(收藏)如何进入Vmware虚机的BIOS

本文介绍了在VMware中进入BIOS的方法,包括通过修改配置文件.vmx中的参数来实现自动进入BIOS或延长启动画面时间,帮助用户解决因系统启动过快而无法及时按下F2键进入BIOS的问题。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

由于VM的XP系统出了点问题,需要进入BIOS调整系统启动顺序。按照VMware启动画面提示有三个键可以使用(记住要点击进入VMware环境):


ESC: 调整启动顺序

F2: 进入BIOS Setup

F12: 网络启动


但实际上往往因VMware启动界面显示时间太短、系统无法识别按键而直接开启了系统(慢的host机器当然不存在这个问题)。尤其是ESC按次数多了就 是自己取消自己了:)
其实VMware的配置文件.vmx可以控制这个过程, 网上提示有两种参数可以设置,不过只有第一个经实验成功:

1. 加入一行:bios.forceSetupOnce = "TRUE" ;开机就自动进入BIOS!
不过VMware启动后,会将该参数由TRUE变为FALSE,如果您还要继续使用BIOS,就再手动改成TRUE即可;

2. 延长启动画面时间:bios.bootDelay = "5000";5000为5秒。不过我的VMware Workstation 6.5不识别这个参数,可能对老版本的VMware适用。


(以下是在没有中文输入法的机器上写下的笔记:
Today I just got to know there are some ways to boot into Vmware workstation's BIOS :

1. As Vmware prompt, press F2 to enter into setup. But there will be a problem. The system always runs faster then you hit F2. You always see the system boot into hard disk:( Not the BIOS you want to see;

2. Update the .vmx configuration file:
1) add :
bios.bootDelay = "5000"; this adds a 5000 ms (5 seconds)   But according to my test, Vmware could not recognize the parameter. I think this one only work for the old version VMware Workstation, it's not working for 6.5;
2) add 
bios.forceSetupOnce = "TRUE" ; 
This works fine. I entered into the BIOS directly after power on. (Remember, the next when you power on it will automatically change to "bios.forceSetupOnce = "False"". You have to change it back again. 
The attachment are the BIOS pictures. In fact not so much difference as the physical systems.

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值