Ch1.6: IN-place-ly rotate a pic(NxN matrix) by 90 digree in Verilog(CPP)

Matlab实现使用遗传算法的混合能源系统优化.rar 立即下载

这个有点像DSP FPGA Chang Choo的题目,一般是放大插值,DFT,IIR之类的Verilog题目。

题目在这:Given an image represented by an NxN matrix, where each pixel in the image is 4 bytes, write a method to rotate the image by 90 degrees. Can you do this in place?

//https://github.com/monish001/CPP-Programs/blob/master/CTCI/1.6MatrixRotateBy90.cpp
//MatrixRotate90.cpp

#include 

using namespace std;

void swap(char &a, char &b){
    char t = a;
    a = b;
    b = t;
}

void rotate(char** a, int n){
    for (int i=0; i

注意,这里的循环基和index需要留心注意。

关于index的选择,可以参考这个草图:


基于斜坡补偿的Buck电路峰值电流+电压电流双闭环控制【附说明文档】(Simulink仿真实现)优快云首页发布文章优快云同步助手LLC谐振变换器开环+闭环软启动仿真设计(Simulink 内容概要:本文围绕三电平VIENNA整流器的双闭环控制与中点电位平衡问题展开仿真研究,提出了一种基于上下电容电压差值补偿的中点电位平衡策略。该策略在传统电压电流双闭环PI控制的基础上,引入电容电压差值作为反馈信号,通过SVPWM调制中冗余小矢量的时间分配实现中点电荷的定向调节,从而在不改变主控制结构的前提下有效抑制中点电位偏差。仿真结果表明,该方法不仅确保直流母线电压稳定跟踪800V给定值,还能显著提升上下电容电压的均衡度,同时保持输入电流低谐波水平,验证了控制策略的可行性和有效性。; 适合人群:电力电子、电气自动化及相关专业的研究生、科研人员及工程技术人员,具备一定的MATLAB/Simulink仿真基础和电力电子拓扑知识背景者更佳。; 使用场景及目标:①掌握三电平VIENNA整流器的工作原理与中点电位波动的成因;②理解电压电流双闭环PI控制的设计要点与参数整定原则;③学习基于差值补偿的中点电位平衡控制策略及其与SVPWM的协同机制;④应用于充电桩、航空电源、通信电源等中大功率单向整流场合的控制系统设计与优化。; 阅读建议:建议结合文中提供的仿真模型与参数设置进行动手实践,重点关注中点电位平衡投入前后电容电压波形的变化,对比分析不同工况下的系统动态响应,深入理解控制策略的作用机理。同时可进一步探索在电网不平衡、轻载等复杂工况下的控制性能,以拓展应用场景。 立即下载

相关推荐

自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标(Matlab代码实现)

内容概要:本文针对“自适应多机器人编队规划,以包围和跟踪具有运动和可见性约束的目标”开展研究,提出一种基于Matlab的仿真方法,实现多机器人在动态环境中对移动目标的协同包围与持续跟踪。该方法综合考虑了机器人的运动学约束与传感器的视线(visibility)限制,设计了分布式控制策略与自适应编队算法,能够在复杂环境下有效维持编队结构的稳定性和任务执行的鲁棒性。研究详细阐述了系统建模过程、控制律设计原理、编队形成与保持机制,并通过Matlab代码实现了完整的仿真验证,展示了算法在不同动态场景下的适应能力与性能优势; 适合人群:具备机器人学、自动控制理论、多智能体系统等相关基础知识,熟悉Matlab编程语言,从事智能系统、协同控制、路径规划与自主导航等方向的研究生、科研人员及工程技术人员; 使用场景及目标:①应用于安防监控、环境探测、灾害救援等场景中的多机器人目标围捕与跟踪任务;②为多智能体协同控制、分布式编队保持、避障与可见性维护等关键技术提供可复现的算法框架与仿真平台;③辅助高校与科研机构在相关领域的教学演示与科研创新,深化对自适应控制与分布式协同机制的理解; 阅读建议:建议读者结合提供的Matlab代码逐模块分析其实现逻辑,重点关注控制律设计、约束处理与自适应机制部分,可通过调整机器人数量、目标轨迹、传感器参数等进行扩展性实验,以深入掌握多机器人协同系统的动态行为与优化方法。

cc150做题计划

计划:12.29.2013 - 1.29.2013 做完第一遍题目,然后2月做leetcode。 2月底面试前完成200题C++。 这里记录一下ctci学习的参考资料。 1. hawstein的blog 2. https://github.com/ChengTian/CtCI 3. absolute C++ 5th 4. Primer C++ 5. learncpp:http

纯黑老白的专栏 2909

patch_1.23.0.2584_game_No6.android.pak

patch_1.23.0.2584_game_No6.android.pak

ch4.6: find the LCA of 2 nodes in a binary tree with 3 different methods

In this problem, it is important to fully understand the definition of least common ancestor of 2 nodes: it means: (from leetcode blog: 点击打开链接) _______3______ / \

