ssize_t gpio_keys_attr_store_helper(struct gpio_keys_drvdata *ddata,

                       const char *buf, unsigned int type)

{

    int n_events = get_n_events_by_type(type);

    const unsigned long *bitmap = get_bm_events_by_type(ddata->input, type);

    unsigned long *bits;

    ssize_t error;

    int i;

    bits = kcalloc(BITS_TO_LONGS(n_events), sizeof(*bits), GFP_KERNEL);

    if (!bits)

        return -ENOMEM;

    error = bitmap_parselist(buf, bits, n_events);

    if (error)

        goto out;

    /* First validate */

    if (!bitmap_subset(bits, bitmap, n_events)) {

        error = -EINVAL;

        goto out;

    }

    for (i = 0; i < ddata->pdata->nbuttons; i++) {

        struct gpio_button_data *bdata = &ddata->data[i];

        if (bdata->button->type != type)

            continue;

        if (test_bit(bdata->button->code, bits) &&

            !bdata->button->can_disable) {

            error = -EINVAL;

            goto out;

        }

    }

    mutex_lock(&ddata->disable_lock);

    for (i = 0; i < ddata->pdata->nbuttons; i++) {

        struct gpio_button_data *bdata = &ddata->data[i];

        if (bdata->button->type != type)

            continue;

        if (test_bit(bdata->button->code, bits))

            gpio_keys_disable_button(bdata);

        else

            gpio_keys_enable_button(bdata);

    }

    mutex_unlock(&ddata->disable_lock);

out:

    kfree(bits);

    return error;

}

#define ATTR_SHOW_FN(name, type, only_disabled)             \

static ssize_t gpio_keys_show_##name(struct device *dev,        \

                     struct device_attribute *attr, \

                     char *buf)             \

{                                   \

    struct platform_device *pdev = to_platform_device(dev);     \

    struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);   \

                                    \

    return gpio_keys_attr_show_helper(ddata, buf,           \

                      type, only_disabled);     \

}

ATTR_SHOW_FN(keys, EV_KEY, false);

ATTR_SHOW_FN(switches, EV_SW, false);

ATTR_SHOW_FN(disabled_keys, EV_KEY, true);

ATTR_SHOW_FN(disabled_switches, EV_SW, true);

/*

 * ATTRIBUTES:

 *

 * /sys/devices/platform/gpio-keys/keys [ro]

 * /sys/devices/platform/gpio-keys/switches [ro]

 */

static DEVICE_ATTR(keys, S_IRUGO, gpio_keys_show_keys, NULL);

static DEVICE_ATTR(switches, S_IRUGO, gpio_keys_show_switches, NULL);

#define ATTR_STORE_FN(name, type)                   \

static ssize_t gpio_keys_store_##name(struct device *dev,       \

                      struct device_attribute *attr,    \

                      const char *buf,          \

                      size_t count)         \

{                                   \

    struct platform_device *pdev = to_platform_device(dev);     \

    struct gpio_keys_drvdata *ddata = platform_get_drvdata(pdev);   \

    ssize_t error;                          \

                                    \

    error = gpio_keys_attr_store_helper(ddata, buf, type);      \

    if (error)                          \

        return error;                       \

                                    \

    return count;                           \

}

ATTR_STORE_FN(disabled_keys, EV_KEY);

ATTR_STORE_FN(disabled_switches, EV_SW);

/*

 * ATTRIBUTES:

 *

 * /sys/devices/platform/gpio-keys/disabled_keys [rw]

 * /sys/devices/platform/gpio-keys/disables_switches [rw]

 */

static DEVICE_ATTR(disabled_keys, S_IWUSR | S_IRUGO,

           gpio_keys_show_disabled_keys,

           gpio_keys_store_disabled_keys);

static DEVICE_ATTR(disabled_switches, S_IWUSR | S_IRUGO,

           gpio_keys_show_disabled_switches,

           gpio_keys_store_disabled_switches);

static struct attribute *gpio_keys_attrs[] = {

    &dev_attr_keys.attr,

    &dev_attr_switches.attr,

    &dev_attr_disabled_keys.attr,

    &dev_attr_disabled_switches.attr,

    NULL,

};

static struct attribute_group gpio_keys_attr_group = {

    .attrs = gpio_keys_attrs,

};

static void gpio_keys_gpio_report_event(struct gpio_button_data *bdata)

