fedora 12 mplayer 安装

本文介绍如何在Fedora Core 12中安装MPlayer及其GUI前端。首先需要添加RPM Fusion仓库,然后使用yum命令安装MPlayer GUI、Xine或VLC等多媒体播放器。此外还提供了解决播放AVI文件遇到的问题的方法。

转载http://www.redips.net/linux/yum-install-mplayer-fedora12/

How to install mplayer in Fedora Core 12

Before mplayer-gui installation in Fedora Core 12, you will have to add RPM Fusion repositories. After that, yum will resolve all dependencies and mplayer will be installed in a minute.

How to add RPM Fusion repositories?

  1. # add RPM Fusion repository with the rpm command   
  2. rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm  
  3. rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm  
# add RPM Fusion repository with the rpm command
rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm

If you have proxy problems, please use --httpproxy switch in rpm command. If you still have problems, you can manually download free and nonfree repositories and then install them from the local directory:

  1. rpm -Uvh rpmfusion-free-release-stable.noarch.rpm rpmfusion-nonfree-release-stable.noarch.rpm  
rpm -Uvh rpmfusion-free-release-stable.noarch.rpm rpmfusion-nonfree-release-stable.noarch.rpm

Detailed information about configuring RPM Fusion repositories can be found at http://rpmfusion.org/Configuration page. Finally, Fedora Core 12 is ready for mplayer-gui , xine or vlc installation.

  1. yum install mplayer-gui  
  2. yum install xine  
  3. yum install vlc  
yum install mplayer-gui
yum install xine
yum install vlc

And small issue before the end. Instead of playing AVI, mplayer gave me the following message:

Error opening/initializing the selected video_out (-vo) device

The solution was to change output video device in mplayer-gui to xv , gl , ... (depends on your video hardware but in general, xv should work):

  1. mplayer-gui -> Preferences -> Video -> xv  
mplayer-gui -> Preferences -> Video -> xv

Cheers!

我一般都是装smplayer,是mplayer的前端,比mplayer-gui好用多了
yum install smplayer

基于51单片机,实现对直流电机的调速、测速以及正反转控制。项目包含完整的仿真文件、源程序、原理图和PCB设计文件,适合学习和实践51单片机在电机控制方面的应用。 功能特点 调速控制:通过按键调整PWM占空比,实现电机的速度调节。 测速功能:采用霍尔传感器非接触式测速,实时显示电机转速。 正反转控制:通过按键切换电机的正转和反转状态。 LCD显示:使用LCD1602液晶显示屏,显示当前的转速和PWM占空比。 硬件组成 主控制器:STC89C51/52单片机(与AT89S51/52、AT89C51/52通用)。 测速传感器:霍尔传感器,用于非接触式测速。 显示模块:LCD1602液晶显示屏,显示转速和占空比。 电机驱动:采用双H桥电路,控制电机的正反转和调速。 软件设计 编程语言:C语言。 开发环境:Keil uVision。 仿真工具:Proteus。 使用说明 液晶屏显示: 第一行显示电机转速(单位:转/分)。 第二行显示PWM占空比(0~100%)。 按键功能: 1键:加速键,短按占空比加1,长按连续加。 2键:减速键,短按占空比减1,长按连续减。 3键:反转切换键,按下后电机反转。 4键:正转切换键,按下后电机正转。 5键:开始暂停键,按一下开始,再按一下暂停。 注意事项 磁铁和霍尔元件的距离应保持在2mm左右,过近可能会在电机转动时碰到霍尔元件,过远则可能导致霍尔元件无法检测到磁铁。 资源文件 仿真文件:Proteus仿真文件,用于模拟电机控制系统的运行。 源程序:Keil uVision项目文件,包含完整的C语言源代码。 原理图:电路设计原理图,详细展示了各模块的连接方式。 PCB设计:PCB布局文件,可用于实际电路板的制作。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值