为UIView添加上下左右滑动操作

本文介绍了两种实现iOS中滑动手势的方法。一种是利用UISwipeGestureRecognizer简化手势响应过程,另一种是通过跟踪触摸事件来判断滑动方向。这两种方法各有优势,可根据实际需求选择使用。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

方法一: 
在viewDidLoad时为UIView添加操作 

  1. UISwipeGestureRecognizer *recognizer;  
  2. recognizer [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(handleSwipeFrom:)];  
  3. [recognizer setDirection:(UISwipeGestureRecognizerDirectionRight)];  
  4. [[self view] addGestureRecognizer:recognizer];  
  5. [recognizer release];  
  6.   
  7. recognizer [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(handleSwipeFrom:)];  
  8. [recognizer setDirection:(UISwipeGestureRecognizerDirectionLeft)];  
  9. [[self view] addGestureRecognizer:recognizer];  
  10. [recognizer release];  
  11.   
  12. recognizer [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(handleSwipeFrom:)];  
  13. [recognizer setDirection:(UISwipeGestureRecognizerDirectionUp)];  
  14. [[self view] addGestureRecognizer:recognizer];  
  15. [recognizer release];  
  16.   
  17. recognizer [[UISwipeGestureRecognizer alloc] initWithTarget:self action:@selector(handleSwipeFrom:)];  
  18. [recognizer setDirection:(UISwipeGestureRecognizerDirectionDown)];  
  19. [[self view] addGestureRecognizer:recognizer];  
  20. [recognizer release];  

响应操作绑定的事件 

  1. (void)handleSwipeFrom:(UISwipeGestureRecognizer *)recognizer{  
  2.         //UISwipeGestureRecognizerDirectionLeft   UISwipeGestureRecognizerDirectionRight  UISwipeGestureRecognizerDirectionUp  UISwipeGestureRecognizerDirectionDown  
  3.     if (recognizer.direction==UISwipeGestureRecognizerDirectionLeft  
  4.         NSLog(@"Left");   
  5.      
  6.       
  7.  

方法二: 

  1. #define HORIZ_SWIPE_DRAG_MIN 12  
  2. #define VERT_SWIPE_DRAG_MAX 4  
  3. CGPoint startTouchPosition;  
  4. NSString *dirString  
  5.   
  6. (void)touchesBegan:(NSSet *)touches withEvent:(UIEvent *)event{  
  7.     UITouch *touch touches.anyObject;  
  8.     startTouchPosition [touch locationInView:self.view];  
  9.  
  10.   
  11. (void)touchesMoved:(NSSet *)touches withEvent:(UIEvent *)event      
  12.      
  13.     UITouch *touch touches.anyObject;      
  14.     CGPoint currentTouchPosition [touch locationInView:self.view];  
  15.     if (fabsf(startTouchPosition.x currentTouchPosition.x) >=      
  16.         HORIZ_SWIPE_DRAG_MIN &&      
  17.         fabsf(startTouchPosition.y currentTouchPosition.y) <=      
  18.         VERT_SWIPE_DRAG_MAX)      
  19.          
  20.         // Horizontal Swipe     
  21.         if (startTouchPosition.x currentTouchPosition.x)     
  22.             NSLog(@"from left");     
  23.             dirString @"left" 
  24.             
  25.         else     
  26.             NSLog(@"from right");     
  27.             dirString @"right";}  
  28.              
  29.    else if (fabsf(startTouchPosition.y currentTouchPosition.y) >=      
  30.              HORIZ_SWIPE_DRAG_MIN &&      
  31.              fabsf(startTouchPosition.x currentTouchPosition.x) <=      
  32.              VERT_SWIPE_DRAG_MAX)     
  33.          
  34.         // Vertical Swipe     
  35.         if (startTouchPosition.y currentTouchPosition.y)     
  36.             NSLog(@"from bottom");  
  37.             dirString @"bottom";}  
  38.         else     
  39.             NSLog(@"from top");  
  40.             dirString @"top";}  
  41.     else      
  42.         
  43.         //dirString @"";  
  44.         
  45.   
  46.   
  47. (void)touchesEnded:(NSSet *)touches withEvent:(UIEvent *)event{  
  48.     if (dirString == @"right" 
  49.         NSLog(@"event right");  
  50.     }else if (dirString == @"left" 
  51.         NSLog(@"event left");  
  52.      
  53.  
内容概要:该论文探讨了一种基于粒子群优化(PSO)的STAR-RIS辅助NOMA无线通信网络优化方法。STAR-RIS作为一种新型可重构智能表面,能同时反射和传输信号,与传统仅能反射的RIS不同。结合NOMA技术,STAR-RIS可以提升覆盖范围、用户容量和频谱效率。针对STAR-RIS元素众多导致获取完整信道状态信息(CSI)开销大的问题,作者提出一种在不依赖完整CSI的情况下,联合优化功率分配、基站波束成形以及STAR-RIS的传输和反射波束成形向量的方法,以最大化总可实现速率并确保每个用户的最低速率要求。仿真结果显示,该方案优于STAR-RIS辅助的OMA系统。 适合人群:具备一定无线通信理论基础、对智能反射面技术和非正交多址接入技术感兴趣的科研人员和工程师。 使用场景及目标:①适用于希望深入了解STAR-RIS与NOMA结合的研究者;②为解决无线通信中频谱资源紧张、提高系统性能提供新的思路和技术手段;③帮助理解PSO算法在无线通信优化问题中的应用。 其他说明:文中提供了详细的Python代码实现,涵盖系统参数设置、信道建模、速率计算、目标函数定义、约束条件设定、主优化函数设计及结果可视化等环节,便于读者理解和复现实验结果。此外,文章还对比了PSO与其他优化算法(如DDPG)的区别,强调了PSO在不需要显式CSI估计方面的优势。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值