Flume - Too many unapproved licenses: 1

本文详细阐述了如何解决Maven打包过程中遇到的Apache Rat插件检查失败的问题,通过在配置文件和Java类中添加特定的版权声明内容来避免误报,并解释了相关Maven插件的使用方法。
[ERROR] Failed to execute goal org.apache.rat:apache-rat-plugin:0.7:check (verify.rat) on project flume-ng-elasticsearch-sink: Too many unapproved licenses: 1 -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]

[ERROR] After correcting the problems, you can resume the build with the command

[ERROR] mvn <goals> -rf :flume-ng-elasticsearch-sink

重点是上述红色标记的地方,因为最近项目要从nginx获取数据实时导入到elasticsearch中,flume自带的elasticsearch-sink不能满足我们要求,所以要自定义。在里面flume-ng-elasticsearch-sink中新增了一些类和测试配置文件,本想重新打包发布的。可以一maven打包就报上述异常。


解决办法:

配置文件第一行加如下内容:

#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements.  See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership.  The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

java类第一行加如下内容:
/*
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 * http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 */


请看根目录的pom配置:

        <groupId>org.apache.rat</groupId>
          <artifactId>apache-rat-plugin</artifactId>
          <version>0.7</version>
          <executions>
            <execution>
              <id>verify.rat</id>
              <phase>verify</phase>
              <goals>
                <goal>check</goal>
              </goals>
              <configuration>
                <excludes>
                  <exclude>**/.idea/</exclude>
                  <exclude>**/*.iml</exclude>
                  <exclude>**/nb-configuration.xml</exclude>
                  <exclude>.git/</exclude>
                  <exclude>patchprocess/</exclude>
                  <exclude>.gitignore</exclude>
                  <!-- ASF jenkins box puts the Maven repo in our root directory. -->
                  <exclude>.repository/</exclude>
                  <exclude>**/*.diff</exclude>
                  <exclude>**/*.patch</exclude>
                  <exclude>**/*.avsc</exclude>
                  <exclude>**/*.avro</exclude>
                  <exclude>**/docs/**</exclude>
                  <exclude>**/test/resources/**</exclude>
                  <exclude>**/.settings/*</exclude>
                  <exclude>**/.classpath</exclude>
                  <exclude>**/.project</exclude>
                  <exclude>**/target/**</exclude>
                  <exclude>**/derby.log</exclude>
                  <exclude>**/metastore_db/</exclude>
                </excludes>
              </configuration>
            </execution>
          </executions>



