命令行运行pip install dlib==19.24.0 --no-
cache-dir --verbose报错：
Using pip 25.1.1
from D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\pip (python 3.13)
Collecting dlib==19.24.0
Downloading dlib-19.24.0.tar.gz (3.2 MB)
━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ 3.2/3.2 MB 100.9 kB/s eta 0
:00
:00
Running command python
setup.py egg_info
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:212
: SyntaxWarning
: invalid escape sequence '\('
major = re.findall("set\(CPACK_PACKAGE_VERSION_MAJOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:213
: SyntaxWarning
: invalid escape sequence '\('
minor = re.findall("set\(CPACK_PACKAGE_VERSION_MINOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:214
: SyntaxWarning
: invalid escape sequence '\('
patch = re.findall("set\(CPACK_PACKAGE_VERSION_PATCH.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:194
: SetuptoolsDeprecationWarning
: The test command is disabled and references to it are deprecated.
!!
********************************************************************************
Please remove any references to `
setuptools.command.test` in all supported versions of the affected package.
This deprecation is overdue, please update your
project and remove deprecated
calls to avoid build errors in the future.
********************************************************************************
!!
from setuptools.command.test import test as TestCommand
D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py
:289
: UserWarning
: Unknown distribution option
: 'tests_require'
warnings.warn(msg)
running egg_info
creating C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info
writing C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\PKG-INFO
writing dependency_links to C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\dependency_links.txt
writing top-level names to C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\top_level.txt
writing manifest file 'C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\SOURCES.txt'
reading manifest file 'C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\SOURCES.txt'
reading manifest template 'MANIFEST.in'
no previously-included directories found matching 'tools\python\build*'
no previously-included directories found matching 'dlib\cmake_utils\*\build*'
no previously-included directories found matching 'dlib\test'
warning
: no previously-included files matching '*.pyc' found anywhere in distribution
writing manifest file 'C
:\Users\徐庆凯\AppData\Local\Temp\pip-pip-egg-info-x4hwlbut\dlib.egg-info\SOURCES.txt'
Preparing metadata (
setup.py) ... done
Building wheels for collected packages
: dlib
DEPRECATION
: Building 'dlib' using the legacy
setup.py bdist_wheel mechanism, which will be removed in a future version. pip 25.3 will enforce this behaviour change. A possible replacement is to use the standardized build interface by setting the `--use-pep517` option, (possibly combined with `--no-build-isolation`), or adding a `py
project.toml` file to the source tree of 'dlib'. Discussion can be found at https
://github.com/pypa/pip/issues/6334
Running command python
setup.py bdist_wheel
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:212
: SyntaxWarning
: invalid escape sequence '\('
major = re.findall("set\(CPACK_PACKAGE_VERSION_MAJOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:213
: SyntaxWarning
: invalid escape sequence '\('
minor = re.findall("set\(CPACK_PACKAGE_VERSION_MINOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:214
: SyntaxWarning
: invalid escape sequence '\('
patch = re.findall("set\(CPACK_PACKAGE_VERSION_PATCH.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:194
: SetuptoolsDeprecationWarning
: The test command is disabled and references to it are deprecated.
!!
********************************************************************************
Please remove any references to `
setuptools.command.test` in all supported versions of the affected package.
This deprecation is overdue, please update your
project and remove deprecated
calls to avoid build errors in the future.
********************************************************************************
!!
from setuptools.command.test import test as TestCommand
D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py
:289
: UserWarning
: Unknown distribution option
: 'tests_require'
warnings.warn(msg)
running bdist_wheel
running build
running build_py
running build_ext
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:129
: DeprecationWarning
: distutils Version classes are deprecated. Use packaging.version instead.
if LooseVersion(cmake_version) < '3.1.0'
:
Building extension for Python 3.13.5 (tags/v3.13.5
:6cb20a2, Jun 11 2025, 16
:15
:46) [MSC v.1943 64 bit (AMD64)]
Invoking CMake
setup: 'cmake C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\tools\python -DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\build\lib.win-amd64-cpython-313 -DPYTHON_EXECUTABLE=D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\python.exe -DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\build\lib.win-amd64-cpython-313 -A x64'
Traceback (most recent call last)
:
File "<string>", line 2, in <module>
exec(compile('''
~~~~^^^^^^^^^^^^
# This is <pip-
setuptools-caller> -- a caller that pip uses to run
setup.py
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
...<32 lines>...
exec(compile(
setup_py_code, filename, "exec"))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
''' % ('C
:\\Users\\徐庆凯\\AppData\\Local\\Temp\\pip-install-1bugzpia\\dlib_3252fe8772d348fc97cbac2fb469313f\\
setup.py',), "<pip-
setuptools-caller>", "exec"))
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "<pip-
setuptools-caller>", line 35, in <module>
File "C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py", line 222, in <module>
setup(
~~~~~^
name='dlib',
^^^^^^^^^^^^
...<38 lines>...
