(STL之父)An Interview with A. Stepanov

【能源系统优化】基于NSGA-II的储能容量配置模型:多目标优化与全寿命周期成本分析 项目介绍 MATLAB 储能容量配多大?NSGA-II优化与寿命成本情景分析 内容概要:本文介绍了一个基于MATLAB的储能容量配置优化项目,通过NSGA-II多目标优化算法,综合考虑储能系统的全寿命周期成本、供电可靠性与新能源消纳能力,构建了包含数据生成、储能运行仿真、寿命衰减建模、多目标优化与决策分析的一体化模型框架。项目生成50000条多维随机数据,涵盖负荷、新能源出力、电价、温度与电池运行压力,并建立储能能量容量、功率与备用SOC的协同配置模型。通过时序仿真计算充放电行为、等效循环次数与容量衰减,结合初始投资、运行收益、更换成本与惩罚项,构建全生命周期经济评价体系。NSGA-II算法用于求解成本、供电可靠性与碳排放之间的Pareto最优前沿,支持多情景对比分析,如电价波动、负荷增长与寿命衰减加剧等,最终输出推荐配置与可视化结果,为储能工程选型提供量化依据。; 适合人群:具备一定MATLAB编程基础,从事电力系统规划、储能系统设计、新能源集成或优化算法研究的科研人员与工程技术人员,尤其适用于研究生、能源领域研发工程师及项目规划人员。; 使用场景及目标:①解决“储能容量配多大”这一实际工程问题,优化容量与功率的协同配置;②评估不同电价、负荷、气候与政策情景下储能方案的经济性与鲁棒性;③分析寿命衰减对长期成本的影响,避免“低投入高维护”的不合理配置;④为新能源电站、微电网、工业园区等场景的储能规划提供Pareto最优解集与决策支持。; 阅读建议:此资源侧重于模型构建与算法实现,建议读者结合提供的代码示例深入理解NSGA-II在储能优化中的应用,重点关注目标函数设计、寿命成本建模与多情景分析逻辑。建议运行数据生成与优化代码,调试并可视化结果,以掌握从数据到决策的完整流程。 立即下载

Question:
May you introduce yourself?

Answer:
I was born in Moscow, USSR, on November 16, 1950, and studied Mathematics at the Moscow State University. But I never became a mathematician. I could not really get excited about Tamagawa numbers, Coxeter groups and other things that I was supposed to specialize in. Hardy's hope that his mathematics is never going to be applied is not for me. I need to do something a little bit more real. I was fortunate, however, to see some great mathematicians at work and became totally immune to a pseudo-mathematical rigor that unfortunately is so common in Computer Science. So becoming a programmer was a really good thing for me. In 1972 I became a member of a team developing a new minicomputer to be used to control large hydroelectric power stations. I participated in all parts of the design, from architecture and hardware testing to OS (my first published paper was on real-time operating systems) and programming tools. I learned first hand about both software reliability - power stations are hard to reboot - and efficiency - the water is coming down in real time.

 

At that time I also discovered books of two great computer scientists from whose work I learned the scientific foundation of my trade: Donald Knuth and Edsger Dijkstra. Knuth taught me the answers. Dijkstra taught me the questions. Time and time again I come back to their works for new insights. My next important career step was spending 5 years at the Computer Science Branch of General Electric Research Center in Schenectady, NY. I worked on a very high level language called Tecton and read a lot: from a plethora of papers on programming language design to Logical Summa of William of Occam - Aristotle and medieval logicians knew a lot about different kinds of logical structures that appear in the natural languages and their formal properties. At that time I started a fruitful research collaboration with Dave Musser which is still going on. In 1984 I became an assistant professor at Polytechnic University in Brooklyn, NY. Teaching Computer Science did me a lot of good - I managed to teach all kinds of graduate courses, learning a lot of new material in the process. I also developed a large library of algorithms and data structures in Scheme. This work led to a development (together with Dave Musser) of Ada Generic Library. After a brief stint at Bell Labs, where I worked on a library of algorithms in C++, I moved to HP Labs in Palo Alto (1988). I spent the next 4 years working on storage systems: I had to learn how to program disk controllers. In 1993 I was given a brief opportunity to return to my research on generic programming. STL is a result of this. In 1995 I moved on to Silicon Graphics, where I have been trying to establish a group to work on further development of STL.


Question:
You mentioned William of Occam. William of Occam used to say "Entia non sunt multiplicanda" - I could translate that as "[abstract] objects are unnecessary". It seems that you have applied the razor of Occam to OOP. Starting from algorithms rather than from objects kinds of reminds me the medieval quarrel on universals. Is it right?

Answer:
It is a pretty analogy, but I do not think it is right. I never thought of OO as related to a realist philosophy and I am not a nominalist at all. As a matter of fact, the Franciscan school: Alexander of Hales, Bonaventure and Scotus are much closer to Augustinian/Platonist tradition. Occam was a strange fellow anyways. As the editor of his Opera Omnia Gideon Gal used to say: "But the fellow was really mad!"

Question:
For most Italian readers, the name "Stepanov" goes in pair with STL. Does STL mean Standard Template Library or Stepanov and Lee? And what was the role of D.Musser and A.Koenig in STL history?

