SQL去重技巧-优快云博客

有两个意义上的重复记录，一是完全重复的记录，也即所有字段均重复的记录，二是部分关键字段重复的记录，比如Name字段重复，而其他字段不一定重复或都重复可以忽略。

1、对于第一种重复，比较容易解决，使用

　　select distinct * from tableName

　　就可以得到无重复记录的结果集。

　　如果该表需要删除重复的记录(重复记录保留1条)，可以按以下方法删除

　　select distinct * into #Tmp from tableName

　　truncate table tableName

　　select * into tableName from #Tmp

　　drop table #Tmp

　　发生这种重复的原因是表设计不周产生的，增加唯一索引列即可解决。

　　2、这类重复问题通常要求保留重复记录中的第一条记录，操作方法如下

　　假设有重复的字段为Name,Address，要求得到这两个字段唯一的结果集

　　select identity(int,1,1) as autoID, * into #Tmp from tableName

　　select min(autoID) as autoID into #Tmp2 from #Tmp group by Name,autoID

　　select * from #Tmp where autoID in(select autoID from #tmp2)

　　最后一个select即得到了Name，Address不重复的结果集(但多了一个autoID字段，实际写时可以写在select子句中省去此列)

--按某一字段分组取最大(小)值所在行的数据
(爱新觉罗.毓华 2007-10-23于浙江杭州)
/*
数据如下：
name val memo
a    2   a2(a的第二个值)
a    1   a1--a的第一个值
a    3   a3:a的第三个值
b    1   b1--b的第一个值
b    3   b3:b的第三个值
b    2   b2b2b2b2
b    4   b4b4
b    5   b5b5b5b5b5
*/
--创建表并插入数据：
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a',    2,   'a2(a的第二个值)')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('b',    1,   'b1--b的第一个值')
insert into tb values('b',    3,   'b3:b的第三个值')
insert into tb values('b',    2,   'b2b2b2b2')
insert into tb values('b',    4,   'b4b4')
insert into tb values('b',    5,   'b5b5b5b5b5')
go

--一、按name分组取val最大的值所在行的数据。
--方法1：
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2：
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3：
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4：
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          3           a3:a的第三个值
b          5           b5b5b5b5b5
*/

--二、按name分组取val最小的值所在行的数据。
--方法1：
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2：
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3：
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4：
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
b          1           b1--b的第一个值
*/

--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          2           a2(a的第二个值)
b          1           b1--b的第一个值
*/

--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
b          5           b5b5b5b5b5
*/

--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
a          2           a2(a的第二个值)
b          1           b1--b的第一个值
b          2           b2b2b2b2
*/

--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          2           a2(a的第二个值)
a          3           a3:a的第三个值
b          4           b4b4
b          5           b5b5b5b5b5
*/
--七，如果整行数据有重复，所有的列都相同。
/*
数据如下：
name val memo
a    2   a2(a的第二个值)
a    1   a1--a的第一个值
a    1   a1--a的第一个值
a    3   a3:a的第三个值
a    3   a3:a的第三个值
b    1   b1--b的第一个值
b    3   b3:b的第三个值
b    2   b2b2b2b2
b    4   b4b4
b    5   b5b5b5b5b5
*/
--在sql server 2000中只能用一个临时表来解决，生成一个自增列，先对val取最大或最小，然后再通过自增列来取数据。
--创建表并插入数据：
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a',    2,   'a2(a的第二个值)')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('b',    1,   'b1--b的第一个值')
insert into tb values('b',    3,   'b3:b的第三个值')
insert into tb values('b',    2,   'b2b2b2b2')
insert into tb values('b',    4,   'b4b4')
insert into tb values('b',    5,   'b5b5b5b5b5')
go

select * , px = identity(int,1,1) into tmp from tb

select m.name,m.val,m.memo from
(
  select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) m where px = (select min(px) from
(
  select t.* from tmp t where val = (select min(val) from tmp where name = t.name)
) n where n.name = m.name)

drop table tb,tmp

/*
name       val         memo
---------- ----------- --------------------
a          1           a1--a的第一个值
b          1           b1--b的第一个值

