jacycle的专栏

ML302 是中国移动最新推出的 LTE Cat.1 模块。ML302 支持 TD- LTE/FDD- LTE 通信制式，采用 LCC+LGA 封 装方式。   丰富的 Internet 协议、行业标准接口和功能，支持 Windows、Linux 和 Android 驱动。ML302 可广泛应用到 M2M 多个领域中，如共享、金融支付、POC、工业控制等。

The driver contains two parts: The driver for the AD7190 part, which may be used, without modifications, with any microcontroller. The Communication Driver, where the specific communication functions for the desired type of processor and communication protocol have to be implemented. This driver implements the communication with the device and hides the actual details of the communication protocol to the ADI driver. The Communication Driver has a standard interface, so the AD7190 driver can be used exactly as it is provided. There are three functions which are called by the AD7190 driver: SPI_Init() – initializes the communication peripheral. SPI_Write() – writes data to the device. SPI_Read() – reads data from the device.

stm32f40x rtthread gpio i2c ht16c21 VK2C21驱动，测试验证代码

python3 + django2 简易学生成绩管理系统，有学生老师课程成绩表

OneNET Demo例程 ：提供了开发板连接OneNET的Demo程序和相应的说明文档，Demo程序提供了一个编程框架，在该框架上用户只需要写很少的代码就可以上传数据至OneNET平台中；

port-mirroring is an OpenWrt package that sends copies of network packets from your OpenWrt router to another device on your network or beyond, giving you the ability to monitor and analyze network traffic without additional hardware. Intrusion detection systems, network application debugging, and network performance monitoring are common use cases. This is a continuation of the work started by Bruce Geng at https://code.google.com/p/port-mirroring/.

I2C Tools project contains a heterogeneous set of Linux tools: a bus probing tool, a chip dumper, register-level access helpers, EEPROM decoding scripts, and more. The various tools included in this package are grouped by category, each category has its own sub-directory: · eeprom Perl scripts for decoding different types of EEPROMs (SPD, EDID...) These scripts rely on the "eeprom" kernel driver. They are installed by default. · eepromer Tools for writing to EEPROMs. These tools rely on the "i2c-dev" kernel driver. They are not installed by default. · include C/C++ header files for I2C and SMBus access over i2c-dev. Installed by default. · py-smbus Python wrapper for SMBus access over i2c-dev. Not installed by default. · tools I2C device detection and register dump tools. These tools rely on the "i2c-dev" kernel driver. They are installed by default. INSTALLATION: There's no configure script, so simply run "make" to build the tools, and "make install" to install them. You also can use "make uninstall" to remove all the files you installed. By default, files are installed in /usr/local but you can change this behavior by editing the Makefile file and setting prefix to wherever you want. You may change the C compiler and the compilation flags as well. Optionally, you can run "make strip" prior to "make install" if you want smaller binaries. However, be aware that this will prevent any further attempt to debug the programs. Read more: http://linux.softpedia.com/get/System/Hardware/I2C-Tools-31650.shtml#ixzz46LewwyUK

nordic semi bluetooth ble android apk 4.3 是apk不是源码哦 no.nordicsemi.android.beacon.service.apk no.nordicsemi.android.mcp.apk no.nordicsemi.android.nrfbeacon.apk no.nordicsemi.android.nrftoolbox.apk nRFUART_Googlev2.apk nrfTempAndroid.apk

根据atmel官方例程sam3x_ek_bertos_http_demo，自己移植到keil下的，希望对大家有帮助。 使用keil时，windows下确保安装arm-2012.03-56-arm-none-eabi.exe这样类似的gcc编译软件 在keil->Project->Manage->Components,Environment,Books...->Folders/Externsions的 Use GCC的GNU-Tool Folder中指定arm-2012.03-56-arm-none-eabi.exe的安装目录

在TI公司LM3S系列ARM上跑small rtos，给出了4个任务的例程！

C8051F32X，中文数据手册！！！ 主要用于USB方面的开发！

51串口源程序，串口收到或发出数据LED灯都会亮起，系统运行灯保持闪烁状态。可以通过系统库函数printf向串口发送数据。

C51编程总结<br>pdf

数字图像处理数字图像处理(何东建)配套ppt

数字图像处理数字图像处理(何东建)配套PPT