如何自动执行 Microsoft Word 执行邮件合并使用 Visual c + + 和 MFC

生成自动化示例

1. 请按照步骤 1 到 12 中下面的 Microsoft 知识库文章：
   178749 (http://support.microsoft.com/kb/178749/ ) 如何创建自动化项目使用 MFC 和类型库
   注意在步骤 9，选择正确的类型库中的您的 Word 版本。在 $ 查找上，请参阅下面的引用部分有关的信息，以在正确类型库。
2. 包含语句的 stdafx.h 文件后，在 $ AutoProjectDlg.cpp 中添加 包含 语句 （msword8.h、 msword9.h 或 msword.h） 创建的头文件。为 Word 97 的一个例子是：

      #include "stdafx.h"
      #include "msword8.h"
   					

3. 将自动化代码添加到 CAutoProjectDlg::OnRun 方法，以使其显示，如下所示：

   void CAutoProjectDlg::OnRun()
   {
   	_Application oWord;
   	Documents oDocs;
   	_Document oDoc;
   	Selection oSelection;
   	Paragraphs oParagraphs;
   	Tables oTables;
   	Table oTable;
   	Range oRange;
   	Columns oColumns;
   	Column oColumn;
   	Rows oRows;
   	Row oRow;
   
   	Cells oCells;
   	Cell oCell; 
   	Shading oShading;
   	Hyperlinks oHyperlinks;
   	MailMerge oMailMerge;
   	MailMergeFields oMailMergeFields;
   	COleVariant vtOptional((long)DISP_E_PARAMNOTFOUND,VT_ERROR),
   		        vtTrue((short)TRUE),
   				vtFalse((short)FALSE);
   	CString StrToAdd;
   
   	// Create an instance of Word
   	if (!oWord.CreateDispatch("Word.Application")) {
   		AfxMessageBox("Word failed to start!");
   	} else {
   	// Set the visible property
   	oWord.SetVisible(TRUE);
   	// Add a new document
   	oDocs = oWord.GetDocuments();
   	oDoc = oDocs.Add(vtOptional,vtOptional);
   
   	CreateMailMergeDataFile(&oWord,&oDoc);
   	// Add the address header
   
   	StrToAdd = "State University/r/nElectrical Engineering " / 
   		       "Department";
   	oSelection = oWord.GetSelection();
   
   	oParagraphs = oSelection.GetParagraphs();
   	oParagraphs.SetAlignment(1);  // 1 = wdAlignParagraphCenter  
   	oSelection.TypeText(StrToAdd);
   
   	InsertLines(&oSelection,4);
   
   	oParagraphs.SetAlignment(0);  // 0 = wdAlignParagraphLeft
   	oMailMerge = oDoc.GetMailMerge();
   	oMailMergeFields = oMailMerge.GetFields();
   	oMailMergeFields.Add(oSelection.GetRange(),"FirstName");
   	oSelection.TypeText(" ");
   	oMailMergeFields.Add(oSelection.GetRange(),"LastName");
   	oSelection.TypeParagraph();
   	oMailMergeFields.Add(oSelection.GetRange(),"Address");
   	oSelection.TypeParagraph();
   	oMailMergeFields.Add(oSelection.GetRange(),"CityStateZip");
   
   	InsertLines(&oSelection,4);
   	// Set the paragraph alignment to Right justified
   	oParagraphs = oSelection.GetParagraphs();
   
   	oParagraphs.SetAlignment(2);  // 2 = wdAlignParagraphRight
   	// Insert the current date
   	oSelection.InsertDateTime(COleVariant("dddd, MMMM dd, yyyy"),/ 
   		 vtFalse,vtOptional);
   
   	InsertLines(&oSelection,2);
   
   	// Reset the justification to Justify
   
   	oParagraphs = oSelection.GetParagraphs();
   	oParagraphs.SetAlignment(3);  // 3 = wdAlignParagraphJustify
   
   	oSelection.TypeText("Dear ");
   	oMailMergeFields.Add(oSelection.GetRange(),"FirstName");
   	oSelection.TypeText(",");
   
   	InsertLines(&oSelection,2);
   
