Failed to get convolution algorithm. This is probably because cuDNN failed to initialize【解决】

最新推荐文章于 2025-02-11 11:14:48 发布
最新推荐文章于 2025-02-11 11:14:48 发布
阅读量9.6k 收藏 6
点赞数 1
分类专栏： 软件安装 文章标签： cudnn tensorflow cuda 深度学习
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.youkuaiyun.com/libertyhhn/article/details/87972107
版权

已安装系统背景

1、tensorflow-gpu==1.12

2、cuda9.0

3、cudnn-9.0-linux-x64-v7.tgz

4、ubuntu系统

在运行代码的时候出现了报错

UnknownError (see above for traceback): Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above.
[[node FeatureExtractor/MobilenetV1/MobilenetV1/Conv2d_0/Conv2D (defined at /home/user/faster_rcnn_inception_v2_coco_2018_01_28/base_model.py:36) = Conv2D[T=DT_FLOAT, data_format="NCHW", dilations=[1, 1, 1, 1], padding="SAME", strides=[1, 1, 2, 2], use_cudnn_on_gpu=true, _device="/job:localhost/replica:0/task:0/device:GPU:0"](FeatureExtractor/MobilenetV1/MobilenetV1/Conv2d_0/Conv2D-0-TransposeNHWCToNCHW-LayoutOptimizer, FeatureExtractor/MobilenetV1/Conv2d_0/weights/read/_4__cf__7)]]
[[{ {node Postprocessor/BatchMultiClassNonMaxSuppression/map/while/MultiClassNonMaxSupp

