RFC 1925 - The Twelve Networking Truths

本文档总结了互联网领域的十二项基本真理,这些真理适用于所有类型的网络,并不限于TCP/IP或特定子集。文中详细阐述了从它必须工作到在协议设计中,完美不是指无物可增,而是无可再减等原则。
部署运行你感兴趣的模型镜像

RFC 1925 - The Twelve Networking Truths

原贴地址:
http://www.faqs.org/rfcs/rfc1925.html
原贴时间:
1996-01-01
原贴作者:
RFC

--------------------------------------------------------------------------------


Network Working Group R. Callon, Editor
Request for Comments: 1925 IOOF
Category: Informational 1 April 1996

The Twelve Networking Truths

Status of this Memo

This memo provides information for the Internet community. This memo
does not specify an Internet standard of any kind. Distribution of
this memo is unlimited.

Abstract

This memo documents the fundamental truths of networking for the
Internet community. This memo does not specify a standard, except in
the sense that all standards must implicitly follow the fundamental
truths.

Acknowledgements

The truths described in this memo result from extensive study over an
extended period of time by many people, some of whom did not intend
to contribute to this work. The editor merely has collected these
truths, and would like to thank the networking community for
originally illuminating these truths.

1. Introduction

This Request for Comments (RFC) provides information about the
fundamental truths underlying all networking. These truths apply to
networking in general, and are not limited to TCP/IP, the Internet,
or any other subset of the networking community.

2. The Fundamental Truths

(1) It Has To Work.

(2) No matter how hard you push and no matter what the priority,
you can't increase the speed of light.

(2a) (corollary). No matter how hard you try, you can't make a
baby in much less than 9 months. Trying to speed this up
*might* make it slower, but it won't make it happen any
quicker.

(3) With sufficient thrust, pigs fly just fine. However, this is
not necessarily a good idea. It is hard to be sure where they
are going to land, and it could be dangerous sitting under them
as they fly overhead.

(4) Some things in life can never be fully appreciated nor
understood unless experienced firsthand. Some things in
networking can never be fully understood by someone who neither
builds commercial networking equipment nor runs an operational
network.

(5) It is always possible to aglutenate multiple separate problems
into a single complex interdependent solution. In most cases
this is a bad idea.

(6) It is easier to move a problem around (for example, by moving
the problem to a different part of the overall network
architecture) than it is to solve it.

(6a) (corollary). It is always possible to add another level of
indirection.

(7) It is always something

(7a) (corollary). Good, Fast, Cheap: Pick any two (you can't
have all three).

(8) It is more complicated than you think.

(9) For all resources, whatever it is, you need more.

(9a) (corollary) Every networking problem always takes longer to
solve than it seems like it should.

(10) One size never fits all.

(11) Every old idea will be proposed again with a different name and
a different presentation, regardless of whether it works.

(11a) (corollary). See rule 6a.

(12) In protocol design, perfection has been reached not when there
is nothing left to add, but when there is nothing left to take
away.

Security Considerations

This RFC raises no security issues. However, security protocols are
subject to the fundamental networking truths.

References

The references have been deleted in order to protect the guilty and
avoid enriching the lawyers.

Author's Address

Ross Callon
Internet Order of Old Farts
c/o Bay Networks
3 Federal Street
Billerica, MA 01821

Phone: 508-436-3936
EMail: rcallon@baynetworks.com

您可能感兴趣的与本文相关的镜像

Stable-Diffusion-3.5

Stable-Diffusion-3.5

图片生成
Stable-Diffusion

Stable Diffusion 3.5 (SD 3.5) 是由 Stability AI 推出的新一代文本到图像生成模型,相比 3.0 版本,它提升了图像质量、运行速度和硬件效率

【事件触发一致性】研究多智能体网络如何通过分布式事件驱动控制实现有限时间内的共识(Matlab代码实现)内容概要:本文围绕多智能体网络中的事件触发一致性问题,研究如何通过分布式事件驱动控制实现有限时间内的共识,并提供了相应的Matlab代码实现方案。文中探讨了事件触发机制在降低通信负担、提升系统效率方面的优势,重点分析了多智能体系统在有限时间收敛的一致性控制策略,涉及系统模型构建、触发条件设计、稳定性与收敛性分析等核心技术环节。此外,文档还展示了该技术在航空航天、电力系统、机器人协同、无人机编队等多个前沿领域的潜在应用,体现了其跨学科的研究价值和工程实用性。; 适合人群:具备一定控制理论基础和Matlab编程能力的研究生、科研人员及从事自动化、智能系统、多智能体协同控制等相关领域的工程技术人员。; 使用场景及目标:①用于理解和实现多智能体系统在有限时间内达成一致的分布式控制方法;②为事件触发控制、分布式优化、协同控制等课题提供算法设计与仿真验证的技术参考;③支撑科研项目开发、学术论文复现及工程原型系统搭建; 阅读建议:建议结合文中提供的Matlab代码进行实践操作,重点关注事件触发条件的设计逻辑与系统收敛性证明之间的关系,同时可延伸至其他应用场景进行二次开发与性能优化。
【四旋翼无人机】具备螺旋桨倾斜机构的全驱动四旋翼无人机:建模与控制研究(Matlab代码、Simulink仿真实现)内容概要:本文围绕具备螺旋桨倾斜机构的全驱动四旋翼无人机展开,重点研究其动力学建模与控制系统设计。通过Matlab代码与Simulink仿真实现,详细阐述了该类无人机的运动学与动力学模型构建过程,分析了螺旋桨倾斜机构如何提升无人机的全向机动能力与姿态控制性能,并设计相应的控制策略以实现稳定飞行与精确轨迹跟踪。文中涵盖了从系统建模、控制器设计到仿真验证的完整流程,突出了全驱动结构相较于传统四旋翼在欠驱动问题上的优势。; 适合人群:具备一定控制理论基础和Matlab/Simulink使用经验的自动化、航空航天及相关专业的研究生、科研人员或无人机开发工程师。; 使用场景及目标:①学习全驱动四旋翼无人机的动力学建模方法;②掌握基于Matlab/Simulink的无人机控制系统设计与仿真技术;③深入理解螺旋桨倾斜机构对飞行性能的影响及其控制实现;④为相关课题研究或工程开发提供可复现的技术参考与代码支持。; 阅读建议:建议读者结合提供的Matlab代码与Simulink模型,逐步跟进文档中的建模与控制设计步骤,动手实践仿真过程,以加深对全驱动无人机控制原理的理解,并可根据实际需求对模型与控制器进行修改与优化。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值