m0_50749129的博客

【实验拓扑】配置路由VRRPR1:[R1]interface GigabitEthernet 0/0/0[R1-GigabitEthernet0/0/0]vrrp vrid 1 virtual-ip 192.168.1.254[R1-GigabitEthernet0/0/0]vrrp vrid 1 priority 120[R1-GigabitEthernet0/0/0]vrrp vrid 1 preempt-mode timer delay 0R2：[R2]interface Gigab

【实验拓扑】【实验需求】使用MSTP实现VLAN10 和VLAN20的互访，并且VLAN10的流量通过路径S3到S1到R1VLAN20的流量通过路径S3到S2到R1。【实验过程】1.配置IP地址。[r1]int g0/0/0[r1-GigabitEthernet0/0/0]ip add 192.168.10.254 24[r1-GigabitEthernet0/0/0]undo sh[r1-GigabitEthernet0/0/0]int g0/0/1[r1-GigabitEther

实验拓扑：实验要求:配置ip配置ospf配置路由汇总配置路由重分发配置ipR1:interface GigabitEthernet 0/0/1ip add 192.168.1.1 255.255.255.0undo shinterface GigabitEthernet 0/0/0ip add 192.168.3.2 255.255.255.0undo shint loopback0ip add 1.1.1.1 255.255.255.255R2:interface Gi