/content
Mounted at /content/drive
env: PYTHONDONTWRITEBYTECODE=1
env: TF_CPP_MIN_LOG_LEVEL=1
41 packages can be upgraded. Run 'apt list --upgradable' to see them.
W: Skipping acquire of configured file 'main/source/Sources' as repository 'https://r2u.stat.illinois.edu/ubuntu jammy InRelease' does not seem to provide it (sources.list entry misspelt?)
--2025-07-10 10:19:00-- https://github.com/camenduru/gperftools/releases/download/v1.0/libtcmalloc_minimal.so.4
Resolving github.com (github.com)... 140.82.113.4
Connecting to github.com (github.com)|140.82.113.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://objects.githubusercontent.com/github-production-release-asset-2e65be/669786276/620e2e64-be9f-4599-904f-18ee3811e159?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20250710%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20250710T101901Z&X-Amz-Expires=1800&X-Amz-Signature=b5c26ca3d158bb5b88d2b09125b067e065003244102eeb42a1d86a5fc1b6c62e&X-Amz-SignedHeaders=host&response-content-disposition=attachment%3B%20filename%3Dlibtcmalloc_minimal.so.4&response-content-type=application%2Foctet-stream [following]
--2025-07-10 10:19:01-- https://objects.githubusercontent.com/github-production-release-asset-2e65be/669786276/620e2e64-be9f-4599-904f-18ee3811e159?X-Amz-Algorithm=AWS4-HMAC-SHA256&X-Amz-Credential=releaseassetproduction%2F20250710%2Fus-east-1%2Fs3%2Faws4_request&X-Amz-Date=20250710T101901Z&X-Amz-Expires=1800&X-Amz-Signature=b5c26ca3d158bb5b88d2b09125b067e065003244102eeb42a1d86a5fc1b6c62e&X-Amz-SignedHeaders=host&response-content-disposition=attachment%3B%20filename%3Dlibtcmalloc_minimal.so.4&response-content-type=application%2Foctet-stream
Resolving objects.githubusercontent.com (objects.githubusercontent.com)... 185.199.108.133, 185.199.109.133, 185.199.110.133, ...
Connecting to objects.githubusercontent.com (objects.githubusercontent.com)|185.199.108.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 373960 (365K) [application/octet-stream]
Saving to: ‘/content/libtcmalloc_minimal.so.4’
/content/libtcmallo 100%[===================>] 365.20K --.-KB/s in 0.02s
2025-07-10 10:19:01 (15.2 MB/s) - ‘/content/libtcmalloc_minimal.so.4’ saved [373960/373960]
env: LD_PRELOAD=/content/libtcmalloc_minimal.so.4
libcairo2-dev is already the newest version (1.16.0-5ubuntu2).
python3-dev is already the newest version (3.10.6-1~22.04.1).
python3-dev set to manually installed.
The following packages were automatically installed and are no longer required:
libbz2-dev libpkgconf3 libreadline-dev
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
pkgconf r-base-dev
The following NEW packages will be installed:
aria2 libaria2-0 libc-ares2 pkg-config
0 upgraded, 4 newly installed, 2 to remove and 41 not upgraded.
Need to get 1,561 kB of archives.
After this operation, 5,430 kB of additional disk space will be used.
(Reading database ... 126281 files and directories currently installed.)
Removing r-base-dev (4.5.1-1.2204.0) ...
dpkg: pkgconf: dependency problems, but removing anyway as you requested:
libsndfile1-dev:amd64 depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libopencv-dev depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libmkl-dev:amd64 depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libjack-dev depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libgphoto2-dev:amd64 depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libglib2.0-dev:amd64 depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
libfontconfig-dev:amd64 depends on pkg-config; however:
Package pkg-config is not installed.
Package pkgconf which provides pkg-config is to be removed.
Removing pkgconf (1.8.0-1) ...
Removing 'diversion of /usr/bin/pkg-config to /usr/bin/pkg-config.real by pkgconf'
Removing 'diversion of /usr/share/aclocal/pkg.m4 to /usr/share/aclocal/pkg.real.m4 by pkgconf'
Removing 'diversion of /usr/share/man/man1/pkg-config.1.gz to /usr/share/man/man1/pkg-config.real.1.gz by pkgconf'
Removing 'diversion of /usr/share/pkg-config-crosswrapper to /usr/share/pkg-config-crosswrapper.real by pkgconf'
Selecting previously unselected package pkg-config.
(Reading database ... 126257 files and directories currently installed.)
Preparing to unpack .../pkg-config_0.29.2-1ubuntu3_amd64.deb ...
