用存储过程实现的分页程序

本文介绍了一种使用存储过程实现的分页查询方法,适用于表、视图及复杂查询结果的分页展示。该方法针对不同场景进行了优化,如表中存在主键或标识列的情况直接查询原表,其他情况则采用临时表处理。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

分页查询           zjcxc   [原作]      
  关键字       分页    
  出处          
     
    /*--用存储过程实现的分页程序  
   
    显示指定表、视图、查询结果的第X页  
    对于表中主键或标识列的情况,直接从原表取数查询,其它情况使用临时表的方法  
    如果视图或查询结果中有主键,不推荐此方法  
   
  --*/  
   
  /*--调用示例  
    exec   p_show   '地区资料'  
   
    exec   p_show   '地区资料',5,3,'地区编号,地区名称,助记码','地区编号'  
  --*/  
   
  if   exists   (select   *   from   dbo.sysobjects   where   id   =   object_id(N'[dbo].[p_show]')   and   OBJECTPROPERTY(id,   N'IsProcedure')   =   1)  
  drop   procedure   [dbo].[p_show]  
  GO  
   
  CREATE   Proc   p_show  
  @QueryStr   nvarchar(4000),   --表名、视图名、查询语句  
  @PageSize   int=10,       --每页的大小(行数)  
  @PageCurrent   int=1,       --要显示的页  
  @FdShow   nvarchar   (4000)='',   --要显示的字段列表,如果查询结果有标识字段,需要指定此值,且不包含标识字段  
  @FdOrder   nvarchar   (1000)=''   --排序字段列表  
  as  
  declare   @FdName   nvarchar(250)   --表中的主键或表、临时表中的标识列名  
    ,@Id1   varchar(20),@Id2   varchar(20)   --开始和结束的记录号  
    ,@Obj_ID   int         --对象ID  
  --表中有复合主键的处理  
  declare   @strfd   nvarchar(2000)   --复合主键列表  
    ,@strjoin   nvarchar(4000)   --连接字段  
    ,@strwhere   nvarchar(2000)   --查询条件  
   
   
  select   @Obj_ID=object_id(@QueryStr)  
    ,@FdShow=case   isnull(@FdShow,'')   when   ''   then   '   *'   else   '   '+@FdShow   end  
    ,@FdOrder=case   isnull(@FdOrder,'')   when   ''   then   ''   else   '   order   by   '+@FdOrder   end  
    ,@QueryStr=case   when   @Obj_ID   is   not   null   then   '   '+@QueryStr   else   '   ('+@QueryStr+')   a'   end  
   
  --如果显示第一页,可以直接用top来完成  
  if   @PageCurrent=1    
  begin  
    select   @Id1=cast(@PageSize   as   varchar(20))  
    exec('select   top   '+@Id1+@FdShow+'   from   '+@QueryStr+@FdOrder)  
    return  
  end  
   
  --如果是表,则检查表中是否有标识更或主键  
  if   @Obj_ID   is   not   null   and   objectproperty(@Obj_ID,'IsTable')=1  
  begin  
    select   @Id1=cast(@PageSize   as   varchar(20))  
      ,@Id2=cast((@PageCurrent-1)*@PageSize   as   varchar(20))  
   
    select   @FdName=name   from   syscolumns   where   id=@Obj_ID   and   status=0x80  
    if   @@rowcount=0       --如果表中无标识列,则检查表中是否有主键  
    begin  
      if   not   exists(select   1   from   sysobjects   where   parent_obj=@Obj_ID   and   xtype='PK')  
        goto   lbusetemp     --如果表中无主键,则用临时表处理  
   
      select   @FdName=name   from   syscolumns   where   id=@Obj_ID   and   colid   in(  
        select   colid   from   sysindexkeys   where   @Obj_ID=id   and   indid   in(  
          select   indid   from   sysindexes   where   @Obj_ID=id   and   name   in(  
            select   name   from   sysobjects   where   xtype='PK'   and   parent_obj=@Obj_ID  
        )))  
      if   @@rowcount>1     --检查表中的主键是否为复合主键  
      begin  
        select   @strfd='',@strjoin='',@strwhere=''  
        select   @strfd=@strfd+',['+name+']'  
          ,@strjoin=@strjoin+'   and   a.['+name+']=b.['+name+']'  
          ,@strwhere=@strwhere+'   and   b.['+name+']   is   null'  
          from   syscolumns   where   id=@Obj_ID   and   colid   in(  
          select   colid   from   sysindexkeys   where   @Obj_ID=id   and   indid   in(  
            select   indid   from   sysindexes   where   @Obj_ID=id   and   name   in(  
              select   name   from   sysobjects   where   xtype='PK'   and   parent_obj=@Obj_ID  
          )))  
        select   @strfd=substring(@strfd,2,2000)  
          ,@strjoin=substring(@strjoin,5,4000)  
          ,@strwhere=substring(@strwhere,5,4000)  
        goto   lbusepk  
      end  
    end  
  end  
  else  
    goto   lbusetemp  
   
  /*--使用标识列或主键为单一字段的处理方法--*/  
  lbuseidentity:    
    exec('select   top   '+@Id1+@FdShow+'   from   '+@QueryStr  
      +'   where   '+@FdName+'   not   in(select   top   '  
      +@Id2+'   '+@FdName+'   from   '+@QueryStr+@FdOrder  
      +')'+@FdOrder  
      )  
    return  
   
  /*--表中有复合主键的处理方法--*/  
  lbusepk:      
    exec('select   '+@FdShow+'   from(select   top   '+@Id1+'   a.*   from  
      (select   top   100   percent   *   from   '+@QueryStr+@FdOrder+')   a  
      left   join   (select   top   '+@Id2+'   '+@strfd+'    
      from   '+@QueryStr+@FdOrder+')   b   on   '+@strjoin+'  
      where   '+@strwhere+')   a'  
      )  
    return  
   
  /*--用临时表处理的方法--*/  
  lbusetemp:      
  select   @FdName='[ID_'+cast(newid()   as   varchar(40))+']'  
    ,@Id1=cast(@PageSize*(@PageCurrent-1)   as   varchar(20))  
    ,@Id2=cast(@PageSize*@PageCurrent-1   as   varchar(20))  
   
  exec('select   '+@FdName+'=identity(int,0,1),'+@FdShow+'  
      into   #tb   from'+@QueryStr+@FdOrder+'  
    select   '+@FdShow+'   from   #tb   where   '+@FdName+'   between   '  
    +@Id1+'   and   '+@Id2  
    )  
   
  GO   
  
 
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值