纯黑老白的专栏 1330

状态估计【卡尔曼滤波kalman】UKF、EKF、粒子滤波PF学习与研究(Matlab代码实现)

内容概要:本文系统地研究了无迹卡尔曼滤波(UKF)、扩展卡尔曼滤波(EKF)和粒子滤波(PF)在非线性系统状态估计中的理论基础与实际应用,并结合Matlab代码实现进行了深入剖析。内容涵盖三种滤波算法的核心原理、数学推导及其在轨迹估计等工程问题中的具体实施方法。通过详尽的Matlab编程实例,展示了如何利用这些先进滤波技术解决如目标跟踪、传感器融合等复杂问题,并特别探讨了BP神经网络与EKF结合的优化训练策略以及粒子滤波在提高状态跟踪精度方面的潜力。该资料为希望掌握现代状态估计算法的研究人员和技术爱好者提供了一套完整的理论与实践指南; 适合人群:具备一定编程基础,尤其是熟练使用Matlab工具,且对控制理论、信号处理或相关工程技术领域有初步了解的研发人员和高校学生; 使用场景及目标:① 深入理解UKF、EKF和PF的基本概念及其在非线性动态系统中进行状态变量估计的应用;② 通过Matlab代码实践加深对各滤波器工作机制的理解,能够独立开发相应的算法以应对诸如轨迹预测、多源信息融合等实际挑战;③ 探索将BP神经网络与EKF相结合的新途径,以期提升模型的学习效率和预测准确性; 阅读建议:此资源不仅提供了坚实的理论支撑,还包括丰富的代码示例,建议读者按照文档结构循序渐进地学习,同时动手实现每一个案例,以便更深刻地把握各种滤波技术的关键细节。对于致力于深入研究状态估计领域的专业人士而言,这是一份极具价值的学习材料。

CLCD土地覆盖数据在ArcGIS中的实战应用:从导入到空间分析的完整指南

本文详细介绍了CLCD土地覆盖数据在ArcGIS中的实战应用,从数据导入到空间分析的完整流程。涵盖坐标系转换、数据质量检查、土地利用变化检测等核心技术,并分享城市扩张模拟和跨数据集融合等高级应用技巧,帮助研究者高效利用这一权威数据集进行环境监测和城市规划。

weixin_29292535的博客 602

Ch2-2: return the nth to the last node data of a singly linked list

In this problem, I need to find the nth to the last node data of a singly linked list.  In order to do so, one good way is to use recursion, since it is automatically put recursion part into stack an

纯黑老白的专栏 1290

【毕业设计参考】基于yolov8+pyqt5自适应界面设计的锂电池表面缺陷检测系统

基于YOLOv8+PyQt5的锂电池表面缺陷检测系统结合了先进的目标检测技术与友好的用户界面设计,为锂电池质量检测提供了一种高效、准确的解决方案。未来,随着深度学习技术的不断发展,我们可以进一步优化模型,提高检测精度和速度,同时拓展系统功能,如实现实时视频流检测、与生产系统的深度集成等,为锂电池产业的发展注入新的活力。希望本文对大家在相关领域的研究和实践有所帮助,欢迎大家在评论区交流讨论。

1183

1/22/2014: 纪念第一个C++ programmer电面--F家

经过20天的CC刷题(其实是学习),才刚刚做到第四章。看看其他非ACM牛人,都是leetcode,CC,EPI滚瓜烂熟才去面。而且onsite确实是靠实力,要有做过大project之后才能真正融会贯通C++精神。 Anyway,谢谢郭志给的refer,不然连电面的机会都没有。 开头是C++基础题: 1. Fib的2种写法:recursive和DP 2. Struct和Class的区别;在C

纯黑老白的专栏 1274

黑马Java第二阶段:JavaWeb(笔记)

黑马Java第二阶段:JavaWeb(笔记)

chen的博客 5671

FDTD脚本教程——结构的创建

文章目录结构的搭建创建长方体创建柱体多边形柱体(椭)圆柱体圆环柱自定义形状创建surface波导球棱锥 在lumerical中,可以使用脚本进行操作,可在右侧脚本编辑器运行,或者直接在下方shell输入。 结构的搭建 创建长方体 um = 1e-6; nm = 1e-7; addrect; set("name","myRect"); set("material","SiO2 (Glass) - Palik"); set("render type","wireframe"); # 默认是细节渲染,也就是det

战斗果冻的训练中心 2万+

Ch1-7: clear the row i and column j iff a[i][j]==0

in this problem, both monish001 and hawstein use O(n^2) solution which first tranverse the char** a to find the a[i][j]==0 and mark that row/col to be: TRUE. Then the send loop make the TURE row/col

纯黑老白的专栏 1207

实验5 振幅调制(集成乘法器幅度调制电路)