注:上述要加的内容,大家最好在源码里面找,java类的,可以在源码中任意一个java类中找,配置文件的,可以在源码中任意一个配置文件里面拷贝出来。

<think>我们正在解决的是:运行`flume-ngversion`时出现`CommandNotFoundException`错误,原因是未找到`flume-env.ps1`。根据引用[1]和引用[3]中的错误信息,以及用户之前的问题,我们可以推断:1.用户可能在Windows环境下运行Flume。2.错误信息中提到了`flume-ng.ps1`脚本,这是Flume在Windows上的启动脚本。3.错误可能是由于`flume-env.ps1`配置文件未正确设置或未被找到。回顾之前的解决方案,我们配置了`flume-env.ps1`并设置了`JAVA_HOME`等环境变量。但是,当运行`version`命令时,脚本可能因为某些原因(比如配置文件路径问题)而无法正确加载。在`flume-ng.ps1`脚本中,有一段代码用于加载`flume-env.ps1`:```powershellif("$conf"-ne""){Write-Host"Sourcingenvironmentconfigurationscript$conf\flume-env.ps1"if(Test-path"$conf\flume-env.ps1"){."$conf\flume-env.ps1"}else{Write-Host"WARN:Didnotfind$conf\flume-env.ps1"}}else{Write-Host"WARN:Noconfigurationdirectoryfound!Use--conf<dir>toset."}```注意:在运行`version`命令时,用户可能没有指定`-conf`参数,因此`$conf`变量为空,导致没有加载任何`flume-env.ps1`文件。而脚本中设置`$conf`默认值为`$FLUME_HOME\conf`是在用户没有指定且环境变量`FLUME_HOME`存在的情况下。但是,如果用户没有设置`FLUME_HOME`环境变量,那么`$conf`就会为空。因此,我们需要确保:1.用户运行命令时指定了`-conf`参数,指向`conf`目录(该目录下应有`flume-env.ps1`文件)。2.或者,设置`FLUME_HOME`环境变量,这样脚本会自动将`$conf`设置为`$env:FLUME_HOME\conf`。然而,在运行`version`命令时,用户可能不会指定`-conf`。因此,我们可以修改脚本,使其在没有指定`-conf`且`$env:FLUME_HOME`存在时,自动使用`$env:FLUME_HOME\conf`作为配置目录。但是,用户报告的错误是`CommandNotFoundException`,这通常表示PowerShell无法识别某个命令(可能是由于Java路径问题)。因此,即使没有加载`flume-env.ps1`,只要Java在系统PATH中,`version`命令应该也能运行。所以,更可能的原因是:-在没有`flume-env.ps1`的情况下,脚本依赖的Java环境变量(如`JAVA_HOME`)没有设置,而系统PATH中也没有Java。因此,解决方案有两个方向:方向一:确保`flume-env.ps1`被加载-在运行命令时指定`-conf`参数,例如:```powershell.\flume-ng.ps1version-conf../conf```-或者,设置`FLUME_HOME`环境变量,指向Flume的安装目录。方向二:确保系统环境变量中已经正确设置了Java的路径(即无需依赖`flume-env.ps1`)-Java的`bin`目录添加到系统PATH中。但是,根据用户之前的问题,我们已经在`flume-env.ps1`中设置了`JAVA_HOME`和`PATH`。所以,如果这个配置文件没有被加载,那么Java环境可能就不存在。因此,我们重点确保`flume-env.ps1`被加载。修改脚本逻辑:即使没有指定`-conf`,我们也尝试使用默认位置(即`$PSScriptRoot\..\conf`)来加载`flume-env.ps1`。然而,我们注意到在脚本中已经有这样的逻辑:```powershell$FlumeHome=$nullif($env:FLUME_HOME){$FlumeHome=$env:FLUME_HOME}else{$ScriptPath=Split-Path-Parent$MyInvocation.MyCommand.Path$FlumeHome=Split-Path-Parent$ScriptPath}if("$conf"-eq""){if(Test-path("$FlumeHome\conf")){$conf="$FlumeHome\conf"Write-Host"WARN:Configdirectorynotset.Defaultingto$conf"}}```所以,如果用户没有设置`FLUME_HOME`,脚本会通过当前脚本路径计算出`FlumeHome`(即`bin`目录的父目录),然后设置`$conf`为`$FlumeHome\conf`。那么,为什么还会出现找不到`flume-env.ps1`的警告呢?可能的原因:1.`$FlumeHome\conf`目录不存在。2.虽然存在,但里面没有`flume-env.ps1`文件。因此,我们需要检查:-Flume安装目录下是否有`conf`目录?-`conf`目录中是否有`flume-env.ps1`文件?如果没有,我们可以从模板创建一个:-复制`flume-env.ps1.template`为`flume-env.ps1`。