{

    const struct gpio_keys_button *button = bdata->button;

    struct input_dev *input = bdata->input;

    unsigned int type = button->type ?: EV_KEY;

    int state;

    state = gpiod_get_value_cansleep(bdata->gpiod);

    if (state < 0) {

        dev_err(input->dev.parent,

            "failed to get gpio state: %d\n", state);

        return;

    }

    if (type == EV_ABS) {

        if (state)

            input_event(input, type, button->code, button->value);

    } else {

        input_event(input, type, button->code, state);

    }

    input_sync(input);

}

static void gpio_keys_gpio_work_func(struct work_struct *work)

{

    struct gpio_button_data *bdata =

        container_of(work, struct gpio_button_data, work.work);

    gpio_keys_gpio_report_event(bdata);

    if (bdata->button->wakeup)

        pm_relax(bdata->input->dev.parent);

}

static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id)

{

    struct gpio_button_data *bdata = dev_id;

    BUG_ON(irq != bdata->irq);

    if (bdata->button->wakeup)

        pm_stay_awake(bdata->input->dev.parent);

    mod_delayed_work(system_wq,

             &bdata->work,

             msecs_to_jiffies(bdata->software_debounce));

    return IRQ_HANDLED;

}

static void gpio_keys_irq_timer(unsigned long _data)

{

    struct gpio_button_data *bdata = (struct gpio_button_data *)_data;

    struct input_dev *input = bdata->input;

    unsigned long flags;

    spin_lock_irqsave(&bdata->lock, flags);

    if (bdata->key_pressed) {

        input_event(input, EV_KEY, bdata->button->code, 0);

        input_sync(input);

        bdata->key_pressed = false;

    }

    spin_unlock_irqrestore(&bdata->lock, flags);

}

static irqreturn_t gpio_keys_irq_isr(int irq, void *dev_id)

{

    struct gpio_button_data *bdata = dev_id;

    const struct gpio_keys_button *button = bdata->button;

    struct input_dev *input = bdata->input;

    unsigned long flags;

    BUG_ON(irq != bdata->irq);

    spin_lock_irqsave(&bdata->lock, flags);

    if (!bdata->key_pressed) {

        if (bdata->button->wakeup)

            pm_wakeup_event(bdata->input->dev.parent, 0);

        input_event(input, EV_KEY, button->code, 1);

        input_sync(input);

        if (!bdata->release_delay) {

            input_event(input, EV_KEY, button->code, 0);

            input_sync(input);

            goto out;

        }

        bdata->key_pressed = true;

    }

    if (bdata->release_delay)

        mod_timer(&bdata->release_timer,

            jiffies + msecs_to_jiffies(bdata->release_delay));

out:

    spin_unlock_irqrestore(&bdata->lock, flags);

    return IRQ_HANDLED;

}

static void gpio_keys_quiesce_key(void *data)

{

    struct gpio_button_data *bdata = data;

    if (bdata->gpiod)

        cancel_delayed_work_sync(&bdata->work);

    else

        del_timer_sync(&bdata->release_timer);

}

static int gpio_keys_setup_key(struct platform_device *pdev,

                struct input_dev *input,

                struct gpio_button_data *bdata,

                const struct gpio_keys_button *button)

{

    const char *desc = button->desc ? button->desc : "gpio_keys";

    struct device *dev = &pdev->dev;

    irq_handler_t isr;

    unsigned long irqflags;

    int irq;

    int error;

    bdata->input = input;

    bdata->button = button;

    spin_lock_init(&bdata->lock);

    /*

     * Legacy GPIO number, so request the GPIO here and

     * convert it to descriptor.

     */

    if (gpio_is_valid(button->gpio)) {

        unsigned flags = GPIOF_IN;

        if (button->active_low)

            flags |= GPIOF_ACTIVE_LOW;

        error = devm_gpio_request_one(&pdev->dev, button->gpio, flags,

                          desc);

        if (error < 0) {

            dev_err(dev, "Failed to request GPIO %d, error %d\n",

                button->gpio, error);

            return error;

        }

        bdata->gpiod = gpio_to_desc(button->gpio);

        if (!bdata->gpiod)

            return -EINVAL;

        if (button->debounce_interval) {

            error = gpiod_set_debounce(bdata->gpiod,

                    button->debounce_interval * 1000);

            /* use timer if gpiolib doesn't provide debounce */

            if (error < 0)

                bdata->software_debounce =

                        button->debounce_interval;

        }

        if (button->irq) {

            bdata->irq = button->irq;

