华三接入层交换机配置举例

<H3C>sys
[H3C]sysname wushuichuli
[wushuichuli]
[wushuichuli]vlan 251
[wushuichuli-vlan251]int vlan 251
[wushuichuli-Vlan-interface251]ip add 172.30.251.17 24
[wushuichuli-Vlan-interface251]qu
[wushuichuli]vlan 15
[wushuichuli-vlan15]qu
[wushuichuli]int ra g1/0/1 to g1/0/24
[wushuichuli-if-range]port link-type acc
[wushuichuli-if-range]port acc vlan 15
[wushuichuli-if-range]qu
[wushuichuli]int ra g1/0/25 to g1/0/28
[wushuichuli-if-range]port link-type trunk
[wushuichuli-if-range]port trunk permit vlan 15 251
[wushuichuli-if-range]qu
[wushuichuli]telnet server enable
[wushuichuli]ssh server enable
[wushuichuli]local-user liqiusheng class manage
[wushuichuli-luser-manage-admin]password simple liqiusheng6301
[wushuichuli-luser-manage-admin]service-type telnet  ssh  terminal http
[wushuichuli-luser-manage-admin]authorization-attribute user-role level-15
[wushuichuli-luser-manage-admin]qu
[wushuichuli]line aux 0
[wushuichuli]authentication-mode none
[wushuichuli]line vty 0 5
[wushuichuli-line-vty0-5]authentication-mode scheme
[wushuichuli-line-vty0-5]qu
[wushuichuli]ip route-static 0.0.0.0 0 172.30.251.254
[wushuichuli]snmp-agent community read cisco
[wushuichuli]snmp-agent community write cisco
[wushuichuli]snmp-agent sys-info version all
[wushuichuli]save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/startup.cfg]
(To leave the existing filename unchanged, press the enter key):(回车）
flash:/startup.cfg exists, overwrite? [Y/N]:Y
Validating file. Please wait...
Saved the current configuration to mainboard device successfully.
[wushuichuli]