Answer:
Well, it does really mean Standard Template Library. I did make a joke in my interview with Dr. Dobb's journal about STL standing for "Stepanov and Lee," but it was a joke. I have been collaborating with Dave Musser for almost 20 years. Our collaboration has been so close that it is difficult to say who contributed what. His is not on the list of the official STL authors only because in the short period of time when the proposal for the standard had to been written, he was busy doing something else. Andy Koenig is responsible for explaining to me the structure of the abstract C machine. STL, in a sense, is an application of generic programming techniques that Dave Musser and I have been developing to a C machine model. If it were not for Andy, I would be still dealing with boxed, heap-allocated objects and pining for garbage collection. And, of course, Andy and Bjarne Stroustrup are responsible for putting STL into the standard. Meng Lee was a perfect collaborator at the stage when it was necessary to move from beautiful ideas to a complete implementation. She kept me focused - I tend to lose interest after the problem is solved - if I know the solution, why bother making it known to the rest of the world. She was putting grueling hours into the code and the document. In a sense, she was the only person who believed that something practical could come out of the stuff; I think, that at that point both Dave Musser and I actually lost hope that we could explain to anybody what we had been doing for quite a while.

Question:
What is the origin of STL? Has STL been conceived to be what it is now, that is "the" C++ Standard Library, or does it come from some other project? Could you tell us a history of STL?

Answer:
In 1976, still back in the USSR, I got a very serious case of food poisoning from eating raw fish. While in the hospital, in the state of delirium, I suddenly realized that the ability to add numbers in parallel depends on the fact that addition is associative. (So, putting it simply, STL is the result of a bacterial infection.) In other words, I realized that a parallel reduction algorithm is associated with a semigroup structure type. That is the fundamental point: algorithms are defined on algebraic structures. It took me another couple of years to realize that you have to extend the notion of structure by adding complexity requirements to regular axioms. And than it took 15 years to make it work. (I am still not sure that I have been successful in getting the point across to anybody outside the small circle of my friends.) I believe that iterator theories are as central to Computer Science as theories of rings or Banach spaces are central to Mathematics. Every time I would look at an algorithm I would try to find a structure on which it is defined. So what I wanted to do was to describe algorithms generically. That's what I like to do. I can spend a month working on a well known algorithm trying to find its generic representation. So far, I have been singularly unsuccessful in explaining to people that this is an important activity. But, somehow, the result of the activity - STL - became quite successful.

Question:
I used to think at complexity requirements in STL as mere constraints on the efficiency of the implementation. You seem to imply that complexity is a true functional requirement. Is it so?

Answer:
You select different algorithms depending on complexity of the fundamental operations provided by the data structure. Disk and tape are functionally equivalent as SCSI storage devices, but woe to the software designer who would attempt to use the tape as if it were a disk. In terms of STL - you can always implement p + n for forward iterators, so why bother providing random access iterators?

Question:
What about Generic Programming? I only found some columns by A.Koenig in JOOP on "generic programming". Generic programming is definitively absent in most C++ programming books, including Coplien, Meyer, Stroustrup, Lippman and so on. I think STL could be described as "Programming C++ the way you would never thought possible". Do you agree?

Answer:
STL, at least for me, represents the only way programming is possible. It is, indeed, quite different from C++ programming as it was presented and still is presented in most textbooks. But, you see, I was not trying to program in C++, I was trying to find the right way to deal with software. I have been searching for a language in which I could express what I wanted to say for a long time. In other words, I know what I want to say. I can say it in C++, I can say it in Ada, I can say it in Scheme. I adapt myself to the language, but the essence of what I am trying to say is language independent. So far, C++ is the best language I've discovered to say what I want to say. It is not the ideal medium, but I can do more in it than in any other language I tried. It is actually my hope that someday there will be a language designed specifically with generic programming in mind.

Question:
Could you explain to a modest C++ programmer what Generic Programming is, what is the relation of Generic Programming with C++ and STL, and how did you come to use Generic Programming in a C++ context?

Answer:
Generic programming is a programming method that is based in finding the most abstract representations of efficient algorithms. That is, you start with an algorithm and find the most general set of requirements that allows it to perform and to perform efficiently. The amazing thing is that many different algorithms need the same set of requirements and there are multiple implementations of these requirements. The analogous fact in mathematics is that many different theorems depend on the same set of axioms and there are many different models of the same axioms. Abstraction works! Generic programming assumes that there are some fundamental laws that govern the behavior of software components and that it is possible to design interoperable modules based on these laws. It is also possible to use the laws to guide our software design. STL is an example of generic programming. C++ is a language in which I was able to produce a convincing example.

Question:
I think STL and Generic Programming mark a definite departure from the common C++ programming style, which I find is almost completely derived from SmallTalk. Do you agree?

Answer:
Yes. STL is not object oriented. I think that object orientedness is almost as much of a hoax as Artificial Intelligence. I have yet to see an interesting piece of code that comes from these OO people. In a sense, I am unfair to AI: I learned a lot of stuff from the MIT AI Lab crowd, they have done some really fundamental work: Bill Gosper's Hakmem is one of the best things for a programmer to read. AI might not have had a serious foundation, but it produced Gosper and Stallman (Emacs), Moses (Macsyma) and Sussman (Scheme, together with Guy Steele). I find OOP technically unsound. It attempts to decompose the world in terms of interfaces that vary on a single type. To deal with the real problems you need multisorted algebras - families of interfaces that span multiple types. I find OOP philosophically unsound. It claims that everything is an object. Even if it is true it is not very interesting - saying that everything is an object is saying nothing at all. I find OOP methodologically wrong. It starts with classes. It is as if mathematicians would start with axioms. You do not start with axioms - you start with proofs. Only when you have found a bunch of related proofs, can you come up with axioms. You end with axioms. The same thing is true in programming: you have to start with interesting algorithms. Only when you understand them well, can you come up with an interface that will let them work.

Question:
Can I summarize your thinking as "find the [generic] data structure inside an algorithm" instead of "find the [virtual] algorithms inside an object"?