        } else {

            irq = gpiod_to_irq(bdata->gpiod);

            if (irq < 0) {

                error = irq;

                dev_err(dev,

                    "Unable to get irq number for GPIO %d, error %d\n",

                    button->gpio, error);

                return error;

            }

            bdata->irq = irq;

        }

        INIT_DELAYED_WORK(&bdata->work, gpio_keys_gpio_work_func);

        isr = gpio_keys_gpio_isr;

        irqflags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING;

    } else {

        if (!button->irq) {

            dev_err(dev, "No IRQ specified\n");

            return -EINVAL;

        }

        bdata->irq = button->irq;

        if (button->type && button->type != EV_KEY) {

            dev_err(dev, "Only EV_KEY allowed for IRQ buttons.\n");

            return -EINVAL;

        }

        bdata->release_delay = button->debounce_interval;

        setup_timer(&bdata->release_timer,

                gpio_keys_irq_timer, (unsigned long)bdata);

        isr = gpio_keys_irq_isr;

        irqflags = 0;

    }

    input_set_capability(input, button->type ?: EV_KEY, button->code);

    /*

     * Install custom action to cancel release timer and

     * workqueue item.

     */

    error = devm_add_action(&pdev->dev, gpio_keys_quiesce_key, bdata);

    if (error) {

        dev_err(&pdev->dev,

            "failed to register quiesce action, error: %d\n",

            error);

        return error;

    }

    /*

     * If platform has specified that the button can be disabled,

     * we don't want it to share the interrupt line.

     */

    if (!button->can_disable)

        irqflags |= IRQF_SHARED;

    error = devm_request_any_context_irq(&pdev->dev, bdata->irq,

                         isr, irqflags, desc, bdata);

    if (error < 0) {

        dev_err(dev, "Unable to claim irq %d; error %d\n",

            bdata->irq, error);

        return error;

    }

    return 0;

}

static void gpio_keys_report_state(struct gpio_keys_drvdata *ddata)

{

    struct input_dev *input = ddata->input;

    int i;

    for (i = 0; i < ddata->pdata->nbuttons; i++) {

        struct gpio_button_data *bdata = &ddata->data[i];

        if (bdata->gpiod)

            gpio_keys_gpio_report_event(bdata);

    }

    input_sync(input);

}

static int gpio_keys_open(struct input_dev *input)

{

    struct gpio_keys_drvdata *ddata = input_get_drvdata(input);

    const struct gpio_keys_platform_data *pdata = ddata->pdata;

    int error;

    if (pdata->enable) {

        error = pdata->enable(input->dev.parent);

        if (error)

            return error;

    }

    /* Report current state of buttons that are connected to GPIOs */

    gpio_keys_report_state(ddata);

    return 0;

}

static void gpio_keys_close(struct input_dev *input)

{

    struct gpio_keys_drvdata *ddata = input_get_drvdata(input);

    const struct gpio_keys_platform_data *pdata = ddata->pdata;

    if (pdata->disable)

        pdata->disable(input->dev.parent);

}

/*

 * Handlers for alternative sources of platform_data

 */

#define CONFIG_OF

#ifdef CONFIG_OF

/*

 * Translate OpenFirmware node properties into platform_data

 */

static struct gpio_keys_platform_data *

gpio_keys_get_devtree_pdata(struct device *dev)

{

    struct device_node *node, *pp;

    struct gpio_keys_platform_data *pdata;

    struct gpio_keys_button *button;

    int error;

    int nbuttons;

    int i;

    node = dev->of_node;

    if (!node)

        return ERR_PTR(-ENODEV);

    nbuttons = of_get_available_child_count(node);

    if (nbuttons == 0)

        return ERR_PTR(-ENODEV);

    pdata = devm_kzalloc(dev,

                 sizeof(*pdata) + nbuttons * sizeof(*button),

                 GFP_KERNEL);

    if (!pdata)

        return ERR_PTR(-ENOMEM);

    pdata->buttons = (struct gpio_keys_button *)(pdata + 1);

    pdata->nbuttons = nbuttons;

    pdata->rep = !!of_get_property(node, "autorepeat", NULL);

    of_property_read_string(node, "label", &pdata->name);

    i = 0;

    for_each_available_child_of_node(node, pp) {

        struct gpio_config flags;

        button = &pdata->buttons[i++];

        button->gpio = of_get_gpio_flags(pp, 0,

                (enum of_gpio_flags *)&flags);

        if (button->gpio < 0) {

            error = button->gpio;

            if (error != -ENOENT) {

                if (error != -EPROBE_DEFER)

                    dev_err(dev,

                        "Failed to get gpio flags, error: %d\n",

                        error);

                return ERR_PTR(error);