Unpacking pkg-config (0.29.2-1ubuntu3) ...
Selecting previously unselected package libc-ares2:amd64.
Preparing to unpack .../libc-ares2_1.18.1-1ubuntu0.22.04.3_amd64.deb ...
Unpacking libc-ares2:amd64 (1.18.1-1ubuntu0.22.04.3) ...
Selecting previously unselected package libaria2-0:amd64.
Preparing to unpack .../libaria2-0_1.36.0-1_amd64.deb ...
Unpacking libaria2-0:amd64 (1.36.0-1) ...
Selecting previously unselected package aria2.
Preparing to unpack .../aria2_1.36.0-1_amd64.deb ...
Unpacking aria2 (1.36.0-1) ...
Setting up libc-ares2:amd64 (1.18.1-1ubuntu0.22.04.3) ...
Setting up pkg-config (0.29.2-1ubuntu3) ...
Setting up libaria2-0:amd64 (1.36.0-1) ...
Setting up aria2 (1.36.0-1) ...
Processing triggers for man-db (2.10.2-1) ...
Processing triggers for libc-bin (2.35-0ubuntu3.8) ...
/sbin/ldconfig.real: /usr/local/lib/libtcm_debug.so.1 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbbbind_2_0.so.3 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libur_adapter_opencl.so.0 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbbmalloc.so.2 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbb.so.12 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbbbind.so.3 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libur_loader.so.0 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbbbind_2_5.so.3 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libhwloc.so.15 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libur_adapter_level_zero.so.0 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libumf.so.0 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtbbmalloc_proxy.so.2 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libur_adapter_level_zero_v2.so.0 is not a symbolic link
/sbin/ldconfig.real: /usr/local/lib/libtcm.so.1 is not a symbolic link
The following packages were automatically installed and are no longer required:
libbz2-dev libpkgconf3 libreadline-dev
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
unionfs-fuse
0 upgraded, 1 newly installed, 0 to remove and 41 not upgraded.
Need to get 48.7 kB of archives.
After this operation, 146 kB of additional disk space will be used.
Selecting previously unselected package unionfs-fuse.
(Reading database ... 126346 files and directories currently installed.)
Preparing to unpack .../unionfs-fuse_1.0-1ubuntu2_amd64.deb ...
Unpacking unionfs-fuse (1.0-1ubuntu2) ...
Setting up unionfs-fuse (1.0-1ubuntu2) ...
Processing triggers for man-db (2.10.2-1) ...
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.3/2.3 GB 444.7 kB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 6.1/6.1 MB 89.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.4/4.4 MB 76.9 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 2.0/2.0 MB 16.6 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 4.6/4.6 MB 78.7 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 63.3/63.3 MB 11.3 MB/s eta 0:00:00
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 96.4/96.4 kB 3.0 MB/s eta 0:00:00
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
torchtune 0.6.1 requires torchdata==0.11.0, but you have torchdata 0.6.0 which is incompatible.
ERROR: Could not find a version that satisfies the requirement xformers==0.0.19 (from versions: 0.0.1, 0.0.2, 0.0.3, 0.0.4, 0.0.5, 0.0.6, 0.0.7, 0.0.8, 0.0.9, 0.0.10, 0.0.11, 0.0.12, 0.0.13, 0.0.16rc424, 0.0.16rc425, 0.0.16, 0.0.20, 0.0.21, 0.0.22, 0.0.22.post7, 0.0.23, 0.0.23.post1, 0.0.24, 0.0.25, 0.0.25.post1, 0.0.26.post1, 0.0.27, 0.0.27.post1, 0.0.27.post2, 0.0.28, 0.0.28.post1, 0.0.28.post2, 0.0.28.post3, 0.0.29, 0.0.29.post1, 0.0.29.post2, 0.0.29.post3, 0.0.30, 0.0.31, 0.0.31.post1, 0.0.32.dev1062, 0.0.32.dev1064)
ERROR: No matching distribution found for xformers==0.0.19
Failed to open /content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/extensions/sd-webui-additional-networks/models/lora/: No such file or directory. Aborting!
/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui
Updating files: 100% (203/203), done.
HEAD is now at 22bcc7be attempted fix for infinite loading for settings that some people experience
Updating files: 100% (135/135), done.
HEAD is now at cf1d67a Update modelcard.md
HEAD is now at c202932 GRADIO_TUNNEL online
Already up to date.
Download Results:
gid |stat|avg speed |path/URI
======+====+===========+=======================================================
20d2be|OK | 0B/s|/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/models/CLIP/ViT-L-14.pt
Status Legend:
(OK):download completed.