最低0.47元/天 解锁文章
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
jacke121的专栏
11-04 2784
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize 原因：import torch 解决方法： 1.把import torch注释掉 2.import torch 改到tf下面 下面是报错代码： D:\ProgramData\Miniconda3\pyth...
UnknownError: Failed to get convolution algorithm. This is probably because cuDNN failed 报错 Jupyter
Welcome
11-02 489
未知错误：获取卷积算法失败。这可能是因为cuDNN失败了。 这可能是由于显存被占用，详细原因可看这篇。 关于keras or tensorflow 显存占用问题 ： keras or tensorflow 显存占用问题 - 简书 解决方法： 1. 如果用的是Keras，在jupyter notebook 最开始添加代码： import tensorflow as tf import numpy as np import keras config = tf.compat.v1.ConfigP
Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so
12-22
every blog every motto: Brevity is the soul of wit 0. 前言 在用tensorflow 进行训练时，添加了如下代码： Error : Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. 主要原因是版本问题，还有可能是没有安装cuda / cudnn ,具体可在pycharm的设置中查看
报错：Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initial
JJJasmine的H君的博客
08-22 3030
一、问题描述 我在使用tensorflow-gpu的时候出现了报错：1) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above.这个错误。 二、问题分析 1、这个报错信息翻译回中文，大概就是说无法获取...
nvidia-smi Failed to initialize NVML: Unknown Error
最新发布
sqlora的专栏
02-11 1328
容器运行的过程中，由于安装了一些软件，导致nvidia-smi报错Failed to initialize NVML: Unknown Error。-rwxr-xr-x 1 root root 405 2月 10 09:58 docker-compose.yml*下边不小心把1.1保存成1.0了，所以yml配置文件启动之前还得修改一下对应。保存commit容器，然后重启容器即可。
TensorFlow报错：This is probably because cuDNN failed to initialize
小花生的博客
06-10 379
TensorFlow报错：This is probably because cuDNN failed to initialize tensorflow.python.framework.errors_impl.UnknownError: 2 root error(s) found. (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try lo
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try…
01-06
This is probably because cuDNN failed to initialize, so try…”于是打开retrain.py文件，在前面加上如下代码： from tensorflow.compat.v1 import ConfigProto from tensorflow.compat.v1 import ...
解决Failed to get convolution algorithm. This is probably because cuDNN failed to initialize
qq_38835585的博客
09-23 8415
问题如下： UnknownError (see above for traceback): Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. [[node conv2d_1/convolution (defined at C:\Us
【深度学习】Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so t
m0_52357468的博客
03-09 1155
本人TensorFlow-gpu 2.0 电脑显卡1650ti。 有时候电脑明明gpu没任何占用，跑深度学习代码还是会出现以下这个报错： UnknownError: 2 root error(s) found. (0) Unknown: Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log messa
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize……
qq_35436571的博客
07-30 1810
先说我的环境配置：Windows10，GTX1660Ti，TensorFlow-gpu 1.14.0，CUDA 10 千辛万苦终于装好了tensorflow-gpu，以为可以愉快的跑模型了，谁知道又报出cuDNN的错，真是一口老血喷撒。 经过一番查找，最后总结出以下经验，仅供参考： 关于这个错，网上有两种说法， 第一，TensorFlow-gpu版本过高问题，目前此呼声最高，基本都是说需要降到1....
TensorFlow框架This is probably because cuDNN failed to initialize 解决对策整理和验证
热门推荐
第一段代码的博客
03-24 1万+
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try looking to see if a warning log message was printed above. 写在前面： 环境:Tensorflow2.0 + Python3.6 当读者看到此问...
“Failed to get convolution algorithm. This is probably because cuDNN failed to initialize”错误的解决办法
qq_40245400的博客
10-21 472
https://blog.csdn.net/tsyccnh/article/details/102938368 最近在使用TF2.0。运行程序出现以下错误。 “Failed to get convolution algorithm. This is probably because cuDNN failed to initialize” 一开始怀疑是CUDA和CuDNN配置错误（要求版本匹配）。反复试验后，还是有这个错误。 最后发现可能是GPU内存不足造成的。需要在程序前加以下一段代码： from ten
Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try...
weixin_42076509的博客
02-20 562
使用inception-V3批处理文件retrain.bat进行预训练时，发现报错“Failed to get convolution algorithm. This is probably because cuDNN failed to initialize, so try…”于是打开retrain.py文件，在前面加上如下代码： from tensorflow.compat.v1 import...
tensorflow报错：Failed to get convolution algorithm.This is probably because cuDNN failed to initialize
qingtian11112的博客
07-08 1705
系统：ubuntu16.04 显卡：RTX2060 NVIDIA 驱动：440.100 CUDA版本: 10.0.130 cudnn版本: 7.4.2 tensorflow版本：tensorflow-gpu 1.13.1 使用tensorflow的卷积层时报如下错误： tensorflow.python.framework.errors_impl.UnknownError: Failed to get convolution algorithm. This is probably because cuDN
【TensorFlow2.0】This is probably because cuDNN failed to initialize.错误修正和cuDNN版本更新
licui8068的博客
01-16 1906
今天在环境Ubuntu16.04+TensorFlow2.0+CUDA10.1+cuDNN7.5.0中训练模型，本来是使用CPU计算的，但是后来数据量扩大后CPU已经不能满足需求了，于是便安装了TensorFlow2.0-gpu进行训练。 错误 本来已经挺简单的，因为之前在TensorFlow-gpu1.14+CUDA10.1+cuDNN7.5.0的环境下进行过训练，但是没想到会出现错误 F...
“Failed to get convolution algorithm. This is probably because cuDNN failed to initialize”错误解决方案
得峰的专栏 [网络收藏]
08-18 782
最近在使用TF2.0。运行程序出现以下错误。 Failed to get convolution algorithm. This is probably because cuDNN failed to initialize 一开始怀疑是CUDA和CuDNN配置错误（要求版本匹配）。反复试验后，还是有这个错误。 最后发现可能是GPU显存不足造成的。需要在程序前加以下一段代码： from tensorflow.compat.v1 import ConfigProto from tensorflow.
(0) unknown: failed to get convolution algorithm. this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.
04-11
Q: "b'(0) unknown: failed to get convolution algorithm. this is probably because cudnn failed to initialize, so try looking to see if a warning log message was printed above.'." 的意思是什么？ A: 这个错误提示表示在获取卷积算法时出现了问题，原因很可能是因为CUDNN未能正确初始化。建议查看上面是否有警告日志消息。
评论 18
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值