<template>
<el-dialog
:title="!dataForm.id ? '新增' : '修改'"
:close-on-click-modal="false"
:visible.sync="visible"
width="80%"
top="5vh"
class="custom-dialog"
>
<el-tabs v-model="activeTab" type="border-card">
<el-tab-pane label="基础信息" name="basic">
<el-form
:model="dataForm"
:rules="dataRule"
ref="dataForm"
label-width="180px"
size="small"
>
<el-row :gutter="20">
<el-col :span="12">
<el-form-item label="电池ID" prop="batteryId">
<el-input v-model="dataForm.batteryId" placeholder="请输入电池ID"></el-input>
</el-form-item>
<el-form-item label="电池类型" prop="batteryKind">
<el-select
v-model="dataForm.batteryKind"
placeholder="请选择电池类型"
clearable
style="width:100%"
>
<el-option label="运营" :value="0"></el-option>
<el-option label="售后" :value="1"></el-option>
<el-option label="内测" :value="2"></el-option>
<el-option label="报废" :value="3"></el-option>
</el-select>
</el-form-item>
<el-form-item label="电池电压(V)" prop="batteryVoltage">
<el-input-number
v-model="dataForm.batteryVoltage"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="电池电流(A)" prop="batteryCurrent">
<el-input-number
v-model="dataForm.batteryCurrent"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="电池SOC(%)" prop="batterySoc">
<el-input-number
v-model="dataForm.batterySoc"
:min="0"
:max="100"
:precision="0"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="工作模式" prop="batteryWorkMode">
<el-select
v-model="dataForm.batteryWorkMode"
placeholder="请选择工作模式"
clearable
style="width:100%"
>
<el-option label="放电模式(0x01)" :value="1"></el-option>
<el-option label="充电模式(0x10)" :value="16"></el-option>
<el-option label="保护模式(0x21)" :value="33"></el-option>
<el-option label="待机无输出模式(0x30)" :value="48"></el-option>
<el-option label="待机预放电模式(0x31)" :value="49"></el-option>
<el-option label="故障需返厂(0xFF)" :value="255"></el-option>
</el-select>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="最高温度(℃)" prop="batteryTemperatureMax">
<el-input-number
v-model="dataForm.batteryTemperatureMax"
:min="-50"
:max="100"
:precision="1"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="最低温度(℃)" prop="batteryTemperatureMin">
<el-input-number
v-model="dataForm.batteryTemperatureMin"
:min="-50"
:max="100"
:precision="1"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="最高电压(V)" prop="batteryVoltageMax">
<el-input-number
v-model="dataForm.batteryVoltageMax"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="最低电压(V)" prop="batteryVoltageMin">
<el-input-number
v-model="dataForm.batteryVoltageMin"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="循环次数" prop="batteryCycleTimes">
<el-input-number
v-model="dataForm.batteryCycleTimes"
:min="0"
:precision="0"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
</el-col>
</el-row>
</el-form>
</el-tab-pane>
<el-tab-pane label="状态信息" name="status">
<el-form
:model="dataForm"
:rules="dataRule"
ref="dataForm"
label-width="180px"
size="small"
>
<el-row :gutter="20">
<el-col :span="12">
<el-form-item label="保护状态码" prop="batteryProtectCode">
<el-input
v-model="dataForm.batteryProtectCode"
placeholder="16位二进制保护状态码"
clearable
></el-input>
</el-form-item>
<el-form-item label="故障状态码" prop="batteryErrorCode">
<el-input
v-model="dataForm.batteryErrorCode"
placeholder="16位二进制故障状态码"
clearable
></el-input>
</el-form-item>
<el-form-item label="MOS状态" prop="mosStatus">
<el-input v-model="dataForm.mosStatus" placeholder="MOS状态"></el-input>
</el-form-item>
<el-form-item label="MOS温度(℃)" prop="mosTemp">
<el-input-number
v-model="dataForm.mosTemp"
:min="-50"
:max="150"
:precision="1"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="稳定状态" prop="steadyStatus">
<el-input v-model="dataForm.steadyStatus" placeholder="稳定状态"></el-input>
</el-form-item>
<el-form-item label="单体电压(V)" prop="cellVoltage">
<el-input-number
v-model="dataForm.cellVoltage"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="业务模式" prop="businessmode">
<el-select