Python 3.11.13 (main, Jun 4 2025, 08:57:29) [GCC 11.4.0]
Commit hash: 22bcc7be428c94e9408f589966c2040187245d81
Installing gfpgan
Installing clip
Installing open_clip
Installing xformers
Traceback (most recent call last):
File "/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/launch.py", line 355, in <module>
prepare_environment()
File "/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/launch.py", line 281, in prepare_environment
run_pip(f"install {xformers_package}", "xformers")
File "/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/launch.py", line 129, in run_pip
return run(f'"{python}" -m pip {args} --prefer-binary{index_url_line}', desc=f"Installing {desc}", errdesc=f"Couldn't install {desc}")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/content/drive/MyDrive/stable-diffusion-webui-colab/stable-diffusion-webui/launch.py", line 97, in run
raise RuntimeError(message)
RuntimeError: Couldn't install xformers.
Command: "/usr/bin/python3" -m pip install xformers==0.0.16rc425 --prefer-binary
Error code: 1
stdout: Collecting xformers==0.0.16rc425
Downloading xformers-0.0.16rc425.tar.gz (7.3 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 7.3/7.3 MB 81.4 MB/s eta 0:00:00
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Requirement already satisfied: torch>=1.12 in /usr/local/lib/python3.11/dist-packages (from xformers==0.0.16rc425) (2.0.0+cu118)
Requirement already satisfied: numpy in /usr/local/lib/python3.11/dist-packages (from xformers==0.0.16rc425) (2.0.2)
Collecting pyre-extensions==0.0.23 (from xformers==0.0.16rc425)
Downloading pyre_extensions-0.0.23-py3-none-any.whl.metadata (4.0 kB)
Collecting typing-inspect (from pyre-extensions==0.0.23->xformers==0.0.16rc425)
Downloading typing_inspect-0.9.0-py3-none-any.whl.metadata (1.5 kB)
Requirement already satisfied: typing-extensions in /usr/local/lib/python3.11/dist-packages (from pyre-extensions==0.0.23->xformers==0.0.16rc425) (4.14.1)
Requirement already satisfied: filelock in /usr/local/lib/python3.11/dist-packages (from torch>=1.12->xformers==0.0.16rc425) (3.18.0)
Requirement already satisfied: sympy in /usr/local/lib/python3.11/dist-packages (from torch>=1.12->xformers==0.0.16rc425) (1.13.1)
Requirement already satisfied: networkx in /usr/local/lib/python3.11/dist-packages (from torch>=1.12->xformers==0.0.16rc425) (3.5)
Requirement already satisfied: jinja2 in /usr/local/lib/python3.11/dist-packages (from torch>=1.12->xformers==0.0.16rc425) (3.1.6)
Requirement already satisfied: triton==2.0.0 in /usr/local/lib/python3.11/dist-packages (from torch>=1.12->xformers==0.0.16rc425) (2.0.0)
Requirement already satisfied: cmake in /usr/local/lib/python3.11/dist-packages (from triton==2.0.0->torch>=1.12->xformers==0.0.16rc425) (3.31.6)
Requirement already satisfied: lit in /usr/local/lib/python3.11/dist-packages (from triton==2.0.0->torch>=1.12->xformers==0.0.16rc425) (18.1.8)
Requirement already satisfied: MarkupSafe>=2.0 in /usr/local/lib/python3.11/dist-packages (from jinja2->torch>=1.12->xformers==0.0.16rc425) (3.0.2)
Requirement already satisfied: mpmath<1.4,>=1.1.0 in /usr/local/lib/python3.11/dist-packages (from sympy->torch>=1.12->xformers==0.0.16rc425) (1.3.0)
Collecting mypy-extensions>=0.3.0 (from typing-inspect->pyre-extensions==0.0.23->xformers==0.0.16rc425)
Downloading mypy_extensions-1.1.0-py3-none-any.whl.metadata (1.1 kB)
Downloading pyre_extensions-0.0.23-py3-none-any.whl (11 kB)
Downloading typing_inspect-0.9.0-py3-none-any.whl (8.8 kB)
Downloading mypy_extensions-1.1.0-py3-none-any.whl (5.0 kB)
Building wheels for collected packages: xformers
Building wheel for xformers (setup.py): started
Building wheel for xformers (setup.py): finished with status 'error'
Running setup.py clean for xformers
Failed to build xformers
stderr: error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> See above for output.
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for xformers
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (xformers)
本文提供了解决Linux环境下Eclipse控制台Console出现g++ not found错误的详细步骤，包括安装g++、配置C/C++ Build设置及检查文件名等关键操作，帮助开发者顺利解决问题。
扫一扫
4253
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
