January, 8

I need more time (42)

Key vocabulary

1.       press kit=group of photos, documents, articles, and information about a company given to reporters, newspapers, magazines, etc.(资料宣传袋)

2.       I’ve been meaning=intend, plan to do something

3.       Extension=make a deadline longer, extra time to do something

4.       Finalize=finish, decide on all the details

5.       Delay=late

6.       Run into=meet or encounter

7.       Beyond someone’s control=not able to control something

8.       Put(something) off=plan to do something later

Can we put off the meeting to next week? I am very busy now.

A: So, Cassy, how are things going with the photos for the press kit?

B: Yeah, I’ve been meaning to talk to you about that. I might need to ask for an extension on that deadline.

A: You’ve had over a month to get this finalized! Why are things delayed?

B: Well, the thing is, we ran into a lot of problems…

A:I am not looking for excuses here. I just want to get this finished on time!

B: I know, and I apologize for the delay. But some things were just beyond my control. I had trouble booking the photographer, and then Michael was sick for three weeks, so I couldn’t include him in the photos and the design team lost all the files, so I had to re-do the pictures.

A: I am not going to put this off any longer, Casey! I want these photos ASAP!

一、综合实战—使用极轴追踪方式绘制信号灯 实战目标:利用对象捕捉追踪和极轴追踪功能创建信号灯图形 技术要点:结合两种追踪方式实现精确绘图,适用于工程制图中需要精确定位的场景 1. 切换至AutoCAD 操作步骤: 启动AutoCAD 2016软件 打开随书光盘中的素材文件 确认工作空间为"草图与注释"模式 2. 绘图设置 1)草图设置对话框 打开方式:通过"工具→绘图设置"菜单命令 功能定位:该对话框包含捕捉、追踪等核心绘图辅助功能设置 2)对象捕捉设置 关键配置: 启用对象捕捉(F3快捷键) 启用对象捕捉追踪(F11快捷键) 勾选端点、中心、圆心、象限点等常用捕捉模式 追踪原理:命令执行时悬停光标可显示追踪矢量,再次悬停可停止追踪 3)极轴追踪设置 参数设置: 启用极轴追踪功能 设置角度增量为45度 确认后退出对话框 3. 绘制信号灯 1)绘制圆形 执行命令:"绘图→圆→圆心、半径"命令 绘制过程: 使用对象捕捉追踪定位矩形中心作为圆心 输入半径值30并按Enter确认 通过象限点捕捉确保圆形位置准确 2)绘制直线 操作要点: 选择"绘图→直线"命令 捕捉矩形上边中点作为起点 捕捉圆的上象限点作为终点 按Enter结束当前直线命令 重复技巧: 按Enter可重复最近使用的直线命令 通过圆心捕捉和极轴追踪绘制放射状直线 最终形成完整的信号灯指示图案 3)完成绘制 验证要点: 检查所有直线是否准确连接圆心和象限点 确认极轴追踪的45度增量是否体现 保存绘图文件(快捷键Ctrl+S)
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值