v-model="dataForm.businessmode"
placeholder="请选择业务模式"
clearable
style="width:100%"
>
<el-option label="关机模式(1)" :value="1"></el-option>
<el-option label="运营模式(2)" :value="2"></el-option>
<el-option label="运输模式(3)" :value="3"></el-option>
<el-option label="通讯充电模式(4)" :value="4"></el-option>
<el-option label="盲充模式(5)" :value="5"></el-option>
<el-option label="存储模式(6)" :value="6"></el-option>
<el-option label="搜寻模式(7)" :value="7"></el-option>
<el-option label="返厂模式(8)" :value="8"></el-option>
</el-select>
</el-form-item>
<el-form-item label="数据标志" prop="flag">
<el-select
v-model="dataForm.flag"
placeholder="请选择数据标志"
clearable
style="width:100%"
>
<el-option label="设备主动上报(1)" :value="1"></el-option>
<el-option label="平台主动推送(2)" :value="2"></el-option>
<el-option label="平台指令反馈(3)" :value="3"></el-option>
</el-select>
</el-form-item>
</el-col>
</el-row>
</el-form>
</el-tab-pane>
<el-tab-pane label="设备信息" name="device">
<el-form
:model="dataForm"
:rules="dataRule"
ref="dataForm"
label-width="180px"
size="small"
>
<el-row :gutter="20">
<el-col :span="12">
<el-form-item label="设备型号" prop="model">
<el-input v-model="dataForm.model" placeholder="设备型号"></el-input>
</el-form-item>
<el-form-item label="制造商" prop="manufacture">
<el-input v-model="dataForm.manufacture" placeholder="制造商"></el-input>
</el-form-item>
<el-form-item label="IMEI" prop="imei">
<el-input v-model="dataForm.imei" placeholder="IMEI"></el-input>
</el-form-item>
<el-form-item label="IMSI" prop="imsi">
<el-input v-model="dataForm.imsi" placeholder="IMSI"></el-input>
</el-form-item>
<el-form-item label="ICCID" prop="iccid">
<el-input v-model="dataForm.iccid" placeholder="ICCID"></el-input>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="硬件版本" prop="trackerHardwareVersion">
<el-input v-model="dataForm.trackerHardwareVersion" placeholder="硬件版本"></el-input>
</el-form-item>
<el-form-item label="软件版本" prop="trackerSoftwareVersion">
<el-input v-model="dataForm.trackerSoftwareVersion" placeholder="软件版本"></el-input>
</el-form-item>
<el-form-item label="上报原因" prop="reportreason">
<el-input v-model="dataForm.reportreason" placeholder="上报原因"></el-input>
</el-form-item>
<el-form-item label="检测状态" prop="detstatus">
<el-input v-model="dataForm.detstatus" placeholder="检测状态"></el-input>
</el-form-item>
<el-form-item label="信号强度" prop="csq">
<el-input-number
v-model="dataForm.csq"
:min="0"
:max="31"
:precision="0"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
</el-col>
</el-row>
</el-form>
</el-tab-pane>
<el-tab-pane label="位置信息" name="location">
<el-form
:model="dataForm"
:rules="dataRule"
ref="dataForm"
label-width="180px"
size="small"
>
<el-row :gutter="20">
<el-col :span="12">
<el-form-item label="网络类型" prop="networkType">
<el-input v-model="dataForm.networkType" placeholder="网络类型"></el-input>
</el-form-item>
<el-form-item label="定位模式" prop="locationMode">
<el-input v-model="dataForm.locationMode" placeholder="定位模式"></el-input>
</el-form-item>
<el-form-item label="经度" prop="longitude">
<el-input-number
v-model="dataForm.longitude"
:min="-180"
:max="180"
:precision="6"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="经度方向" prop="longitudeDirection">
<el-select
v-model="dataForm.longitudeDirection"
placeholder="请选择方向"
clearable
style="width:100%"
>
<el-option label="东经(E)" value="E"></el-option>
<el-option label="西经(W)" value="W"></el-option>
</el-select>
</el-form-item>
<el-form-item label="纬度" prop="latitude">
<el-input-number
v-model="dataForm.latitude"
:min="-90"
:max="90"
:precision="6"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
</el-col>
<el-col :span="12">
<el-form-item label="纬度方向" prop="latitudeDirection">
<el-select
v-model="dataForm.latitudeDirection"
placeholder="请选择方向"
clearable
style="width:100%"
>
<el-option label="北纬(N)" value="N"></el-option>
<el-option label="南纬(S)" value="S"></el-option>
</el-select>
</el-form-item>
