1、RTL8188ETV USB接口,kernel部分需要查找一下驱动;
2、kernel部分修改:
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
old mode 100644
new mode 100755
index d4035a3..5972453
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-ddr4-v10.dtsi
@@ -469,6 +469,7 @@
};
&wireless_wlan {
+ status = "disabled";
pinctrl-names = "default";
pinctrl-0 = <&wifi_host_wake_irq>;
WIFI,host_wake_irq = <&gpio3 RK_PD4 GPIO_ACTIVE_HIGH>;
@@ -486,5 +487,5 @@
BT,reset_gpio = <&gpio3 RK_PA0 GPIO_ACTIVE_HIGH>;
BT,wake_gpio = <&gpio3 RK_PA2 GPIO_ACTIVE_HIGH>;
BT,wake_host_irq = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ status = "disabled";
};
diff --git a/arch/arm64/configs/rockchip_defconfig b/arch/arm64/configs/rockchip_defconfig
index ff0cf61..f65a3b3 100644
--- a/arch/arm64/configs

本文介绍如何为Rockchip RK3568 EVB1 DDR4开发板配置无线局域网(WLAN),包括禁用无线模块、添加RTL8188ETV USB接口驱动及相应配置项,适用于arm64架构。
最低0.47元/天 解锁文章
3581

被折叠的 条评论
为什么被折叠?