Answer:
Yes. Always start with algorithms.

Question:
This mean a radical change of mind from both imperative and OO thinking. What are the benefits, and the drawbacks, of this paradigm compared to the "standard" OO programming of SmallTalk or, say, Java?

Answer:
My approach works, theirs does not work. Try to implement a simple thing in the object oriented way, say, max. I do not know how it can be done. Using generic programming I can write: template <class StrictWeakOrdered> inline StrictWeakOrdered& max(StrictWeakOrdered& x, StrictWeakOrdered& y) { return x < y ? y : x; } and template <class StrictWeakOrdered> inline const StrictWeakOrdered& max(const StrictWeakOrdered& x, const StrictWeakOrdered& y) { return x < y ? y : x; }

 

(you do need both & and const &). And then I define what strict weak ordered means. Try doing it in Java. You can't write a generic max() in Java that takes two arguments of some type and has a return value of that same type. Inheritance and interfaces don't help. And if they cannot implement max or swap or linear search, what chances do they have to implement really complex stuff? These are my litmus tests: if a language allows me to implement max and swap and linear search generically - then it has some potential.


Question:
Java is a very new language, still it lacks templates, so it prevents using Generic Programming. Everything must be a class. What do you think of Java?

Answer:
I spent several months programming in Java. Contrary to its authors prediction, it did not grow on me. I did not find any new insights - for the first time in my life programming in a new language did not bring me new insights. It keeps all the stuff that I never use in C++ - inheritance, virtuals - OO gook - and removes the stuff that I find useful. It might be successful - after all, MS DOS was - and it might be a profitable thing for all your readers to learn Java, but it has no intellectual value whatsoever. Look at their implementation of hash tables. Look at the sorting routines that come with their "cool" sorting applet. Try to use AWT. The best way to judge a language is to look at the code written by its proponents. "Radix enim omnium malorum est cupiditas" - and Java is clearly an example of a money oriented programming (MOP). As the chief proponent of Java at SGI told me: "Alex, you have to go where the money is." But I do not particularly want to go where the money is - it usually does not smell nice there.

Question:
Do you think template-based programming and Generic Programming will be adopted by the majority of C++ programmers, or will they be confined to STL, somewhat like manipulators, which were never used outside the iostream library?

Answer:
I do not know. It will take a long time before the ideas behind STL enter the mainstream. We will know in about 10-15 years if anything comes out of all this.

Question:
One thing has always amazed me, is how quickly STL was adopted by the C++ standardization committees. I mean, these committees are known to be very cautious and conservative. How do you explain that?

Answer:
The support of Bjarne Stroustrup was crucial. Bjarne really wanted STL in the standard and if Bjarne wants something, he gets it. He is as stubborn as a mule. He even forced me to make changes in STL that I would never make for anybody else - I am also stubborn, but he is the most single minded person I know. He gets things done. It took him a while to understand what STL was all about, but when he did, he was prepared to push it through. He also contributed to STL by standing up for the view that more than one way of programming was valid - against no end of flak and hype for more than a decade, and pursuing a combination of flexibility, efficiency, overloading, and type-safety in templates that made STL possible. I would like to state quite clearly that Bjarne is the preeminent language designer of my generation.

Question:
STL is full of creative uses of templates, such as symbolic types exported from classes, or the pattern matching of a set of overloaded algorithms onto iterator tags. Surely enough, no standard C++ Programming book speaks about those idioms. How did you come to these C++ code idioms?

Answer:
I knew exactly what I was trying to accomplish. So I tweaked the language until I was able to get by. But it took me many years to discover all the techniques. And I had many false starts. For example, I spent years trying to find some use for inheritance and virtuals, before I understood why that mechanism was fundamentally flawed and should not be used. I am very happy that nobody could see all the intermediate steps - most of them were very silly. It takes me years to come up with anything half decent. It also helped that Bjarne was willing to put certain features in the language just to enable some of my idioms. He once refered to it as "just in time language design."

Question:
What do you think is the best way to teach Generic Programming and STL to C++ programmers? Do you think inheritance and other OO techniques should be learnt before, after or at the same time as STL?

Answer:
I plan to teach a course on Generic Programming at SGI. I do hope that it will lead to a book, but I am a notoriously lazy writer - I never finish papers unless I have a collaborator who does.

Question:
I have done a search on Lycos for your papers and I only found two titles: the STL manual and a resume of you presentation of STL to the standardization committee.

Answer:
Well, I am lazy, but not that lazy. I probably published 20 papers and a book. Many of them are on different STL sites. (Dave Musser's site probably has several.)

Question:
Which book?

Answer:
The book is "The Ada Generic Library: Linear List Processing Packages", by David R. Musser and Alexander A. Stepanov, Compass Series, Springer-Verlag, 1989. It is not really worth reading.

Question:
STL pushes C++ compilers to their limits. Contemporary C++ compilers are still unable to correctly compile some STL code. How could you develop and test STL?

Answer:
I do have a lot of gray hair as a result of trying to compile STL. The unfortunate reality is that a lot of code in the present implementation of STL is suboptimal because of the compiler limitations and bugs of the compilers I had to use when I was developing STL. Fortunately, I had help from Bjarne in figuring out what certain unimplemented features are supposed to do. It does help a lot if you can ask the language designer what a given construct really does.

Question:
How did allocators come into STL? What do you think of them?

