linux下安装dell SP2208WFP显示器摄像头驱动

最新推荐文章于 2024-05-28 03:06:00 发布

iteye_20954

最新推荐文章于 2024-05-28 03:06:00 发布

阅读量240

点赞数

本文提供了一种在 Ubuntu 8.04 系统上为 Dell SP2208WFP 显示器安装 Linux 摄像头驱动的方法。通过从 Berlios 存储库获取最新源代码并进行编译安装，成功解决了官方未提供驱动的问题。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

dell SP2208WFP显示器官方没有linux下的摄像头驱动，在网上找了找，发现一个办法可以解决，记录一下！
我现在的系统是ubuntu8.04,安装步骤如下:
1. install prereqs if you don't have them

Code:

sudo aptitude install subversion build-essential

2. back up current module, just in case

Code:

sudo cp /lib/modules/2.6.24-16-generic/ubuntu/media/usbvideo/uvcvideo.ko /lib/modules/2.6.24-16-generic/ubuntu/media/usbvideo/uvcvideo.ko.bak

[DiabolusItalicus' note: repeat the above command for all the kernel versions you have installed or intend to use the webcam with.
Just remember to replace "2.6.24.16" with your versions.
I have kernels 2.6.24.18 and 2.6.24.19 installed, so I repeated the above command twice adjusting kernel version as required.]

3. Check out latest source code

Code:

svn checkout svn://svn.berlios.de/linux-uvc/linux-uvc/trunk

4. go to the 'trunk' directory

Code:

cd trunk

5. Edit Makefile

Code:

nano Makefile

(or use gedit or whatever you like)

6. Change the line starting with INSTALL_MOD_DIR to this:

Code:

INSTALL_MOD_DIR := /lib/modules/$(KERNEL_VERSION)/ubuntu/media/usbvideo

7. Install it

Code:

make

sudo make install

sudo modprobe uvcvideo

8. Reboot (you could also unload the old module and load the new one, but I didn't remember the command off the top of my head, and I'm lazy)