P2V Assistant 2.1.1 更新

最新推荐文章于 2021-08-10 20:18:07 发布

原创最新推荐文章于 2021-08-10 20:18:07 发布 · 418 阅读

CC 4.0 BY-SA版权

P2VAssistant2.1.1版本修复了多项问题，包括允许更广泛的硬件克隆，如解决了IBM eServers带有大型ServeRAID支持的磁盘无法克隆的问题；默认禁用SMP以提高稳定性；增加了DHCP超时和重试限制来解决网络问题；还修复了首次运行后许可证安装问题及HP DL380等机型的克隆问题。

部署运行你感兴趣的模型镜像

P2V Assistant
Latest Version: 2.1.1 | 4/6/06 | Build 22603
下载地址： http://www.vmware.com/download/p2v/

修正了：

The P2V Boot CD 2.1.1 includes several fixes to allow P2V cloning of a wider range of hardware. Specifically:

An issue preventing cloning of IBM eServers with large ServeRAID-backed volumes was fixed. (Disks with more than 65535 cylinders could not be cloned.)
Symmetric multi-processing (SMP) is disabled by default. Instabilities and failure to boot were noticed on some multi-processor systems, so the P2V Boot CD will only boot with one CPU enabled by default.
Note: If you wish to boot with SMP enabled, enter smp at the P2V Boot CD prompt.
The DHCP timeout and retry limit were increased to resolve network failure on networks that require the network adapter be enabled for over a minute before traffic is allowed.

The P2V Assistant 2.1.1 includes several fixes as well:

An issue preventing the installation of the license when running P2V Assistant for the first time after Workstation 5.0 has run was fixed.
An issue preventing cloning of HP DL380 and similar machines with SmartArray 5i-backed volumes was fixed.

您可能感兴趣的与本文相关的镜像