Answer:
I invented allocators to deal with Intel's memory architecture. They are not such a bad ideas in theory - having a layer that encapsulates all memory stuff: pointers, references, ptrdiff_t, size_t. Unfortunately they cannot work in practice. For example, vector<int, alloc1> a(...); vector<int, alloc2> b(...);

 

you cannot now say: find(a.begin(), a.end(), b[1]);

 

b[1] returns a alloc2::reference and not int&. It could be a type mismatch. It is necessary to change the way that the core language deals with references to make allocators really useful.


Question:
Could this point out a serious drawback of C++ templates? I can customize a class using a template argument, but different specializations are not type compatible. Instead, different subclasses (in OO sense) of a class are type compatible with the root class.

Answer:
I think that the problem is deeper than that. T* is hardwired into the language. In general, I believe that it is necessary to design a programming language from the ground up to enable generic programming in a consistent way. I wish that somebody would hire me to do just that.

Question:
I find two hash table implementations in the D.Musser site, and they were both working and quite smart - much smarter than hash tables commonly found in class libraries. Why were hash tables not included into STL?

Answer:
Politics. They have to be in. Our new implementation of STL does contain them. In general, we need to develop a mechanism for adding things to STL. After all, STL is an extensible framework, it begs to be extended. There are many data structures that are missing, for example, singly linked lists, matrices, and graphs. SGI is willing to lead the way in extending STL.

Question:
Are you still working on STL? Doing what?

Answer:
My group at SGI, - Matt Austern, Hans Boehm and myself, - just finished a new version of STL. It includes hash containers, thread safe memory allocation and spectacular web documentation. SGI released it into the public domain (http://www.sgi.com/Technology/STL). We hope that we will be able to keep STL growing. Multidimensional data structures, persistence, multithreading are among the things that we plan do add. Well, it is not clear how long we can keep doing this stuff. There are no support from my management for any of the STL/generic programming activities. It is very hard to explain to them why SGI should pay for extensions. (It was equaly hard to explain it to HP management. They canceled my project 5 months after STL was accepted into the standard.)

Question:
It seems that STL has still some drawbacks. First, HP STL is not thread safe. Then, templates cause a lot of code to be put into header files. You cannot have true template libraries, nor DLLs or shared libraries of (uninstantiated) templates: STL is mostly a compile- time library. The last drawback is that almost no CASE tool and no OOD methodology effectively supports Generic Programming. For instance, no CASE tool lets you define generic functions. Also, only the Booch notation is somewhat able to express templates, but resulting diagrams are not intuitive (to me, at least).

Answer:
SGI STL is thread safe. The acceptance of separate compilation into the standard - designed by my SGI collegues John Wilkinson, Jim Dehnert and Matt Austern solves your second problem. It was voted into the standard, but it will take a while before there are compilers that can do separate compilation. I do believe that separate compilation would eventually require shipping shared libraries of templates. That was the main reason I initiated SGI work on separate compilation. It is not that difficult to design tools that will deal with Generic Programming. And I am quite sure that if there is some market for it, Grady Booch will change his notation to handle generic programming.

Question:
One painful thing for the C++ programmer is that standardization committees seem to be unaware of each other. OMG has just defined a standard for distributed programming (CORBA), but the mapping of CORBA to C++ is unaware of STL. They define their own set of classes, such as Sequence<T> and CORBA::String. The same problem arises for ODMG and its ODMG-93 standard for Object Databases. Why does this happen? Are things going to change?

Answer:
I am old enough to remember all the networking standards that were coming out in the seventies. Who remembers them now?

Question:
What could Generic Programming be in a distributed environment? Generic Programming is based on the idea that the compiler "knows" all possible types at compile time. This is not realistic in a distributed environment. Should we think at a kind of ORB integrated with a compiler? Or is Generic Programming simply not suited to Distributed Programming - in that case, Java would be right?

Answer:
Generic Programming has nothing to do with run time vs. compile time. The problem that I find with OOP is not just that it is slow, but that it does not allow me to express simplest possible algorithms. Again, the signature of max is: max: T x T -> T

 

It is not expressible in Java, because the inheritance from some class or interface T changes it into: max: T' x T -> T

 

You need covariant signature transformation and an ability to obtain types from types, a notion of a virtual type if you like, a v-table containing type descriptors.


Question:
What is an iterator?

Answer:
An iterator is a union of two theories. The first theory is a theory of name (handle, cookie, address). A name is something that points to something else. (operator*). We call it Trivial Iterator theory in our site. In addition to the dereferencing, it has equality defined that satisfies the following axiom: i == j iff &*i == &*j

 

That is, two iterators are equal if and only if they point to the same object. (Equality, of course, needs to satisfy all the standard axioms.) The second theory is the theory of successor operation (++i) with its refinements: successor - predcessor (++ and --) and addition (++, --, + and -) with the standard axioms. And, of course, pointer is just a model of random access iterator.


Question:
Some argue that a pointer is a way to hack any conceivable horrible and weird thing into memory. Java and Delphi made it right when they disallowed pointers.

Answer:
Disallowing pointers that allow you to do pointer arithmetic is a good thing. Pointer arithmetic should be allowed only where it is really allowed in C and C++, namely, for pointers into arrays. But disallowing pointers in general is a very silly thing. You cannot get generic swap unless you have pointers or references in the language.

Question:
"category" is an overloaded word in the C++ community. How do you call iterator categories?

Answer:
I often call these things concepts.

Question:
I have tried to develop a STL-like singly linked list. But I chose not to implement the size() member function, because I did not want the overhead of keeping a counter just to implement size() in a constant time, as stated by the C++ CD. Was it the right decision?

Answer:
size() used to be linear time in case of STL lists. It was the right decision since if a user wants to keep a count it is easy to do, but usually you do not need it and it makes splice linear time (it used to be constant). But the standard committee insisted that I change it to constant time. I had no choice. We will have to change this requirement eventually.

