崔华批量绑定模板生成SP

create or replace procedure P_SYS_GEN_CODE_TEMPLATE2
(i_vc_owner in varchar2,
 i_vc_tablename in varchar2,
 o_vc_return_flag out varchar2) is
/*
功能: 用于自动产生批量绑定使用模板二(即数据量未知情况下的批量处理)的代码架构
       适用于表的列名的长度全部为6的表,如果列名的长度不是固定为6,则打印Cursor对应SELECT语句时很可能会出现错位,需要手工调整
作者: cuihua
创建日期:2009-04-13

输入参数:
i_vc_owner:待产生代码结构的表名所在的schema名
i_vc_tablename:待产生代码结构的表名

输出参数:
o_vc_returnflag:用于判断该存储过程是否成功执行,并在出错后存储相应的错误原因。
如果它的值的第一位为S,则表明该存储过程成功执行,没有错误。
如果它的值的第一位为E,则表明该存储过程执行失败,具体错误原因为它的值的第二位到最后一位。

输入输出参数:
无

调用到的存储过程:
无

使用类型:
无
*/

type typ_columnname is table of all_tab_columns.COLUMN_NAME%type index by binary_integer;
columnnames typ_columnname;

vc_temp varchar2(4000);
n_temp number(13);
n_itemp number(13);

begin

  o_vc_return_flag := 'S';
  
  select column_name bulk collect into columnnames from all_tab_columns where owner=i_vc_owner and table_name=i_vc_tablename;
  
  ----------------------生成Bulk collect into所需的数组---------Begin--------------------------------------------------------------------------------------
  dbms_output.put_line('  --定义批量fetch的数量,建议值是1000;');
  dbms_output.put_line('  CN_BATCH_SIZE constant pls_integer := 1000;');
  
  dbms_output.put_line(chr(13));
   
  dbms_output.put_line('  --定义存放fetch出来的结果集的数组,建议值是1000'); 
  for i in columnnames.first .. columnnames.last loop       
    dbms_output.put_line('  type typ_' || lower(columnnames(i)) || ' is table of ' || lower(i_vc_tablename) || '.' || lower(columnnames(i)) || '%type index by binary_integer;');
    dbms_output.put_line('  ' || lower(columnnames(i)) || 's typ_' || lower(columnnames(i)) || ';');          
  end loop;
  
  dbms_output.put_line('  type typ_rid is table of urowid index by binary_integer;');
  dbms_output.put_line('  rids typ_rid;'); 
  ----------------------生成Bulk collect into所需的数组---------End--------------------------------------------------------------------------------------

  
  ----------------------生成cursor定义-------------------------Begin--------------------------------------------------------------------------------------
  dbms_output.put_line(chr(13));
  dbms_output.put_line('  cur_' || lower(i_vc_tablename) || ' sys_refcursor;');
   
  vc_temp := null;
  for i in columnnames.first .. columnnames.last loop 
    if( i = columnnames.count ) then
      vc_temp := vc_temp || lower(columnnames(i));
    else
      vc_temp := vc_temp || lower(columnnames(i)) || ',';      
    end if;                     
  end loop;
  
  n_temp := trunc(length(vc_temp)/49) + 1;
  n_itemp := 0;
  for i in 0 .. n_temp loop
    n_itemp := i*49 + 1;
    if( n_itemp <= length(vc_temp) ) then
      if( n_itemp = 1 ) then        
        --如果这里n_temp=1,则表明这个表的字段数小于7
        if ( n_temp = 1 ) then
          dbms_output.put_line('  vc_sql varchar2(4000) :=  ''select ' || substr(vc_temp,n_itemp,49) || ',rowid from ' || lower(i_vc_tablename) || ' where 自定义的带绑定变量的where条件'';');
        else
          dbms_output.put_line('  vc_sql varchar2(4000) :=  ''select ' || substr(vc_temp,n_itemp,49));
        end if;
      else
        if( n_itemp + 49 >= length(vc_temp) ) then
          dbms_output.put_line('       ' || substr(vc_temp,n_itemp,49) || ',rowid from ' || lower(i_vc_tablename) || ' where 自定义的带绑定变量的where条件'';');
        else
          dbms_output.put_line('       ' || substr(vc_temp,n_itemp,49));
        end if;        
      end if;      
    end if;                
  end loop;  
  ----------------------生成cursor定义--------------------------End--------------------------------------------------------------------------------------