(2 行受影响)
*/
--在sql server 2005中可以使用row_number函数，不需要使用临时表。
--创建表并插入数据：
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a',    2,   'a2(a的第二个值)')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('b',    1,   'b1--b的第一个值')
insert into tb values('b',    3,   'b3:b的第三个值')
insert into tb values('b',    2,   'b2b2b2b2')
insert into tb values('b',    4,   'b4b4')
insert into tb values('b',    5,   'b5b5b5b5b5')
go

select m.name,m.val,m.memo from
(
  select * , px = row_number() over(order by name , val) from tb
) m where px = (select min(px) from
(
  select * , px = row_number() over(order by name , val) from tb
) n where n.name = m.name)

drop table tb

/*
name       val         memo
---------- ----------- --------------------
a          1           a1--a的第一个值
b          1           b1--b的第一个值

(2 行受影响)
*/

--按某一字段分组取最大(小)值所在行的数据(2007-10-23于浙江杭州)
/*
数据如下：
name val memo
a    2   a2(a的第二个值)
a    1   a1--a的第一个值
a    3   a3:a的第三个值
b    1   b1--b的第一个值
b    3   b3:b的第三个值
b    2   b2b2b2b2
b    4   b4b4
b    5   b5b5b5b5b5
*/
--创建表并插入数据：
create table tb(name varchar(10),val int,memo varchar(20))
insert into tb values('a',    2,   'a2(a的第二个值)')
insert into tb values('a',    1,   'a1--a的第一个值')
insert into tb values('a',    3,   'a3:a的第三个值')
insert into tb values('b',    1,   'b1--b的第一个值')
insert into tb values('b',    3,   'b3:b的第三个值')
insert into tb values('b',    2,   'b2b2b2b2')
insert into tb values('b',    4,   'b4b4')
insert into tb values('b',    5,   'b5b5b5b5b5')
go

--一、按name分组取val最大的值所在行的数据。
--方法1：
select a.* from tb a where val = (select max(val) from tb where name = a.name) order by a.name
--方法2：
select a.* from tb a where not exists(select 1 from tb where name = a.name and val > a.val)
--方法3：
select a.* from tb a,(select name,max(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4：
select a.* from tb a inner join (select name , max(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          3           a3:a的第三个值
b          5           b5b5b5b5b5
*/

--二、按name分组取val最小的值所在行的数据。
--方法1：
select a.* from tb a where val = (select min(val) from tb where name = a.name) order by a.name
--方法2：
select a.* from tb a where not exists(select 1 from tb where name = a.name and val < a.val)
--方法3：
select a.* from tb a,(select name,min(val) val from tb group by name) b where a.name = b.name and a.val = b.val order by a.name
--方法4：
select a.* from tb a inner join (select name , min(val) val from tb group by name) b on a.name = b.name and a.val = b.val order by a.name
--方法5
select a.* from tb a where 1 > (select count(*) from tb where name = a.name and val < a.val) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
b          1           b1--b的第一个值
*/

--三、按name分组取第一次出现的行所在的数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          2           a2(a的第二个值)
b          1           b1--b的第一个值
*/

--四、按name分组随机取一条数据。
select a.* from tb a where val = (select top 1 val from tb where name = a.name order by newid()) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
b          5           b5b5b5b5b5
*/

--五、按name分组取最小的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val < a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val < a.val having Count(*) < 2) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          1           a1--a的第一个值
a          2           a2(a的第二个值)
b          1           b1--b的第一个值
b          2           b2b2b2b2
*/

--六、按name分组取最大的两个(N个)val
select a.* from tb a where 2 > (select count(*) from tb where name = a.name and val > a.val ) order by a.name,a.val
select a.* from tb a where val in (select top 2 val from tb where name=a.name order by val desc) order by a.name,a.val
select a.* from tb a where exists (select count(*) from tb where name = a.name and val > a.val having Count(*) < 2) order by a.name
/*
name       val         memo                 
---------- ----------- -------------------- 
a          2           a2(a的第二个值)
a          3           a3:a的第三个值
b          4           b4b4
b          5           b5b5b5b5b5
*/


declare @tb table(JobID int,jobCorporation int,JobCount int,JobStart datetime,JobBack int)
insert into @tb select 1,11,0,'2004-4-7',1 
insert into @tb select 2,11,0,'2005-4-4',1 
insert into @tb select 3,22,0,'2005-4-4',1 
insert into @tb select 4,22,0,'2005-4-4',1 
insert into @tb select 5,22,0,'2005-4-4',1

select * from @tb t where not exists(
select 1 from @tb where jobCorporation=t.jobCorporation and JobID<t.JobID
)