目录5-1 振荡调制的基本工作原理一.振幅调制和调幅波1.普通调幅波(AM)(1)调幅波的表达式、波形(2)调幅波的频谱2.抑制载波双边带调幅(DSB)3.抑制载波单边带调幅(SSB)二.普通调幅波的产生电路三.抑制载波调幅的产生电路5-2 振幅调制实验电路 5-1 振荡调制的基本工作原理 根据电磁波理论知道,只有频率较高的振荡才能被天线有效地辐射。但是人的讲话声音变换为相应电信号的频率较低,不适于直接从天线上辐射。因此,为了传递信息,就必须将要传递的信息“记载”到高频振荡上去。这一“记载”过程称为调

胡毛毛的博客 3万+

复习一下dfs和bfs 用java

dfs 和 bfs都是用来找从source 到 target的path的算法。 dfs用的是recursion,bfs则用queue

纯黑老白的专栏 1191

基于Unity引擎利用OpenCV和MediaPipe的面部表情和人体运动捕捉系统

增加了模型的绑定,利用Mediapipe这个强大的库可以实现识别面部表情的捕捉和人体结构运动的捕捉,基于以上的特性加入到Unity的人物模型中,实现实时的面部表情和人体运行的捕捉

BIgbossyii的博客 1万+

锐明技术Crocus系统 DeviceState.do SQL注入漏洞复现

锐明技术Crocus系统 DeviceState.do 接口存在SQL注入漏洞,经过身份验证的远程攻击者除了可以利用SQL注入漏洞获取数据库中的信息(例如,管理员后台密码、站点的用户个人信息)之外,甚至在高权限的情况可向服务器中写入木马,进一步获取服务器系统权限。

0xSec 454

Ch3-1: use a single array to implement three stacks.

Here it explains why Hawstein use this in his constructor, because he use size a parameter in his constructor while "size" is also a member variable(it's private), so he use this->size = size, explici

纯黑老白的专栏 1097

Labview如何0基础自学快速入门?(纯干货帖)

讲解了如何学习Labview,Labview如何0基础入门,自学Labview的方法。什么都不会如何学好Labview的分享,欢迎关注文章~文章提供《Labview宝典》pdf下载,和《Labview虚拟仪器数据采集与通信控制》pdf下载

关注我,更多技术问题欢迎私聊~ 2万+

ch4.7: given 2 huge Binary tree t1, t2(>1millon nodes), decide if one tree is subtree of another one

// Ch4.7: You have two very large binary trees: T1, with millions of nodes, and T2, // with hundreds of nodes. Create an algorithm to decide if T2 is a subtree of T1 #include #include #includ

纯黑老白的专栏 1030

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

VC中sqlite的使用

在VC中对sqlite的使用,实现数据库大批数据的快速插入,读取数据库中的数据在ListCtrl中显示

复习recursion

1. 如果这样 private void lop(int x, int size, double[] jerry){ if(x==size-1){ jerry[x] = -1; return; } if(jerry[x+1]==0){ jerry[x+1] = jerry[x]- 1; //if so, lop(x+1, size, jerry); }

纯黑老白的专栏 1009

蓝牙模块HM-10手册

蓝牙模块HM-10手册,该手册对蓝牙模块HM-10进行了详细的介绍和使用方法以及一些AT指令。

Ch2-5: find the beginning of loop in a circular linked list---two solutions

Given a circular linked list, implement an algorithm which returns node at the beginning of the loop. DEFINITION Circular linked list: A (corrupt) linked list in which a node’s next pointer poin

纯黑老白的专栏 986

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

Ch3-2: implement min() for a stack with O(1)

Here will show the thinking flow from bad to good. idea 1: const int MAX_INT = ~(1<<31);//2147483647 struct node{ int val, min; }; class StackWithMin{ public: StackWithMin(int size){

纯黑老白的专栏 956

Ch8.8: 8 queen problem

In order to solve this problem efficiently, need to use backtracking method instead of iterations. Aka: Backtracking is a general algorithm for finding all (or some) solutions to some computational p

纯黑老白的专栏 949

Ch3-3: popat(int idx) of setofstack

Continue to use class to design solution, also, start to use STL, such as container (vector, stack, set, ...). save time and to be more professional. The design without popat method is similar to the

纯黑老白的专栏 948

Ch4-2: find if 2 given vertices are connected in a directed map,BFS + JUST fix the DFS recursion

In this problem, there are 2 ways: BFS or DFS. Hawstein used BFS: #include #include #include #include using namespace std; const int maxn = 100; bool g[maxn][maxn], visited[maxn]; int n;

纯黑老白的专栏 938
上一篇: Ch1-5: Write a method to replace all spaces in a string with ‘%20’.
下一篇: Ch1-7: clear the row i and column j iff a[i][j]==0
纯黑老白
博客等级 码龄18年 30粉丝 62原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值