嵌入式系统学习笔记之五-- uboot常用命令 概述

首先，先看看uboot都有那些命令：（这里我使用的是OKMX6ULL-S2开发板的linux版），不同的开发板的系统中的命令可能会稍有差异，对于我们学习影响不大。

=> help
?       - alias for 'help'
base    - print or set address offset
bdinfo  - print Board Info structure
bmode   - sd1|sd2|qspi1|normal|usb|sata|ecspi1:0|ecspi1:1|ecspi1:2|ecspi1:3|esdhc1|esdhc2|esdhc3|esdhc4 [noreset]
bmp     - manipulate BMP image data
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootelf - Boot from an ELF image in memory
bootm   - boot application image from memory
bootp   - boot image via network using BOOTP/TFTP protocol
bootvx  - Boot vxWorks from an ELF image
bootz   - boot Linux zImage image from memory
clocks  - display clocks
clrlogo - fill the boot logo area with black
cmp     - memory compare
coninfo - print con