minigui ARM 的交叉编译, 测试为 hisi3531

最新推荐文章于 2021-05-13 20:21:20 发布

原创最新推荐文章于 2021-05-13 20:21:20 发布 · 1.2k 阅读

2 ·

CC 4.0 BY-SA版权

文章标签：

#minigui #hisi3531 #arm #交叉编译 #脚本

本文介绍如何为嵌入式设备编译MinGUI环境，包括下载所需软件包、配置交叉编译工具链及编译步骤。具体涉及zlib、PNG、JPEG、FreeType等库的编译安装。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

先到 http://www.minigui.org/en/download/ 去下载下面相关的包，并解压放在同一目录下，之后修改编译工具（HOST_CROSS=arm-hisiv200-linux），最后运行 ./build.sh

gvfb-1.0.0 libminigui-3.0.12-linux minigui-res-be-3.0.12

build.sh jpeg-7 libpng-1.2.37 qvfb2-2.0

freetype-2.3.9-fm20100818 libmgplus-1.2.4 mg-samples-3.0.12 zlib-1.2.2

build.sh 的内容如下：

DIR=`pwd`
echo $DIR
OUTPUT_DIR=$DIR/build
mkdir -p $OUTPUT_DIR

export CFLAGS=-I$OUTPUT_DIR/include 
export CPPFLAGS=-I$OUTPUT_DIR/include
export LDFLAGS=-L$OUTPUT_DIR/lib
export PKG_CONFIG_PATH=$OUTPUT_DIR/lib/pkgconfig/
export MINIGUI_CFLAGS=-I$OUTPUT_DIR/include
export MINIGUI_LIBS="-L$OUTPUT_DIR/lib -lminigui_ths -lpthread -lm -ldl"


HOST_CROSS=arm-hisiv200-linux
CROSS=${HOST_CROSS}-
export CC=${CROSS}gcc   
export CXX=${CROSS}g++
export LD=${CROSS}ld      
export AS=${CROSS}as      
export AR=${CROSS}ar    

echo "+++++++++++++++++++++++++++++++++++++++++"
echo "zlib"
echo "+++++++++++++++++++++++++++++++++++++++++"

 cd $DIR/zlib-1.2.2
./configure     --prefix=$OUTPUT_DIR    --shared   
make -j 8
make install 



echo "+++++++++++++++++++++++++++++++++++++++++"
echo "png"
echo "+++++++++++++++++++++++++++++++++++++++++"

cd $DIR/libpng-1.2.37
./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS    
make -j 8
make install 


echo "+++++++++++++++++++++++++++++++++++++++++"
echo "jpeg"
echo "+++++++++++++++++++++++++++++++++++++++++"

cd $DIR/jpeg-7


./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS    
make 
make install 


echo "+++++++++++++++++++++++++++++++++++++++++"
echo "freetype"
echo "+++++++++++++++++++++++++++++++++++++++++"

cd $DIR/freetype-2.3.9-fm20100818
./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS    --enable-static
make -j 8
make install 


echo "+++++++++++++++++++++++++++++++++++++++++"
echo "minigui"
echo "+++++++++++++++++++++++++++++++++++++++++"

cd $DIR/libminigui-3.0.12-linux
./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS   \
	--enable-static \
	--disable-screensaver\
	--disable-splash\
	--disable-jpgsupport    \
	--enable-videoqvfb=no\
	--enable-rtosxvfb=no \
	--enable-pcxvfb=no
make -j 8
make install 


echo "+++++++++++++++++++++++++++++++++++++++++"
echo "libmgplus-1.2.4"
echo "+++++++++++++++++++++++++++++++++++++++++"

cd $DIR/libmgplus-1.2.4

./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS  


make -j 8
make install 

echo "+++++++++++++++++++++++++++++++++++++++++"
echo "mg-samples-3.0.12"
echo "+++++++++++++++++++++++++++++++++++++++++"


cd $DIR/mg-samples-3.0.12
./configure   --prefix=$OUTPUT_DIR    --host=$HOST_CROSS    
make -j 8
make install