   	// Add the body of the message
   	StrToAdd = "Thank you for your recent request for next " / 
   	       "semester's class schedule for the Electrical " / 
   	       "Engineering Department.  Enclosed with this letter " / 
   	       "is a booklet containing all the classes offered " / 
   	       "next semester at State University.  Several new " / 
   	       "classes will be offered in the Electrical " / 
      	       "Engineering Department next semester.  These " / 
   	       "classes are listed below.";
   	oSelection.TypeText(StrToAdd);
   
   	InsertLines(&oSelection,2);
   	
   	// Add a new table with 9 rows and 4 columns
   	oRange = oSelection.GetRange();
   	oTables = oDoc.GetTables();
   	oTable = oTables.Add(oRange,9,4);
   
   	// Set the width of each column
   	oColumns = oTable.GetColumns();
   	oColumn = oColumns.Item(1);
   	oColumn.SetWidth(51.0,0);  // 0 = wdAdjustNone
   	oColumn = oColumns.Item(2);
   	oColumn.SetWidth(198.0,0);  // 0 = wdAdjustNone
   	oColumn = oColumns.Item(3);
   	oColumn.SetWidth(100.0,0);  // 0 = wdAdjustNone
   	oColumn = oColumns.Item(4);
   	oColumn.SetWidth(111.0,0);  // 0 = wdAdjustNone
   
   	// Set the shading for row 1 to wdGray25
   	oRows = oTable.GetRows();
   	oRow = oRows.Item(1);
   	oCells = oRow.GetCells();
   	oShading = oCells.GetShading();
   	oShading.SetBackgroundPatternColorIndex(16); // 16 = wdGray25
   
   	// Turn on BOLD for the first row
   	oRange = oRow.GetRange();
   	oRange.SetBold(TRUE);
   
   	// Set the alignment for cell (1,1) to center
   	oCell = oTable.Cell(1,1);
   	oRange = oCell.GetRange();
   	oParagraphs = oRange.GetParagraphs();
   	oParagraphs.SetAlignment(1);  // 1 = wdAlignParagraphCenter
   
   	// Fill in the class schedule data
   	FillRow(&oTable,1,"Class Number","Class Name",/ 
   		"Class Time","Instructor");	
   	FillRow(&oTable,2, "EE220", "Introduction to Electronics II", / 
   		"1:00-2:00 M,W,F", "Dr. Jensen");
   	FillRow(&oTable,3, "EE230", "Electromagnetic Field Theory I", / 
   		"10:00-11:30 T,T", "Dr. Crump");
   	FillRow(&oTable,4, "EE300", "Feedback Control Systems", / 
   		"9:00-10:00 M,W,F", "Dr. Murdy");
   	FillRow(&oTable,5, "EE325", "Advanced Digital Design", / 
   		"9:00-10:30 T,T", "Dr. Alley");
   	FillRow(&oTable,6, "EE350", "Advanced Communication Systems", / 
   		"9:00-10:30 T,T", "Dr. Taylor");
   	FillRow(&oTable,7, "EE400", "Advanced Microwave Theory", / 
   		"1:00-2:30 T,T", "Dr. Lee");
   	FillRow(&oTable,8, "EE450", "Plasma Theory", / 
   		"1:00-2:00 M,W,F", "Dr. Davis");
   	FillRow(&oTable,9, "EE500", "Principles of VLSI Design", / 
   		"3:00-4:00 M,W,F", "Dr. Ellison");
   
   	// Go to the end of the document
   	oSelection.GoTo(COleVariant((short)3), // 3 = wdGoToLine
   	COleVariant((short)-1),vtOptional,vtOptional);  // -1 = wdGoToLast
   
   	InsertLines(&oSelection,2);
   
   	// Add closing text
   	StrToAdd = "For additional information regarding the " / 
                "Department of Electrical Engineering, " / 
                "you can visit our website at ";
   	oSelection.TypeText(StrToAdd);
   
   	// Add a hyperlink to the homepage
   	oHyperlinks = oSelection.GetHyperlinks();
   	oHyperlinks.Add(oSelection.GetRange(),/ 
   		COleVariant("http://www.ee.stateu.tld"),vtOptional);
   