Question:
I am studying how to express a tree into STL and I have some problems: every node has one father but two sons. Moving to the father could be represented as operator--, but I would need two different operator++ to move to the sons. How can iterators deal with not linear structures, such as trees o graphs?

Answer:
Even on a sequence you have different iterators. Reverse iterators are just one example. Stride iterators are very important and will have to be put into STL eventually.

Question:
I must confess my ignorance. What are stride iterators?

Answer:
Go from i to i+5 to i+10.

Question:
What's the difference with random iterators?

Answer:
Stride iterator is an iterator adaptor that takes a random access iterator range and provides a (random access iterator) such that ++ on it goes through a stride (a sequence of iterator n steps apart).

Question:
How does this relate with the problem of traversing a tree?

Answer:
I did not mean to say that stride iterators or reverse iterators have anything to do with tree traversal, but that there could be multiple iterator types on a data structure for different iteration orders - in case of trees pre, in and post order traversals.

Question:
A frequent dilemma for me was: should I design this function as a member function or as a generic (global) function? what has been the rationale of this decision in STL?

Answer:
Make it global if it at all possible. It would be much nicer if begin and end were global - it would allow us to define them for C arrays. It would be so much nicer if operator* was global with the default definitions: template <class T> T& operator*(T& x) { return x;} template <class T> const T& operator*(const T& x) { return x;}

 

It would allow us to write: copy(0, 25, ostream_iterator<int>("/n"));

 

In general, for non-iterator objects operator* should return the object itself, the "meaning" of a non-naming thing is a thing itself. I would even love to write constructors and destructors as global functions. You could do some amazing stuff if this is allowed in the language.


Question:
If I define a generic operator* your way, and in my program I define: template <class T> class SmartPtr { T* ptr; public: SmartPtr(T* _ptr = 0) : ptr(_ptr){} T* operator*() const {return ptr;} // ... };

 

than shouldn't I get ambiguity in this code: int i=0; SmartPtr<int> sp(&i); int j= *i; // apply SmartPtr<int>::operator* or // operator<SmartPtr<int>? both are user defined


Answer:
No, you do not. Your definition matches better (the unification is deeper) than the global one. That is what partial specialization is all about.

Question:
Now, a bunch of curiosities of mine: why does not STL have something like a "sorted container" adaptor?

Answer:
Set is a sorted container.

Question:
Set is not an adaptor. Why was it possible to write a heap, but not a sorted container, out of any container supporting random access iterators?

Answer:
Remember that it was very hard to push through STL because of its size. I had to throw away dosens of useful components. (Think what happened to hash tables.)

Question:
Why is the function __adjust_heap in <heap.h> not documented ? This function is necessary to use the heap in the Dijkstra algorithm.

Answer:
I had great difficulty pushing heap functions into the standard. Originally, I wanted all auxiliary functions in STL to be visible, but it was not politically possible.

Question:
It is hard for me to figure something political about a heap functions.

Answer:
It was not any particular function, but the number of them. Bjarne is personally responsible for reducing the number of components in STL by a factor of two. He was trying to make it as small as possible to placate the opposition.

Question:
Have your ever been in Italy, for business or for pleasure?

Answer:
Yes, I spent 10 days in Pisa, visited Florence and Lucca. I dream of going to Assisi - I am a Franciscan at heart. I cry during the second act of Tosca and the third act of La Traviata. I keep Dante (in Italian!) on my bed stand. I love pasta, prosciutto and Chianti, - while I am a traditionalist, I look much more like John XXIII than Pius XII.

Question:
You must know Italian very well if you can read Dante in its original version: very few Italians could!

Answer:
Well, my Italian is very poor. The way I do read Dante in Italian is by having an English translation in front of me. I read a stanza aloud in Italian and then read the translation.

Graziano: Thank you very much, Alex. I hope you will be able to come to Italy and see Assisi soon, reading Dante in the old town of Assisi - maybe the most charming medieval town in Italy .
Graziano Lo Russo has a degree in Electronic Engineering from the Politecnico of Turin (Italy) and is a specialist in object orientated techniques. He is a contributing editor to many Italian programming magazines. He can be reached at lorusso@infomedia.it.

印尼稻米收成与粮食安全数据集2026年 本数据集收录印度尼西亚2026年水稻收成与粮食安全遥测数据,包含10000条稻米农业收成产量与粮食安全监测记录,围绕印尼国家粮食安全体系中的核心作物水稻展开。稻米是印尼逾两亿人口的主粮,其收成波动直接影响国家粮食安全与进口政策,本数据集将种植区域、收成产量、气候与土壤相关遥测指标整合为结构化表格,可支撑粮食产量预测、收成影响因素分析、区域粮食安全评估与农业政策模拟等研究任务。典型应用场景包括:农业时间序列产量预测模型构建、气候因子与水稻收成的关联分析、省份与地区层面的粮食自给率测算、粮食安全风险预警指标设计,也可作为农业经济、粮食政策与数据科学交叉课程的教学素材。数据为2026年最新版,规模约1.2MB、单CSV结构规整,字段命名清晰,适合Python、Pandas、Scikit-learn等主流工具链直接使用,便于开展探索性分析、可视化与机器学习全流程练习。重要说明:本数据为遥测整理数据,分析结论以数据集文档口径为准,农业决策请结合官方统计综合研判。许可:CC0公有领域,可自由使用与二次分发。 立即下载