  
  ----------------------生成cursor的循环部分的代码--------------begin--------------------------------------------------------------------------------------
  dbms_output.put_line(chr(13));  
  dbms_output.put_line('begin');  
  dbms_output.put_line(chr(13));
  
  dbms_output.put_line('  --带绑定变量的ref cursor的打开方式');
  dbms_output.put_line('  open cur_' || lower(i_vc_tablename) || ' for vc_sql using variable;');
  dbms_output.put_line(chr(13));  
  
  dbms_output.put_line('  --第二种处理方式,批量处理');
  dbms_output.put_line('  loop');
   
  vc_temp := null;
  for i in columnnames.first .. columnnames.last loop 
    if( i = columnnames.count ) then
      vc_temp := vc_temp || lower(columnnames(i)) || 's';
    else
      vc_temp := vc_temp || lower(columnnames(i)) || 's' || ',';
    end if;                     
  end loop;
  
  n_temp := trunc(length(vc_temp)/40) + 1;
  n_itemp := 0;
  for i in 0 .. n_temp loop
    n_itemp := i*40 + 1;
    if( n_itemp <= length(vc_temp) ) then
      if( n_itemp = 1 ) then
        --如果这里n_temp=1,则表明这个表的字段数小于7
        if ( n_temp = 1 ) then
          dbms_output.put_line('    fetch cur_' || lower(i_vc_tablename) || ' bulk collect into ' || substr(vc_temp,n_itemp,40) || ',rids limit CN_BATCH_SIZE;');
        else
          dbms_output.put_line('    fetch cur_' || lower(i_vc_tablename) || ' bulk collect into ' || substr(vc_temp,n_itemp,40));
        end if;
      else
        if( n_itemp + 40 >= length(vc_temp) ) then
          dbms_output.put_line('        ' || substr(vc_temp,n_itemp,40) || ',rids limit CN_BATCH_SIZE;');
        else
          dbms_output.put_line('        ' || substr(vc_temp,n_itemp,40));
        end if;
      end if;       
    end if;                
  end loop;
  
  dbms_output.put_line(chr(10));
  dbms_output.put_line('    for i in 1 .. rids.count loop');
  dbms_output.put_line('      --这里对bulk fetch出来的数组做处理');
  dbms_output.put_line('    end loop;');
  dbms_output.put_line(chr(10));
  dbms_output.put_line('    forall i in 1 .. rids.count');
  dbms_output.put_line('      execute immediate ''自定义的SQL文本'' using rids(i)或其它列;');
  dbms_output.put_line(chr(10));
  dbms_output.put_line('    exit when rids.count < CN_BATCH_SIZE;');
  dbms_output.put_line('  end loop;');
  dbms_output.put_line('  close cur_' || lower(i_vc_tablename) || ';');
  ----------------------生成cursor的循环部分的代码---------------End-------------------------------------------------------------------------------------- 
  
exception
  when others then
    o_vc_return_flag := 'E' || '_' || sqlcode || '_' || sqlerrm;    
    return;
  
end P_SYS_GEN_CODE_TEMPLATE2;

 

CH341A编程器是一款广泛应用的通用编程设备,尤其在电子工程和嵌入式系统开发领域中,它被用来烧录各种类型的微控制器、存储器和其他IC芯片。这款编程器的最新版本为1.3,它的一个显著特点是增加了对25Q256等32M芯片的支持。 25Q256是一种串行EEPROM(电可擦可编程只读存储器)芯片,通常用于存储程序代码、配置数据或其他非易失性信息。32M在这里指的是存储容量,即该芯片可以存储32兆位(Mbit)的数据,换算成字节数就是4MB。这种大容量的存储器在许多嵌入式系统中都有应用,例如汽车电子、工业控制、消费电子设备等。 CH341A编程器的1.3版更新,意味着它可以与更多的芯片型号兼容,特别是针对32M容量的芯片进行了优化,提高了编程效率和稳定性。26系列芯片通常指的是Microchip公司的25系列SPI(串行外围接口)EEPROM产品线,这些芯片广泛应用于各种需要小体积、低功耗和非易失性存储的应用场景。 全功能版的CH341A编程器不仅支持25Q256,还支持其他大容量芯片,这意味着它具有广泛的兼容性,能够满足不同项目的需求。这包括但不限于微控制器、EPROM、EEPROM、闪存、逻辑门电路等多种类型芯片的编程。 使用CH341A编程器进行编程操作时,首先需要将设备通过USB连接到计算机,然后安装相应的驱动程序和编程软件。在本例中,压缩包中的"CH341A_1.30"很可能是编程软件的安装程序。安装后,用户可以通过软件界面选择需要编程的芯片类型,加载待烧录的固件或数据,然后执行编程操作。编程过程中需要注意的是,确保正确设置芯片的电压、时钟频率等参数,以防止损坏芯片。 CH341A编程器1.3版是面向电子爱好者和专业工程师的一款实用工具,其强大的兼容性和易用性使其在众多编程器中脱颖而出。对于需要处理25Q256等32M芯片的项目,或者26系列芯片的编程工作,CH341A编程器是理想的选择。通过持续的软件更新和升级,它保持了与现代电子技术同步,确保用户能方便地对各种芯片进行编程和调试。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值