<el-form-item label="GPS速度(km/h)" prop="gpsSpeed">
<el-input-number
v-model="dataForm.gpsSpeed"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="GPS信号" prop="gpsSignal">
<el-input-number
v-model="dataForm.gpsSignal"
:min="0"
:precision="0"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="卫星数量" prop="satelliteNum">
<el-input-number
v-model="dataForm.satelliteNum"
:min="0"
:max="32"
:precision="0"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
<el-form-item label="定位精度(m)" prop="accuracy">
<el-input-number
v-model="dataForm.accuracy"
:min="0"
:precision="2"
controls-position="right"
style="width:100%"
></el-input-number>
</el-form-item>
</el-col>
</el-row>
</el-form>
</el-tab-pane>
</el-tabs>
<span slot="footer" class="dialog-footer">
<el-button @click="visible = false">取消</el-button>
<el-button type="primary" @click="dataFormSubmit()">确定</el-button>
</span>
</el-dialog>
</template>
<script>
export default {
data () {
return {
visible: false,
activeTab: 'basic', // 当前激活的标签页
dataForm: {
id: 0,
batteryKind: null, // 新增的电池类型字段
batteryId: '',
batteryVoltage: '',
batteryCurrent: '',
batterySoc: '',
batteryHardVersion: '',
batterySoftVersion: '',
batteryWorkMode: '',
batteryProtectCode: '',
batteryErrorCode: '',
batteryTemperatureMax: '',
batteryTemperatureMin: '',
batteryVoltageMax: '',
batteryVoltageMin: '',
mosStatus: '',
mosTemp: '',
batteryCycleTimes: '',
steadyStatus: '',
cellVoltage: '',
model: '',
manufacture: '',
imei: '',
imsi: '',
iccid: '',
trackerHardwareVersion: '',
trackerSoftwareVersion: '',
reportreason: '',
detstatus: '',
csq: '',
networkType: '',
locationMode: '',
longitude: '',
longitudeDirection: '',
latitude: '',
latitudeDirection: '',
gpsSpeed: '',
gpsSignal: '',
satelliteNum: '',
accuracy: '',
businessmode: '',
flag: '',
uploadTime: '',
createTime: '',
updateTime: ''
},
dataRule: {
batteryId: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryVoltage: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryCurrent: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batterySoc: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryHardVersion: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batterySoftVersion: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryWorkMode: [
{ required: true, message: '0x01(1):放电模式 0x10(16):充电模式 0x21(33):保护模式 0x30(48):待机无输出模式 0x31(49):待机预放电模式 0xFF(255):故障需返厂不能为空', trigger: 'blur' }
],
batteryProtectCode: [
{ required: true, message: '保护状态 bit16~bit 31 保留 bit15：Gsensor 故障 bit14：BMS 与 Tracker通讯超时 bit13: 预放电失败 bit12: IC保护 bit11: 智能充电通信超时 bit10：压差过大 bit9：温差过大 bit8：短路 bit7：充电过压 bit6：充电过流 bit5：放电欠压 bit4：放电过流 bit3：充电低温 bit2：充电高温 bit1：放电高温 bit0：放电低温不能为空', trigger: 'blur' }
],
batteryErrorCode: [
{ required: true, message: '转成2进制， 总共为16位，高8位为电池包工作状态，低8位为故障状态码 bit9BMS 与 Tracker通讯故障,bit8BMS 板 G sensor损坏,(8/9无效)bit7：失效,bit6：失衡,bit5：放电 MOS 损坏,bit4：充电 MOS 损坏,bit3IC 损坏,bit2：温度传感器损坏,bit1:采样线断线，虚焊等故障 保留，置 0,bit0：保留不能为空', trigger: 'blur' }
],
batteryTemperatureMax: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryTemperatureMin: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryVoltageMax: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryVoltageMin: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
mosStatus: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
mosTemp: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
batteryCycleTimes: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
steadyStatus: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
cellVoltage: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
model: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
manufacture: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
imei: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
imsi: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
iccid: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