相关推荐

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

四分之一汽车模型主动悬架设计:在MATLAB_Simulink中实现比例积分控制、前馈扰动抑制和扰动估计,以优化乘坐舒适性和道路附着力。.rar

An Interview with A. Stepanov

  An Interview with A. Stepanov by Graziano Lo RussoEdizioni Infomedia srl Question:May you

Kay's Blog 2487

Delphi 13.2控件之msquic4d.rar

Delphi 13.2控件之msquic4d.rar

MCGS的Http协议驱动,支持http协议

硬件配置 参数设置 设备属性 设备命令 通讯状态 附录 #HTTP 1、 设备简介 驱动类型 该驱动为独立设备,直接添加构件即可,不需要挂载到父设备下 通讯协议 采用标准HTTP1.1协议 通讯方式 驱动构件为客户端。 2、 硬件连接 本软件在通讯之前,请保证通讯连接正确。通讯连接方式:采用标准的RJ45接口的以太网接线(对调网线或使用HUB交换)。 3、 设备通讯参数 本设备为独立设备,无父设备参数 4、 设备构件参数设置 “HTTP设备”参数设置如下: <1> 内部属性: 构建url信息。 <2> 最小采集周期:本软件对设备进行操作的时间周期,单位为ms,默认为100ms。 <3> 通讯等待时间:通讯数据接收等待时间,默认设置为200ms,当采集速度要求较高或数据量较大时,设置值可适当减小或增大。 <4> HttpHead:http head添加需要的字段,不需要添加http head时值为空,默认不添加。 5、 设备命令 本设备构件提供设备命令,用于进行相应的操作,设备命令的格式如下: 设备命令 命令介绍 GetHttpHead 格式1 GetHttpHead(headStr) 用途 获取http head参数 参数 headStr 参数可以为字符型变量、字符串常量 例1 !SetDevice(设备0,6,"GetHttpHead(headStr)") 获取http head数据保存到headStr中 SetHttpHead 格式1 SetHttpHead(headStr) 用途 设置http head参数 参数 headStr 参数可以为字符型变量、字符串常量

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

企业数字化转型AI大模型赋能智能体平台及AI场景应用规划方案(生态合作版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

智慧环保生态保护行业可信数据空间应用规划方案(技术方案版).pptx

【DBO三维路径规划】基于多策略改进的蜣螂算法MSDBO多无人机协同集群避障路径规划(目标函数:最低成本:路径、高度、威胁、转角)研究(Matlab代码实现)

内容概要:本文研究了基于多策略改进的蜣螂优化算法(MSDBO)在多无人机协同集群三维路径规划中的应用,旨在解决复杂三维环境下的避障与最优路径搜索问题。通过构建包含路径长度、飞行高度、威胁规避和转弯角度的综合成本目标函数,利用MSDBO算法对多无人机系统的飞行轨迹进行全局优化,实现在保证安全性与稳定性的前提下达到最低能耗与最优性能的目标。文中详细阐述了算法的多策略改进机制、三维环境建模方法以及多无人机协同避障策略,并通过Matlab仿真平台验证了该方法相较于传统优化算法在收敛速度、路径质量和鲁棒性方面的优越性能。; 适合人群:具备一定优化算法理论基础和无人机控制系统知识的科研人员及研究生,特别适用于从事智能优化算法、多智能体协同控制、路径规划与自主导航等相关领域的研究人员和技术开发者。; 使用场景及目标:①应用于灾害救援、军事侦察、智能巡检等复杂三维场景中多无人机协同任务的路径规划;②为多目标约束下的路径优化、动态避障与能耗平衡问题提供高效的算法支持与仿真验证工具;③推动智能优化算法在无人系统自主决策与协同控制中的实际应用与工程落地。; 阅读建议:建议读者结合提供的Matlab代码深入理解算法的具体实现过程,重点关注目标函数设计、多策略改进机制(如种群初始化、自适应参数调整、局部搜索增强等)及仿真结果分析部分,同时可尝试将该算法迁移至其他智能优化算法框架中进行对比研究,以深化对路径规划问题本质的理解与实践能力的提升。

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

气象服务行业可信数据空间应用规划方案(技术方案版).pptx

【CEEMDAN-VMD-GRU】完备集合经验模态分解-变分模态分解-门控循环单元预测研究(Python代码实现)

内容概要:本文提出了一种融合完备集合经验模态分解(CEEMDAN)、变分模态分解(VMD)与门控循环单元(GRU)的复合预测模型,旨在提升对复杂非平稳时间序列的预测精度。首先利用CEEMDAN对原始信号进行自适应分解,有效缓解模态混叠问题,获得一组本征模态函数(IMFs);随后引入VMD对关键模态分量作进一步优化分解,增强特征分离能力,降低噪声干扰;最后将处理后的平滑分量分别输入GRU神经网络进行独立训练与预测,并通过加权集成策略融合各分量输出,得到最终高精度预测结果。该方法结合了多尺度信号分解与深度学习的优势,显著提升了模型在处理强噪声、非线性、非平稳序列(如电力负荷、风速、光伏发电功率等)时的泛化能力和预测稳定性,文中提供了完整的Python代码实现,便于复现与应用。; 适合人群:具备一定Python编程基础和机器学习理论知识,从事科研或工程应用的硕士、博士研究生及科研人员,尤其适用于能源系统预测、智能电网调度、可再生能源管理、信号处理与时间序列分析等相关领域的研究人员和技术开发者。; 使用场景及目标:①解决传统单一预测模型在面对复杂非平稳时间序列时存在的过拟合、收敛慢、精度低等问题;②通过多阶段信号分解降低原始序列的复杂度与不确定性,提升GRU模型的训练效率与预测鲁棒性;③为电力系统负荷预测、新能源出力预报、设备运行状态预警及市场交易策略制定等关键任务提供高精度数据支撑。; 阅读建议:建议读者结合提供的Python代码逐模块理解算法实现流程,重点关注CEEMDAN与VMD的参数配置对信号分解效果的影响,尝试在不同数据集上进行实验对比,并通过可视化手段分析各模态分量的物理意义,进一步掌握模型调优与性能评估的方法。