            }

        } else {

            button->active_low = flags.data & OF_GPIO_ACTIVE_LOW;

        }

        button->irq = irq_of_parse_and_map(pp, 0);

        if (!gpio_is_valid(button->gpio) && !button->irq) {

            dev_err(dev, "Found button without gpios or irqs\n");

            return ERR_PTR(-EINVAL);

        }

        if (of_property_read_u32(pp, "linux,code", &button->code)) {

            dev_err(dev, "Button without keycode: 0x%x\n",

                button->gpio);

            return ERR_PTR(-EINVAL);

        }

        button->desc = of_get_property(pp, "label", NULL);

        if (of_property_read_u32(pp, "linux,input-type", &button->type))

            button->type = EV_KEY;

        button->wakeup = of_property_read_bool(pp, "wakeup-source") ||

                 /* legacy name */

                 of_property_read_bool(pp, "gpio-key,wakeup");

        button->can_disable = !!of_get_property(pp, "linux,can-disable", NULL);

        if (of_property_read_u32(pp, "debounce-interval",

                     &button->debounce_interval))

            button->debounce_interval = 5;

    }

    if (pdata->nbuttons == 0)

        return ERR_PTR(-EINVAL);

    return pdata;

}

static const struct of_device_id gpio_keys_of_match[] = {

    { .compatible = "gpio-keys", },

    { },

};

MODULE_DEVICE_TABLE(of, gpio_keys_of_match);

#else

static inline struct gpio_keys_platform_data *

gpio_keys_get_devtree_pdata(struct device *dev)

{

    return ERR_PTR(-ENODEV);

}

#endif

static int gpio_keys_probe(struct platform_device *pdev)

{

    struct device *dev = &pdev->dev;

    const struct gpio_keys_platform_data *pdata = dev_get_platdata(dev);

    struct gpio_keys_drvdata *ddata;

    struct input_dev *input;

    size_t size;

    int i, error;

    int wakeup = 0;

    if (!pdata) {

        pdata = gpio_keys_get_devtree_pdata(dev);

        if (IS_ERR(pdata))

            return PTR_ERR(pdata);

    }

    size = sizeof(struct gpio_keys_drvdata) +

            pdata->nbuttons * sizeof(struct gpio_button_data);

    ddata = devm_kzalloc(dev, size, GFP_KERNEL);

    if (!ddata) {

        dev_err(dev, "failed to allocate state\n");

        return -ENOMEM;

    }

    input = devm_input_allocate_device(dev);

    if (!input) {

        dev_err(dev, "failed to allocate input device\n");

        return -ENOMEM;

    }

    ddata->pdata = pdata;

    ddata->input = input;

    mutex_init(&ddata->disable_lock);

    platform_set_drvdata(pdev, ddata);

    input_set_drvdata(input, ddata);

    input->name = pdata->name ? : pdev->name;

    input->phys = "gpio-keys/input0";

    input->dev.parent = &pdev->dev;

    input->open = gpio_keys_open;

    input->close = gpio_keys_close;

    input->id.bustype = BUS_HOST;

    input->id.vendor = 0x0001;

    input->id.product = 0x0001;

    input->id.version = 0x0100;

    /* Enable auto repeat feature of Linux input subsystem */

    if (pdata->rep)

        __set_bit(EV_REP, input->evbit);

    for (i = 0; i < pdata->nbuttons; i++) {

        const struct gpio_keys_button *button = &pdata->buttons[i];

        struct gpio_button_data *bdata = &ddata->data[i];

        error = gpio_keys_setup_key(pdev, input, bdata, button);

        if (error)

            return error;

        if (button->wakeup)

            wakeup = 1;

    }

    error = sysfs_create_group(&pdev->dev.kobj, &gpio_keys_attr_group);

    if (error) {

        dev_err(dev, "Unable to export keys/switches, error: %d\n",

            error);

        return error;

    }

    error = input_register_device(input);

    if (error) {

        dev_err(dev, "Unable to register input device, error: %d\n",

            error);

        goto err_remove_group;

    }

    device_init_wakeup(&pdev->dev, wakeup);

    return 0;

err_remove_group:

    sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);

    return error;

