man hciattach

最新推荐文章于 2023-07-24 10:23:40 发布

转载最新推荐文章于 2023-07-24 10:23:40 发布 · 1.3k 阅读

基本知识同时被 2 个专栏收录

97 篇文章

订阅专栏

Linux

19 篇文章

订阅专栏

hciattach程序用于将串口UART设备附着为蓝牙协议栈的hci层传输接口。支持多种蓝牙设备类型，如Ericsson模块、Digi卡片等，并可指定串口设备、速度等参数。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

hciattach

——————————————————————————–

SYNOPSIS
hciattach < tty > < type | id > [ speed ] [ flow ]

DESCRIPTION
Hciattach is used to attach a serial UART to the Bluetooth stack as HCI
transport interface.

hciattach程序用来附着一个串口UART设备作为蓝牙协议栈的hci层传输接口。

OPTIONS
       <tty> This specifies the serial device to attach. A leading /dev can
              be omitted. Examples: /dev/ttyS1 ttyS2
               定义使用哪一个串口设备。
       <type | id>
              The type or id of the Bluetooth device that is to be attached,
              i.e. vendor or other device specific identifier. Currently sup-
              ported types are
               定义蓝牙通过串口连接的蓝牙设备的类型或者厂家ID。目前支持的类型有
              type   description

any Unspecified HCI_UART interface, no vendor specific
options

ericsson
Ericsson based modules

digi Digianswer based cards

xircom Xircom PCMCIA cards: Credit Card Adapter and Real Port
Adapter

csr CSR Casira serial adapter or BrainBoxes serial dongle
(BL642)

bboxes BrainBoxes PCMCIA card (BL620)

swave Silicon Wave kits

bcsp Serial adapters using CSR chips with BCSP serial protocol
使用CSR蓝牙核，串口传输协议使用BCSP的串口蓝牙适配器。

Supported IDs are (manufacturer id, product id)

              0×0105, 0×080a
                     Xircom PCMCIA cards: Credit Card Adapter and Real Port
                     Adapter

0×0160, 0×0002
BrainBoxes PCMCIA card (BL620)

       <speed>
              The speed specifies the UART speed to use. Baudrates higher than
              115.200bps require vendor specific initializations that are not
              implemented for all types of devices. In general the following

Written by Maxim Krasnyansky <maxk@qualcomm.com>

man page by Nils Faerber <nils@kernelconcepts.de>

来源：http://blog.donews.com/zhuyong/archive/2004/10/19/139500.aspx