机器视觉检测实战教程 19页成品课程光源选型Halcon标定海康相机VisionPro

内容概要:机器视觉检测实战教程,19页6章成品课程PDF:视觉检测光源选型对照表+五个翻车案例、Halcon模板匹配create_shape_model七参数整定、视觉标定三类(9点/旋转/手眼)、海康工业相机C#取图黑图丢帧排坑、VisionPro QuickBuild部署License迁移C#宿主、远心镜头选型。含C#/Halcon代码与现场案例。适用人群:机器视觉工程师、自动化检测开发、企业内训。使用场景:视觉方案设计、选型、标定部署、团队培训。原创整理。

【医疗器械制造】基于酸碱腐蚀环境的一次性乳胶手套铝合金手模失效机理分析与量产风险控制

内容概要:本文围绕一次性医用乳胶手套生产中使用的铝合金手模在酸碱环境下的失效风险展开系统性分析,重点探讨其在外表面腐蚀、清洗循环、氯介质侵入及表面粗糙度控制等方面的工程挑战。研究表明,尽管市场上已有带涂层的铝合金手模供应,但其能否在强碱、酸洗、毛刷摩擦、冷热交变和氯共存的复杂工况下长期维持Ra 1.0—2.5 μm的表面质量并实现稳定脱模,仍需经过严格的多阶段验证。常规阳极氧化+PTFE涂层方案已被实测排除,而316L不锈钢筒体在湿氯环境中出现的三个月内腐蚀失效案例提示必须重视内腔隔离设计。文章强调,采购决策应基于“小批量试制—离线加速试验—影子生产验证—条件性放行”的四阶段准入机制,结合表面参数、工艺相容性、手套成品性能与全生命周期成本进行综合评估,避免依赖供应商宣传数据。; 适合人群:从事医疗器械制造、材料工程、设备采购与工艺质量管理的技术人员及决策管理者,尤其是涉及乳胶手套生产线优化与手模选型的相关从业人员。; 使用场景及目标:①评估铝合金手模替代陶瓷手模的技术可行性与风险边界;②建立手模选型的系统验证流程,防范因表面失效导致的脱模异常、手套缺陷与非计划停机;③指导采购合同中技术条款的制定,确保供应商交付具备可验证数据支撑; 阅读建议:此资源以工程实证为导向,建议读者结合自身产线工艺参数,重点关注外表面Ra控制、内腔双密封设计、影子生产验证方法及失效链追溯体系的构建,在试制阶段严格执行多维度联合判定标准,审慎推进规模化替代。

无人机路径规划中多种优化算法的仿真研究(Matlab代码实现)

内容概要:本文围绕无人机三维路径规划问题,系统研究了多种智能优化算法在复杂环境下的仿真应用与性能对比,重点实现了改进灰狼优化算法(I-GWO)、标准灰狼优化算法(GWO)、金鹰优化算法(GJO)和正弦余弦算法(SCA)的Matlab代码实现。通过构建包含路径长度、飞行高度、威胁规避及转弯角度等多维度目标函数的综合评价体系,对各算法在单无人机路径优化与多无人机协同集群避障场景中的表现进行全面仿真分析,评估其路径规划能力、收敛速度与鲁棒性。研究旨在实现最低综合成本的飞行路径,并为多智能体协同任务提供可靠的算法支撑。; 适合人群:具备一定Matlab编程基础,从事无人机系统设计、智能优化算法研究、路径规划及相关自动化、人工智能领域的科研人员、工程技术人员及研究生。; 使用场景及目标:① 掌握主流智能优化算法在三维空间路径规划中的具体建模与实现方法;② 对比分析不同算法在路径优化质量、计算效率、避障能力和多目标权衡方面的性能差异;③ 为多无人机协同执行侦察、监测、救援等任务提供高效的路径规划解决方案与仿真验证平台。; 阅读建议:建议结合文中提供的Matlab代码进行动手实践,重点关注算法参数调优、目标函数设计以及环境障碍物建模对最终路径的影响,可进一步扩展至动态障碍环境或加入通信约束以适应更复杂的实际应用场景。

【新能源电力系统】项目介绍 MATLAB实现基于GWO-VMD-SSA-LSTM灰狼优化算法(GWO)结合变分模态分解(VMD)、麻雀搜索算法(SSA)及长短期记忆网络(LSTM)进行辐照度-温度驱动