}

static int gpio_keys_remove(struct platform_device *pdev)

{

    sysfs_remove_group(&pdev->dev.kobj, &gpio_keys_attr_group);

    device_init_wakeup(&pdev->dev, 0);

    return 0;

}

#ifdef CONFIG_PM_SLEEP

static int gpio_keys_suspend(struct device *dev)

{

    struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);

    struct input_dev *input = ddata->input;

    int i;

    if (device_may_wakeup(dev)) {

        for (i = 0; i < ddata->pdata->nbuttons; i++) {

            struct gpio_button_data *bdata = &ddata->data[i];

            if (bdata->button->wakeup)

                enable_irq_wake(bdata->irq);

        }

    } else {

        mutex_lock(&input->mutex);

        if (input->users)

            gpio_keys_close(input);

        mutex_unlock(&input->mutex);

    }

    return 0;

}

static int gpio_keys_resume(struct device *dev)

{

    struct gpio_keys_drvdata *ddata = dev_get_drvdata(dev);

    struct input_dev *input = ddata->input;

    int error = 0;

    int i;

    if (device_may_wakeup(dev)) {

        for (i = 0; i < ddata->pdata->nbuttons; i++) {

            struct gpio_button_data *bdata = &ddata->data[i];

            if (bdata->button->wakeup)

                disable_irq_wake(bdata->irq);

        }

    } else {

        mutex_lock(&input->mutex);

        if (input->users)

            error = gpio_keys_open(input);

        mutex_unlock(&input->mutex);

    }

    if (error)

        return error;

    gpio_keys_report_state(ddata);

    return 0;

}

#endif

static SIMPLE_DEV_PM_OPS(gpio_keys_pm_ops, gpio_keys_suspend, gpio_keys_resume);

static struct platform_driver gpio_keys_device_driver = {

    .probe      = gpio_keys_probe,

    .remove     = gpio_keys_remove,

    .driver     = {

        .name   = "gpio-keys",

        .pm = &gpio_keys_pm_ops,

        .of_match_table = of_match_ptr(gpio_keys_of_match),

    }

};

static int __init gpio_keys_init(void)

{

    return platform_driver_register(&gpio_keys_device_driver);

}

static void __exit gpio_keys_exit(void)

{

    platform_driver_unregister(&gpio_keys_device_driver);

}

late_initcall(gpio_keys_init);

module_exit(gpio_keys_exit);

MODULE_LICENSE("GPL");

MODULE_AUTHOR("Phil Blundell <pb@handhelds.org>");

MODULE_DESCRIPTION("Keyboard driver for GPIOs");

MODULE_ALIAS("platform:gpio-keys");

dts控制

        gpio-keys {
            compatible = "gpio-keys";
            label = "gpio-keys";

            volume_down {
                label = "Volume Down";
                gpios = <&pio PH 4 1 0xffffffff 0xffffffff 0>;
                linux,code = <KEY_VOLUMEDOWN>;
            };
            volume_up {
                label = "Volume Up";
                gpios = <&pio PH 5 1 0xffffffff 0xffffffff 0>;
                linux,code = <KEY_VOLUMEUP>;
            };
        };

1、安装PC上的升级工具Livesuite.exe。      2、打开Livesuit      找到升级工具文件双击打开,如下图所示:      3、选择固件      点击上图的“否”关闭用户向导升级,并点击“选择固件”按钮选择后缀名为.img文件,如下图:      4、关闭电源      确保将I130关机(开机状态下,长按电源键8秒钟以上可强制断电关机)      5、按下组合键开始升级      按住I130平板的任意键(除了电源键,推荐音量+)不放开,再通过USB数据线连上电脑,然后快速连续点击电源键5-6次,记住此时千万不能松开开始按住的按键,直到电脑上出现下图界面时,松开所有键开始升级。      (注:如果此时弹出安装驱动程序的对话框,请把路径指向Livesuit安装目录下的UsbDriver文件夹,并按下一步提示完成驱动程序的安装)。      6、选择强制格式化升级      Livesuit提示“是否强制格式化”,点击“是”,则原先安装的APK全部被删除,点击否则原装APK不会删除。      推荐强制格式化,进行彻底更新升级!否则可能更新不彻底而变砖!      7、升级开始      弹出“确定要强制格式化”对话框,选择“是”,升级开始,如下图:      8、升级完成      固件更新过程大约持续3分半钟左右,请耐心等待,直到提示“升级成功”。   
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值