Ubuntu16.04 静态IP配置

本文档详细介绍了如何在Ubuntu16.04操作系统中为网络接口配置静态IP地址,包括编辑/etc/network/interfaces文件的具体步骤及重启网络的操作。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Ubuntu16.04 静态IP配置

修改配置

登录系统后,编辑文件/etc/network/interfaces。原始的内容如下:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eno1
iface eno1 inet dhcp
# This is an autoconfigured IPv6 interface
iface eno1 inet6 auto

修改成如下内容:

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
auto eno1

iface eno1 inet static
address 192.168.0.100
netmask 255.255.255.0
gateway 192.168.0.254

# This is an autoconfigured IPv6 interface
iface eno1 inet6 auto

重启网络

sudo /etc/init.d/networking restart
### 配置静态 IP 地址 对于 Ubuntu 16.04 LTS 来说,在 `/etc/network/interfaces` 文件中配置静态 IP 是一种常见的方式。由于该版本尚未采用 netplan 方式,因此可以在上述文件内直接编辑来实现目的[^1]。 #### 查看网卡信息 为了正确设置静态 IP,首先要确认系统的网卡名称以及当前使用的 DHCP 或者其他网络配置情况。可以利用 `ifconfig` 或者更推荐的命令 `ip a` 来获取这些信息: ```bash ip a ``` 这一步骤有助于识别出要分配静态 IP 的具体接口名(例如 eth0, enp2s0 等)。之后就可以准备修改配置文件了[^2]。 #### 编辑网络接口配置文件 打开终端并切换到 root 用户权限后,使用文本编辑器如 nano 打开 `/etc/network/interfaces` 文件: ```bash sudo nano /etc/network/interfaces ``` 找到对应网卡的相关条目,并按照如下格式添加或更改成所需的静态 IP 设置: ```plaintext auto enp2s0 iface enp2s0 inet static address 192.168.1.100 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 ``` 请注意替换其中的 `enp2s0`, `address`, `gateway` 和 DNS 服务器地址为实际环境中适用的信息[^3]。 完成以上操作后保存退出nano编辑器(Ctrl+X),然后重启计算机使新的配置生效,或者通过命令行立即应用新配置而不必重新启动整个系统: ```bash sudo systemctl restart networking.service # 或者 sudo service networking restart ``` 最后可以通过运行 `ifconfig` 或 `ip addr show` 来验证是否成功设置了静态 IP[^4]。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值