基于Linux的opencv+QT开发环境搭建

最新推荐文章于 2022-08-31 18:18:28 发布

原创最新推荐文章于 2022-08-31 18:18:28 发布 · 546 阅读

0 ·

CC 4.0 BY-SA版权

开源代码专栏收录该内容

14 篇文章

订阅专栏

本文详细记录了在Ubuntu 12.10环境下，使用arm-linux-gcc将OpenCV 2.0移植到三星Cortex-A8板子上的全过程，包括依赖库的安装、配置及遇到的问题解决方法。

本来打算移植opencv2.0的没想到各种问题，起初怀疑是我的工具链版本问题，不过还没定位，后续还会继续尝试，我的搭建环境：

Ubuntu12.10 arm-linux-gcc 4.4.1 移植到三星cotex-A8的板子

Zlib-1.2.3

CC=arm-linux-gcc ./configure --prefix=/opt/arm --libdir=/opt/arm/lib --includedir=/opt/arm/include

make;make install（我这里install没有改变root权限是因为我把安装目录的权限改了）

Libpng-1.2.19

CC=arm-linux-gcc ./configure --prefix=/opt/arm --host=arm-linux --enable-shared LIBS=-L/opt/arm/lib CPPFLAGS=-I/opt/arm/include

make;make install

Jpegsrc v6

找不到libtool然后进入jpeg-6b的源码目录 #cp /usr/share/libtool/config/config.sub .

#cp /usr/share/libtool/config/config.guess .

重新configure make

Make install 找不到/opt/arm/man/man1 mkdir /opt/arm/man/man1重新make install

CC=arm-linux-gcc ./configure --prefix=/opt/arm --host=arm-linux --enable-shared LIBS=-L/opt/arm/lib CPPFLAGS=-I/opt/arm/include

make;make install

Opencv-1.0.0

./configure --host=arm-linux --disable-openmp --without-gtk --without-swig --without-python --without-carbon --without-ffmpeg --without-1394libs --without-quicktime --without-gstreamer --enable-shared CXX=arm-linux-g++ CC=arm-linux-gcc CPPFLAGS=-I/opt/arm-linux/arm-2009q3/arm-none-linux-gnueabi/include LDFLAGS=-/opt/arm-linux/arm-2009q3/arm-none-linux-gnueabi/lib --prefix=/opt/arm/opencv --libdir=/opt/arm/opencv/lib --includedir=/opt/arm/opencv/include

make;make install

1．修改/opt/qt-4.7.1/mkspecs/default/qmake.conf

INCLUDEPATH += /opt/arm/opencv/include/opencv

LIBS += /opt/arm/opencv/lib/libcv.so \

/opt/arm/opencv/lib/libcvaux.so \

/opt/arm/opencv/lib/libcxcore.so \

/opt/arm/opencv/lib/libhighgui.so \

/opt/arm/opencv/lib/libml.so

2．/etc/ld.so.conf.d/添加链接路径

3．修改LD_LIBRARY_PATH环境变量

4．Qt调用Opencv库的配置

在建立的.pro文件后面添加