Linux Firewalls: Attack Detection and Response--Chapter 1: Care and Feeding of iptables-优快云博客

本文提供了一段用于构建iptables默认策略的脚本，适用于本地网络防火墙部署，包括默认策略设置、规则创建以及模块加载等关键步骤。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

引用：http://www.cipherdyne.org/LinuxFirewalls/

Chapter 1: Care and Feeding of iptables

Chapter 1 provides an introduction to packet filtering with iptables, including kernel build specifics and iptables administration. A default policy and network diagram is provided in this chapter and is referenced throughout the book. The Linux machine that runs the default policy functions as the firewall for a local area network (LAN), and attacks against this system are illustrated in later chapters.

Here is a script that builds the default iptables policy used throughout the book. This script is meant to be executed on the iptables firewall system in the following diagram, and you can modify this script to your liking for your own systems (the script is displayed below for reference as well).

#!/bin/sh
#
#############################################################################
#
# File: iptables.sh
#
# Purpose: To build a basic iptables policy with default log and drop rules.
#          This script was written for the book "Linux Firewalls: Attack
#          Detection and Response" published by No Starch Press.
#
# Copyright (C) 2006-2012 Michael Rash (mbr@cipherdyne.org)
#
# License (GNU Public License):
#
#   This program is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
#   GNU General Public License for more details.
#
#   You should have received a copy of the GNU General Public License
#   along with this program; if not, write to the Free Software
#   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
#   USA
#
#
#############################################################################
#

IPTABLES=/sbin/iptables
IP6TABLES=/sbin/ip6tables
MODPROBE=/sbin/modprobe
INT_NET=192.168.10.0/24
INT_INTF=eth1
EXT_INTF=eth0

### flush existing rules and set chain policy setting to DROP
echo "[+] Flushing existing iptables rules..."
$IPTABLES -F
$IPTABLES -F -t nat
$IPTABLES -X
$IPTABLES -P INPUT DROP
$IPTABLES -P OUTPUT DROP
$IPTABLES -P FORWARD DROP

### this policy does not handle IPv6 traffic except to drop it.
#
echo "[+] Disabling IPv6 traffic..."
$IP6TABLES -P INPUT DROP
$IP6TABLES -P OUTPUT DROP
$IP6TABLES -P FORWARD DROP

### load connection-tracking modules
#
$MODPROBE ip_conntrack
$MODPROBE iptable_nat
$MODPROBE ip_conntrack_ftp
$MODPROBE ip_nat_ftp

###### INPUT chain ######
#
echo "[+] Setting up INPUT chain..."

### state tracking rules
$IPTABLES -A INPUT -m conntrack --ctstate INVALID -j LOG --log-prefix "DROP INVALID " --log-ip-options --log-tcp-options
$IPTABLES -A INPUT -m conntrack --ctstate INVALID -j DROP
$IPTABLES -A INPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

### anti-spoofing rules
$IPTABLES -A INPUT -i $INT_INTF ! -s $INT_NET -j LOG --log-prefix "SPOOFED PKT "
$IPTABLES -A INPUT -i $INT_INTF ! -s $INT_NET -j DROP

### ACCEPT rules
$IPTABLES -A INPUT -i $INT_INTF -p tcp -s $INT_NET --dport 22 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A INPUT -p icmp --icmp-type echo-request -j ACCEPT

### default INPUT LOG rule
$IPTABLES -A INPUT ! -i lo -j LOG --log-prefix "DROP " --log-ip-options --log-tcp-options

### make sure that loopback traffic is accepted
$IPTABLES -A INPUT -i lo -j ACCEPT

###### OUTPUT chain ######
#
echo "[+] Setting up OUTPUT chain..."

### state tracking rules
$IPTABLES -A OUTPUT -m conntrack --ctstate INVALID -j LOG --log-prefix "DROP INVALID " --log-ip-options --log-tcp-options
$IPTABLES -A OUTPUT -m conntrack --ctstate INVALID -j DROP
$IPTABLES -A OUTPUT -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

### ACCEPT rules for allowing connections out
$IPTABLES -A OUTPUT -p tcp --dport 21 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 22 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 25 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 43 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 80 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 4321 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p tcp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p udp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A OUTPUT -p icmp --icmp-type echo-request -j ACCEPT

### default OUTPUT LOG rule
$IPTABLES -A OUTPUT ! -o lo -j LOG --log-prefix "DROP " --log-ip-options --log-tcp-options

### make sure that loopback traffic is accepted
$IPTABLES -A OUTPUT -o lo -j ACCEPT

###### FORWARD chain ######
#
echo "[+] Setting up FORWARD chain..."

### state tracking rules
$IPTABLES -A FORWARD -m conntrack --ctstate INVALID -j LOG --log-prefix "DROP INVALID " --log-ip-options --log-tcp-options
$IPTABLES -A FORWARD -m conntrack --ctstate INVALID -j DROP
$IPTABLES -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT

### anti-spoofing rules
$IPTABLES -A FORWARD -i $INT_INTF ! -s $INT_NET -j LOG --log-prefix "SPOOFED PKT "
$IPTABLES -A FORWARD -i $INT_INTF ! -s $INT_NET -j DROP

### ACCEPT rules
$IPTABLES -A FORWARD -p tcp -i $INT_INTF -s $INT_NET --dport 21 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp -i $INT_INTF -s $INT_NET --dport 22 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp -i $INT_INTF -s $INT_NET --dport 25 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp -i $INT_INTF -s $INT_NET --dport 43 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 80 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 443 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp -i $INT_INTF -s $INT_NET --dport 4321 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p tcp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p udp --dport 53 -m conntrack --ctstate NEW -j ACCEPT
$IPTABLES -A FORWARD -p icmp --icmp-type echo-request -j ACCEPT

### default LOG rule
$IPTABLES -A FORWARD ! -i lo -j LOG --log-prefix "DROP " --log-ip-options --log-tcp-options

###### NAT rules ######
#
echo "[+] Setting up NAT rules..."
$IPTABLES -t nat -A PREROUTING -p tcp --dport 80 -i $EXT_INTF -j DNAT --to 192.168.10.3:80
$IPTABLES -t nat -A PREROUTING -p tcp --dport 443 -i $EXT_INTF -j DNAT --to 192.168.10.3:443
$IPTABLES -t nat -A PREROUTING -p udp --dport 53 -i $EXT_INTF -j DNAT --to 192.168.10.4:53
$IPTABLES -t nat -A POSTROUTING -s $INT_NET -o $EXT_INTF -j MASQUERADE

###### forwarding ######
#
echo "[+] Enabling IP forwarding..."
echo 1 > /proc/sys/net/ipv4/ip_forward

exit
### EOF ###