本文档指导如何从源码仓库中检出Heritrix3项目，并在Eclipse环境中进行定制开发。建议使用Heritrix3.0.0/heritrix3trunk版本，该版本采用Spring配置，便于扩展。此外，提供了详细的步骤来搭建开发环境，包括安装必要的插件和支持文件。
Use svn, checkout the project from the sourceforget.net on https: / / archive-crawler.svn.sourceforge.net/svnroot/archive-crawler/trunk/heritrix3
Especially if you're customizing Heritrix (as seems to be the case from
setting up a dev environment), you should be basing your work off of
Heritrix 3.0.0/heritrix3 trunk (aka 'H3').
H3 is the main focus of our development going forward, and its
Spring-based configuration offers easier opportunities for incremental
extension.
It's also best to work from an SVN checkout, as the working source tree
has Eclipse project-support files (. project,. classpath) as used by the
Heritrix core team.
So my suggestions would be:
- Discard any prior projects
- Make sure your Eclipse install includes SVN and Maven support
- Create a new project, SVN-> "Checkout projects from SVN", using URL
https: / / archive-crawler.svn.sourceforge.net/svnroot/archive-crawler/trunk/heritrix3
- Attempt one Maven2 install build from that checkout, to trigger
population of your local M2_REPO with all necessary 3rd-party libraries
- If Eclipse seems not to recognize paths it should, try one or all of:
- 'Refresh' menupick on project
- Restarting Eclipse
- Toggling the 'build automatically' or 'clean ...' options
These Ubuntu-centric notes from my colleague Steve may be helpful,
though they are still explicitly only regarding H1/H2:
https: / / webarchive.jira.com / wiki / display / ~ siznax / Heritrix + in + Eclipse
If anyone can verify / update these prior guides to work with H3, bringing
a developer from ground state to a working Eclipse H3 dev project,
that'd be greatly appreciated.
Especially if you're customizing Heritrix (as seems to be the case from
setting up a dev environment), you should be basing your work off of
Heritrix 3.0.0/heritrix3 trunk (aka 'H3').
H3 is the main focus of our development going forward, and its
Spring-based configuration offers easier opportunities for incremental
extension.
It's also best to work from an SVN checkout, as the working source tree
has Eclipse project-support files (. project,. classpath) as used by the
Heritrix core team.
So my suggestions would be:
- Discard any prior projects
- Make sure your Eclipse install includes SVN and Maven support
- Create a new project, SVN-> "Checkout projects from SVN", using URL
https: / / archive-crawler.svn.sourceforge.net/svnroot/archive-crawler/trunk/heritrix3
- Attempt one Maven2 install build from that checkout, to trigger
population of your local M2_REPO with all necessary 3rd-party libraries
- If Eclipse seems not to recognize paths it should, try one or all of:
- 'Refresh' menupick on project
- Restarting Eclipse
- Toggling the 'build automatically' or 'clean ...' options
These Ubuntu-centric notes from my colleague Steve may be helpful,
though they are still explicitly only regarding H1/H2:
https: / / webarchive.jira.com / wiki / display / ~ siznax / Heritrix + in + Eclipse
If anyone can verify / update these prior guides to work with H3, bringing
a developer from ground state to a working Eclipse H3 dev project,
that'd be greatly appreciated.
扫一扫
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