内容概要:本文提出了一种融合灰狼优化算法(GWO)、变分模态分解(VMD)、麻雀搜索算法(SSA)和长短期记忆网络(LSTM)的复合模型(GWO-VMD-SSA-LSTM),用于实现高精度的辐照度-温度驱动短期光伏功率预测。该模型首先通过GWO优化VMD的关键参数(模态数K和惩罚因子α),实现对非平稳光伏功率序列的高效多尺度分解,降低信号复杂性;随后利用SSA对LSTM的超参数(如隐藏层单元数、Dropout率、学习率等)进行智能寻优,提升网络训练效率与泛化能力;最后通过独立LSTM网络对各VMD模态进行预测并重构输出。模型结合了信号分解、智能优化与深度学习优势,显著提升了在多云、阴雨等复杂天气下的预测精度与稳定性,并通过MAE、RMSE、MAPE和R²等指标验证了有效性。文中还提供了完整的MATLAB实现流程,涵盖数据清洗、归一化、滑动窗口构建、参数优化与结果可视化等环节。; 适合人群:具备一定机器学习与时间序列预测基础,从事新能源发电预测、智能电网调度、电力系统自动化等相关领域的科研人员、工程师及研究生。; 使用场景及目标:①解决光伏功率受辐照度、温度等因素影响而导致的强随机性、非平稳性预测难题;②提升短期(15分钟至1小时)光伏出力预测精度,支撑电网经济调度、储能协同控制与电力现货市场申报;③为多源气象数据驱动的可再生能源预测提供可扩展的技术框架。; 阅读建议:建议结合提供的MATLAB代码逐步实践,重点关注GWO与SSA的优化机制、VMD分解效果及其与LSTM的集成方式,注意避免时间泄漏问题,推荐在实际数据上复现实验以深入理解模型性能。

超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书

内容概要:本文档《超全Mathcad全桥LLC谐振变换器开关电源设计mathcad计算书》系统阐述了全桥LLC谐振变换器在开关电源中的设计方法,重点利用Mathcad工具进行精确的数学建模与参数计算。内容涵盖LLC谐振变换器的工作原理、关键参数设计(如谐振频率、励磁电感、变比等)、闭环控制策略、软开关实现条件、效率优化及工程实践中需注意的关键事项。文档通过详尽的数学推导和工程实例,构建了一套完整的从理论分析到实际应用的设计流程,特别强调了在不同负载与输入电压条件下确保ZVS/ZCS软开关的实现机制,并提供了实际设计中的取值依据与优化方向,为电力电子工程师提供了一个高效、可靠的设计参考方案。; 适合人群:具备电力电子技术基础,从事开关电源研发的工程师、高校电力电子及相关专业的研究生与科研人员,以及熟悉Mathcad、Simulink等仿真与计算工具的技术人员;; 使用场景及目标:① 掌握全桥LLC谐振变换器的参数设计与性能优化方法;② 开发高效率、高功率密度的软开关电源系统;③ 支持科研项目或工业产品中高性能电源模块的设计与验证;④ 结合仿真模型进行设计结果的验证与教学培训;; 阅读建议:建议结合配套的仿真模型与计算书同步学习,重点关注参数设计公式的推导过程与工程取值的合理性,动手复现计算步骤以加深理解,并通过仿真手段验证设计结果的准确性与鲁棒性。

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T12_eVTOL低空经济低空公共航线网络规划设计方案_可研报告版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

T07_低空经济与智能网联汽车融合的城市空地一体出行服务平台建设方案_决策评审版.pptx

具有PWM控制VSC-HVDC链路的IEEE30总线传输系统(Simulink仿真实现)

内容概要:本文详细介绍了基于Simulink仿真实现的具有PWM控制VSC-HVDC链路的IEEE30总线传输系统,系统性地阐述了电压源换流器高压直流输电(VSC-HVDC)的技术原理及其在复杂电力系统中的集成应用。研究重点涵盖VSC-HVDC系统的基本结构、PWM调制控制策略的设计与实现,并将其嵌入IEEE30节点标准测试系统中,构建完整的多区域交直流混合输电仿真模型。通过Simulink平台对系统在不同运行工况下的动态响应进行仿真分析,验证了PWM控制在有功功率、无功功率独立调节、直流电压稳定及故障穿越能力方面的有效性。该仿真模型不仅有助于深入理解现代高压直流输电技术的工作机制,也为含大规模可再生能源接入的智能电网稳定性分析与优化控制提供了可靠的技术支撑与研究平台。; 适合人群:具备电力系统分析、高压直流输电技术基础以及Simulink/MATLAB仿真能力的研究生、科研人员及从事电力系统规划与运行的工程技术人员。; 使用场景及目标:① 掌握VSC-HVDC系统的核心控制原理及其在多节点电网中的建模方法;② 学习并实践基于PWM调制的矢量控制策略在Simulink中的实现过程;③ 对比分析交直流系统在稳态与暂态过程中的功率传输特性与动态响应,为新能源并网、电网互联等实际工程问题提供仿真依据和技术参考。; 阅读建议:建议读者结合文中理论分析与Simulink仿真模型,逐步完成模型搭建与参数设置,并通过改变系统运行条件(如负载投切、故障扰动等)观察系统响应变化,深入理解控制策略的有效性与局限性。同时,鼓励扩展模型功能,如引入风电/光伏等可再生能源接口,进一步探索VSC-HVDC在现代电力系统中的综合应用潜力。

九个版本一步跨:从JDK8到JDK17的特性增量、强封装迁移与ZGC实战解析

这篇文章要回答的,正是“从 JDK 8 直接跨到 JDK 17”这件事里最常被问到的四个问题: 九个版本到底攒下了什么? 语言、API、运行时三类变化里,哪些值得用、各自从哪个版本开始可用、哪些说法其实传错了。 升级为什么会“起不来”或“跑不通”? 强封装、被删除的模块、被移除的 JVM 参数,分别会以什么样子出现,怎么定位、怎么治本。 ZGC 的收益是真的吗?怎么测才算数? 停顿影响面怎么估算,压测时有哪些坑会把收益放大或掩盖。 落地要分几步走? 站在 2026 年,还该不该把 17 当终点。

上一篇: 专访C++之父Bjarne Stroustrup博士(转)
下一篇: C++之父Bjarne Stroustrup印象(z转)
jisucpu
博客等级 码龄18年 1粉丝 28原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值