trackerHardwareVersion: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
trackerSoftwareVersion: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
reportreason: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
detstatus: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
csq: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
networkType: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
locationMode: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
longitude: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
longitudeDirection: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
latitude: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
latitudeDirection: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
gpsSpeed: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
gpsSignal: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
satelliteNum: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
accuracy: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
businessmode: [
{ required: true, message: '业务模式 1:关机模式 2：运营模式 3：运输模式 4：通讯充电模式 5：盲充模式 6：存储模式 7：搜寻模式 8：返厂模式不能为空', trigger: 'blur' }
],
flag: [
{ required: true, message: '1：设备主动请求或上报 2：平台主动推送或下指令 3:平台指令反馈的结果不能为空', trigger: 'blur' }
],
uploadTime: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
createTime: [
{ required: true, message: '不能为空', trigger: 'blur' }
],
updateTime: [
{ required: true, message: '更新时间不能为空', trigger: 'blur' }
]
}
}
},
methods: {
init (id) {
this.dataForm.id = id || 0
this.visible = true
this.$nextTick(() => {
this.$refs['dataForm'].resetFields()
if (this.dataForm.id) {
this.$http({
url: this.$http.adornUrl(`/maya/mybatteryinfolastest/info/${this.dataForm.id}`),
method: 'get',
params: this.$http.adornParams()
}).then(({data}) => {
if (data && data.code === 0) {
this.dataForm.batteryId = data.myBatteryInfoLastest.batteryId
this.dataForm.batteryKind = data.myBatteryInfoLastest.batteryKind
this.dataForm.batteryVoltage = data.myBatteryInfoLastest.batteryVoltage
this.dataForm.batteryCurrent = data.myBatteryInfoLastest.batteryCurrent
this.dataForm.batterySoc = data.myBatteryInfoLastest.batterySoc
this.dataForm.batteryHardVersion = data.myBatteryInfoLastest.batteryHardVersion
this.dataForm.batterySoftVersion = data.myBatteryInfoLastest.batterySoftVersion
this.dataForm.batteryWorkMode = data.myBatteryInfoLastest.batteryWorkMode
this.dataForm.batteryProtectCode = data.myBatteryInfoLastest.batteryProtectCode
this.dataForm.batteryErrorCode = data.myBatteryInfoLastest.batteryErrorCode
this.dataForm.batteryTemperatureMax = data.myBatteryInfoLastest.batteryTemperatureMax
this.dataForm.batteryTemperatureMin = data.myBatteryInfoLastest.batteryTemperatureMin
this.dataForm.batteryVoltageMax = data.myBatteryInfoLastest.batteryVoltageMax
this.dataForm.batteryVoltageMin = data.myBatteryInfoLastest.batteryVoltageMin
this.dataForm.mosStatus = data.myBatteryInfoLastest.mosStatus
this.dataForm.mosTemp = data.myBatteryInfoLastest.mosTemp
this.dataForm.batteryCycleTimes = data.myBatteryInfoLastest.batteryCycleTimes
this.dataForm.steadyStatus = data.myBatteryInfoLastest.steadyStatus
this.dataForm.cellVoltage = data.myBatteryInfoLastest.cellVoltage
this.dataForm.model = data.myBatteryInfoLastest.model
this.dataForm.manufacture = data.myBatteryInfoLastest.manufacture
this.dataForm.imei = data.myBatteryInfoLastest.imei
this.dataForm.imsi = data.myBatteryInfoLastest.imsi
this.dataForm.iccid = data.myBatteryInfoLastest.iccid
this.dataForm.trackerHardwareVersion = data.myBatteryInfoLastest.trackerHardwareVersion
this.dataForm.trackerSoftwareVersion = data.myBatteryInfoLastest.trackerSoftwareVersion
this.dataForm.reportreason = data.myBatteryInfoLastest.reportreason
this.dataForm.detstatus = data.myBatteryInfoLastest.detstatus
this.dataForm.csq = data.myBatteryInfoLastest.csq
this.dataForm.networkType = data.myBatteryInfoLastest.networkType
