IBM LS21 安装Solaris 10 u9
这几天在IBM LS21 上安装solaris 10 一直没有进入到安装界面

一直停留在上图画面中.郁闷
今天在国外网站上看到一个解决方法,试了一下.可以成功引导安装
方法如下:
So in order to install Solaris 10 on LS21 you need to go to BIOS and:
1) Select "Advanced Setup", and then "PCI Bus Control" and then select the
"PCI Enhanced Configuration Access" option.
2) Press the <> or to select "Enabled".
参考地址:http://milek.blogspot.com/2007/01/solaris-10-on-ibm-ls21.html
另IBM官方也提供了一个解决方法,未测试:
4.1 Installing Sun Solaris 10 Operating System 8/07
To install Sun Solaris 10 Operating System 8/07, complete the following steps:
- In order to install Sun Solaris 10 Operating System 8/07 or later:
- Turn on the blade server.
- When the prompt Press F1 for Configuration/Setup is displayed, press F1 .
- Select Advanced Setup then select Baseboard Management Controller (BMC) Settings , and select Reboot System on NMI .
- Press the Right Arrow or Left Arrow key until Disabled is selected.
- Press Esc twice.
- Select Save Settings .
- Insert the Solaris 10 Software 1 for x86 Platforms CD into the CD drive and boot the system.
本文提供了在IBMLS21服务器上安装Solaris10系统的两种解决方案。一种是通过BIOS设置调整PCI配置选项,另一种是按照IBM官方指导进行系统配置更改。这些方法有助于解决无法进入安装界面的问题。

1125

被折叠的 条评论
为什么被折叠?