],
^^
)
^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\__init__.py", line 115, in
setup
return distutils.core.
setup(**attrs)
~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\core.py", line 186, in
setup
return run_commands(dist)
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\core.py", line 202, in run_commands
dist.run_commands()
~~~~~~~~~~~~~~~~~^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py", line 1002, in run_commands
self.run_command(cmd)
~~~~~~~~~~~~~~~~^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\dist.py", line 1102, in run_command
super().run_command(command)
~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py", line 1021, in run_command
cmd_obj.run()
~~~~~~~~~~~^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\command\bdist_wheel.py", line 370, in run
self.run_command("build")
~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\cmd.py", line 357, in run_command
self.distribution.run_command(command)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\dist.py", line 1102, in run_command
super().run_command(command)
~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py", line 1021, in run_command
cmd_obj.run()
~~~~~~~~~~~^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\command\build.py", line 135, in run
self.run_command(cmd_name)
~~~~~~~~~~~~~~~~^^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\cmd.py", line 357, in run_command
self.distribution.run_command(command)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\dist.py", line 1102, in run_command
super().run_command(command)
~~~~~~~~~~~~~~~~~~~^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py", line 1021, in run_command
cmd_obj.run()
~~~~~~~~~~~^^
File "C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py", line 134, in run
self.build_extension(ext)
~~~~~~~~~~~~~~~~~~~~^^^^^
File "C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py", line 171, in build_extension
subprocess.check_call(cmake_
setup, cwd=build_folder)
~~~~~~~~~~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\subprocess.py", line 419, in check_call
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError
: Command '['cmake', 'C
:\\Users\\徐庆凯\\AppData\\Local\\Temp\\pip-install-1bugzpia\\dlib_3252fe8772d348fc97cbac2fb469313f\\tools\\python', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY=C
:\\Users\\徐庆凯\\AppData\\Local\\Temp\\pip-install-1bugzpia\\dlib_3252fe8772d348fc97cbac2fb469313f\\build\\lib.win-amd64-cpython-313', '-DPYTHON_EXECUTABLE=D
:\\Users\\徐庆凯\\AppData\\Local\\Programs\\Python\\Python313\\python.exe', '-DCMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE=C
:\\Users\\徐庆凯\\AppData\\Local\\Temp\\pip-install-1bugzpia\\dlib_3252fe8772d348fc97cbac2fb469313f\\build\\lib.win-amd64-cpython-313', '-A', 'x64']' returned non-zero exit status 3221226505.
error
: subprocess-exited-with-error
× python
setup.py bdist_wheel did not run successfully.
│ exit code
: 1
╰─> See above for output.
note
: This error originates
from a subprocess, and is likely not a problem with pip.
full command
: 'D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\python.exe' -u -c '
exec(compile('"'"''"'"''"'"'
# This is <pip-
setuptools-caller> -- a caller that pip uses to run
setup.py
#
# - It imports
setuptools before invoking
setup.py, to enable
projects that directly
# import
from `distutils.core` to work with newer packaging standards.
# - It provides a clear error message when
setuptools is not installed.
# - It sets `sys.argv[0]` to the underlying `
setup.py`, when invoking `
setup.py` so
#
setuptools doesn'"'"'t think the script is `-c`. This avoids the following warning
:
# manifest_maker
: standard file '"'"'-c'"'"' not found".
# - It generates a shim
setup.py, for handling
setup.cfg-only
projects.
import os, sys, tokenize, traceback
try
:
import
setuptools
except ImportError
:
print(
"ERROR
: Can not execute `
setup.py` since
setuptools failed to import in "
"the build environment with exception
:",
file=sys.stderr,
)
traceback.print_exc()
sys.exit(1)
__file__ = %r
sys.argv[0] = __file__
if os.path.exists(__file__)
:
filename = __file__
with tokenize.open(__file__) as f
:
setup_py_code = f.read()
else
:
filename = "<auto-generated
setuptools caller>"
setup_py_code = "
from setuptools import
setup;
setup()"
exec(compile(
setup_py_code, filename, "exec"))
'"'"''"'"''"'"' % ('"'"'C
:\\Users\\徐庆凯\\AppData\\Local\\Temp\\pip-install-1bugzpia\\dlib_3252fe8772d348fc97cbac2fb469313f\\
setup.py'"'"',), "<pip-
setuptools-caller>", "exec"))' bdist_wheel -d 'C
:\Users\徐庆凯\AppData\Local\Temp\pip-wheel-m03b8zax'
cwd
: C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\\
Building wheel for dlib (
setup.py) ... error
ERROR
: Failed building wheel for dlib
Running
setup.py clean for dlib
Running command python
setup.py clean
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:212
: SyntaxWarning
: invalid escape sequence '\('
major = re.findall("set\(CPACK_PACKAGE_VERSION_MAJOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:213
: SyntaxWarning
: invalid escape sequence '\('
minor = re.findall("set\(CPACK_PACKAGE_VERSION_MINOR.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:214
: SyntaxWarning
: invalid escape sequence '\('
patch = re.findall("set\(CPACK_PACKAGE_VERSION_PATCH.*\"(.*)\"", open(cmake_file).read())[0]
C
:\Users\徐庆凯\AppData\Local\Temp\pip-install-1bugzpia\dlib_3252fe8772d348fc97cbac2fb469313f\
setup.py
:194
: SetuptoolsDeprecationWarning
: The test command is disabled and references to it are deprecated.
!!
********************************************************************************
Please remove any references to `
setuptools.command.test` in all supported versions of the affected package.
This deprecation is overdue, please update your
project and remove deprecated
calls to avoid build errors in the future.
********************************************************************************
!!
from setuptools.command.test import test as TestCommand
D
:\Users\徐庆凯\AppData\Local\Programs\Python\Python313\Lib\site-packages\
setuptools\_distutils\dist.py
:289
: UserWarning
: Unknown distribution option
: 'tests_require'
warnings.warn(msg)
running clean
removing 'build\temp.win-amd64-cpython-313' (and everything under it)
'build\lib.win-amd64-cpython-313' does not exist -- can't clean it
'build\bdist.win-amd64' does not exist -- can't clean it
'build\scripts-3.13' does not exist -- can't clean it
removing 'build'
Failed to build dlib
ERROR
: Failed to build installable wheels for some py
project.toml based
projects (dlib)
通过修改项目的gradle.properties文件中的org.gradle.configureondemand属性为false，可以有效地解决项目打开时遇到的问题。
扫一扫
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