this.dataForm.locationMode = data.myBatteryInfoLastest.locationMode
this.dataForm.longitude = data.myBatteryInfoLastest.longitude
this.dataForm.longitudeDirection = data.myBatteryInfoLastest.longitudeDirection
this.dataForm.latitude = data.myBatteryInfoLastest.latitude
this.dataForm.latitudeDirection = data.myBatteryInfoLastest.latitudeDirection
this.dataForm.gpsSpeed = data.myBatteryInfoLastest.gpsSpeed
this.dataForm.gpsSignal = data.myBatteryInfoLastest.gpsSignal
this.dataForm.satelliteNum = data.myBatteryInfoLastest.satelliteNum
this.dataForm.accuracy = data.myBatteryInfoLastest.accuracy
this.dataForm.businessmode = data.myBatteryInfoLastest.businessmode
this.dataForm.flag = data.myBatteryInfoLastest.flag
this.dataForm.uploadTime = data.myBatteryInfoLastest.uploadTime
this.dataForm.createTime = data.myBatteryInfoLastest.createTime
this.dataForm.updateTime = data.myBatteryInfoLastest.updateTime
}
})
}
})
},
// 表单提交
dataFormSubmit () {
this.$refs['dataForm'].validate((valid) => {
if (valid) {
this.$http({
url: this.$http.adornUrl(`/maya/mybatteryinfolastest/${!this.dataForm.id ? 'save' : 'update'}`),
method: 'post',
data: this.$http.adornData({
'id': this.dataForm.id || undefined,
'batteryId': this.dataForm.batteryId,
'batteryKind': this.dataForm.batteryKind, // 提交电池类型
'batteryVoltage': this.dataForm.batteryVoltage,
'batteryCurrent': this.dataForm.batteryCurrent,
'batterySoc': this.dataForm.batterySoc,
'batteryHardVersion': this.dataForm.batteryHardVersion,
'batterySoftVersion': this.dataForm.batterySoftVersion,
'batteryWorkMode': this.dataForm.batteryWorkMode,
'batteryProtectCode': this.dataForm.batteryProtectCode,
'batteryErrorCode': this.dataForm.batteryErrorCode,
'batteryTemperatureMax': this.dataForm.batteryTemperatureMax,
'batteryTemperatureMin': this.dataForm.batteryTemperatureMin,
'batteryVoltageMax': this.dataForm.batteryVoltageMax,
'batteryVoltageMin': this.dataForm.batteryVoltageMin,
'mosStatus': this.dataForm.mosStatus,
'mosTemp': this.dataForm.mosTemp,
'batteryCycleTimes': this.dataForm.batteryCycleTimes,
'steadyStatus': this.dataForm.steadyStatus,
'cellVoltage': this.dataForm.cellVoltage,
'model': this.dataForm.model,
'manufacture': this.dataForm.manufacture,
'imei': this.dataForm.imei,
'imsi': this.dataForm.imsi,
'iccid': this.dataForm.iccid,
'trackerHardwareVersion': this.dataForm.trackerHardwareVersion,
'trackerSoftwareVersion': this.dataForm.trackerSoftwareVersion,
'reportreason': this.dataForm.reportreason,
'detstatus': this.dataForm.detstatus,
'csq': this.dataForm.csq,
'networkType': this.dataForm.networkType,
'locationMode': this.dataForm.locationMode,
'longitude': this.dataForm.longitude,
'longitudeDirection': this.dataForm.longitudeDirection,
'latitude': this.dataForm.latitude,
'latitudeDirection': this.dataForm.latitudeDirection,
'gpsSpeed': this.dataForm.gpsSpeed,
'gpsSignal': this.dataForm.gpsSignal,
'satelliteNum': this.dataForm.satelliteNum,
'accuracy': this.dataForm.accuracy,
'businessmode': this.dataForm.businessmode,
'flag': this.dataForm.flag,
'uploadTime': this.dataForm.uploadTime,
'createTime': this.dataForm.createTime,
'updateTime': this.dataForm.updateTime
})
}).then(({data}) => {
if (data && data.code === 0) {
this.$message({
message: '操作成功',
type: 'success',
duration: 1500,
onClose: () => {
this.visible = false
this.$emit('refreshDataList')
}
})
} else {
this.$message.error(data.msg)
}
})
}
})
}
}
}
</script>
<style scoped>
.custom-dialog >>> .el-dialog__body {
padding: 20px 30px;
max-height: 70vh;
overflow-y: auto;
}
.custom-dialog >>> .el-tabs--border-card {
box-shadow: none;
border: none;
}
.custom-dialog >>> .el-tabs__content {
padding: 15px;
}
</style>
优化此页面dataRule的提示方式，比如保护状态码的提示被故障状态码的输入框遮住了，
本文介绍了一种使用jQuery插件mbTooltip实现元素提示效果的方法。通过简单的配置即可为页面上的不同元素如按钮、输入框等添加自定义的提示信息。支持透明度、阴影、箭头等样式设置，并提供禁用及启用提示的功能。
扫一扫
41
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