   	// Finish adding closing text
   	StrToAdd = ".  Thank you for your interest in the classes " / 
                "offered in the Department of Electrical " / 
                "Engineering.  If you have any other questions, " / 
                "please feel free to give us a call at (999) " / 
                "555-1212./r/n/r/n" / 
                "Sincerely,/r/n/r/n" / 
                "Kathryn M. Hinsch/r/n" / 
                "Department of Electrical Engineering/r/n";
   	oSelection.TypeText(StrToAdd);
   
   	// Perform mail merge
   	oMailMerge.SetDestination(0); // 0 = wdSendToNewDocument
   	oMailMerge.Execute(vtFalse);
   
   	// Close the original form document
   	oDoc.SetSaved(TRUE);
   	oDoc.Close(vtFalse,vtOptional,vtOptional);
     
   	}
   }
   					

4. 将以下代码上方插入指定的代码中在第 3 步：

   void InsertLines(Selection *pSelection, int NumLines)
   {
   	int iCount;
   
   	// Insert NumLines blank lines
   	for (iCount = 1; iCount <= NumLines; iCount++)
   		pSelection->TypeParagraph();
   }
   
   void FillRow(Table *pTable,int Row, CString Text1, 
   			 CString Text2, CString Text3, CString Text4)
   {
   	Cell oCell;
   	Range oRange;
   
   	// Insert data into the specific cell
   	oCell = pTable->Cell(Row,1);
   	oRange = oCell.GetRange();
   	oRange.InsertAfter(Text1);
   	oCell = pTable->Cell(Row,2);
   	oRange = oCell.GetRange();
   	oRange.InsertAfter(Text2);
   	oCell = pTable->Cell(Row,3);
   	oRange = oCell.GetRange();
   	oRange.InsertAfter(Text3);
   	oCell = pTable->Cell(Row,4);
   	oRange = oCell.GetRange();
   	oRange.InsertAfter(Text4);
   
   }
   
   void CreateMailMergeDataFile(_Application *pApp,_Document *pDoc)
   {
     _Document oDataDoc;
     MailMerge oMailMerge;
     Documents oDocs;
     Tables oTables;
     Table oTable;
     Rows oRows;
     int iCount;
     COleVariant vtOptional((long)DISP_E_PARAMNOTFOUND,VT_ERROR),
   				vtFalse((short)FALSE);
     
     // Create a data source at C:/DataDoc.doc containing the field data
     oMailMerge = pDoc->GetMailMerge();
     oMailMerge.CreateDataSource(COleVariant("C://DataDoc.doc"), / 
           vtOptional,vtOptional, / 
           COleVariant("FirstName, LastName, Address,CityStateZip"),/ 
           vtOptional, vtOptional,vtOptional,vtOptional,vtOptional);
     // Open the file to insert data
     oDocs = pApp->GetDocuments();
     oDataDoc = oDocs.Open(COleVariant("C://DataDoc.doc"), / 
          vtOptional,vtOptional,vtOptional,vtOptional,/ 
          vtOptional,vtOptional,vtOptional,vtOptional,/ 
          vtOptional);
     oTables = oDataDoc.GetTables();
     oTable = oTables.Item(1);
     oRows = oTable.GetRows();
     for (iCount=1; iCount<=2; iCount++)  
       oRows.Add(vtOptional);
   
     // Fill in the data
     FillRow(&oTable, 2, "Steve", "DeBroux", / 
           "4567 Main Street", "Buffalo, NY  98052");
     FillRow(&oTable, 3, "Jan", "Miksovsky", / 
           "1234 5th Street", "Charlotte, NC  98765");
     FillRow(&oTable, 4, "Brian", "Valentine", / 
           "12348 78th Street  Apt. 214", "Lubbock, TX  25874");
     // Save and close the file
     oDataDoc.Save();
     oDataDoc.Close(vtFalse,vtOptional,vtOptional);
   }
   					

5. 编译并运行您的程序。单击 运行 按钮，Microsoft Word 应该开始和显示示例字母。请注意某些方法具有与 Word 2000 和 Word 2002 更改。有关这些更改的详细信息，请参阅"参考"部分。