所以,具体步骤:步骤1:检查Flume安装目录下的`conf`子目录是否存在,并确保其中有`flume-env.ps1`文件。步骤2:如果没有,则创建该文件(从模板复制并修改)。步骤3:在`flume-env.ps1`中设置`JAVA_HOME`和`PATH`(如之前所述)。步骤4:确保脚本能正确找到这个配置文件。另外,`CommandNotFoundException`错误也可能是由于`java`命令不在PATH中,且`flume-env.ps1`中设置的`PATH`没有被正确加载。因此,我们可以在`flume-ng.ps1`脚本中显式地添加`JAVA_HOME/bin`到PATH,即使`flume-env.ps1`没有被加载,我们也可以尝试使用默认的Java。但是,修改脚本可能不是用户想要的,因为用户可能没有权限或者不想修改分发版本的脚本。因此,我们给用户提供以下解决方案:解决方案:1.确保Flume的`conf`目录下有`flume-env.ps1`文件。-进入Flume安装目录下的`conf`目录(例如:`E:\apache-flume-1.11.0-bin\conf`)。-检查是否存在`flume-env.ps1`文件。如果不存在,复制`flume-env.ps1.template`并重命名为`flume-env.ps1`。2.编辑`flume-env.ps1`文件,设置Java环境:```powershell$env:JAVA_HOME="C:\ProgramFiles\Java\jdk1.8.0_451"#替换为你的实际路径$env:JAVA_OPTS="-Xmx512m"#将Java的bin目录添加到PATH$env:Path="$env:JAVA_HOME\bin;"+$env:Path```3.如果上述步骤完成后,运行`version`命令仍然出现错误,尝试在运行命令时显式指定`-conf`参数:```powershell.\flume-ng.ps1version-conf../conf```4.如果还是不行,可以尝试在运行脚本之前设置`FLUME_HOME`环境变量(指向Flume的安装目录):```powershell$env:FLUME_HOME="E:\apache-flume-1.11.0-bin".\flume-ng.ps1version```5.作为备用方案,确保系统环境变量中已经设置了`JAVA_HOME`和`PATH`(包含Java的bin目录),这样即使不加载`flume-env.ps1`,Java也是可用的。6.如果问题仍然存在,可能是脚本中的路径计算有误。我们可以临时修改脚本,在开头添加调试信息,打印`$FlumeHome`和`$conf`的值,以便确认路径是否正确。修改`flume-ng.ps1`脚本(在开头部分添加):```powershellWrite-Host"FlumeHome:$FlumeHome"Write-Host"conf:$conf"```然后再次运行,观察输出的路径是否指向正确的`conf`目录。通过以上步骤,应该可以解决`version`命令运行时报错的问题。注意:`CommandNotFoundException`错误通常是PowerShell无法找到某个命令(比如`java`命令),所以核心还是确保Java可执行文件在PATH中。</think>### 解决 Flume version 命令的 CommandNotFoundException 错误 #### 问题原因分析 该错误表明 Flume 无法找到 `flume-env.ps1` 配置文件,核心原因是: 1. **配置文件路径错误**:`flume-env.ps1` 未放在正确的 `conf` 目录中 2. **环境变量未生效**:`FLUME_HOME` 或 `JAVA_HOME` 配置不正确 3. **路径空格问题**:Flume 安装路径包含空格导致路径解析失败 4. **权限问题**:PowerShell 执行策略限制脚本运行 --- ### 解决方案步骤 #### 1. 验证配置文件位置 确保 `flume-env.ps1` 位于正确位置: ```powershell # 正确路径应为 Flume 安装目录下的 conf 文件夹 E:\apache-flume-1.11.0-bin\conf\flume-env.ps1 ``` #### 2. 修复 flume-env.ps1 配置 编辑 `conf/flume-env.ps1` 文件,添加以下内容: ```powershell # 必须设置 FLUME_HOME $env:FLUME_HOME = "E:\apache-flume-1.11.0-bin" # 设置 JAVA_HOME(替换为你的实际路径) $env:JAVA_HOME = "C:\Program Files\Java\jdk1.8.0_451" # 设置 Java 选项 $env:JAVA_OPTS = "-Xmx512m" # 确保 Java 在 PATH 中 $env:Path = "$env:JAVA_HOME\bin;" + $env:Path ``` #### 3. 处理路径空格问题(关键) 如果路径包含空格,使用双引号包裹: ```powershell # 正确写法 $env:FLUME_HOME = "`"E:\Program Files\apache-flume-1.11.0-bin`"" $env:JAVA_HOME = "`"C:\Program Files\Java\jdk1.8.0_451`"" ``` #### 4. 修改 PowerShell 执行策略 以管理员身份运行 PowerShell: ```powershell Set-ExecutionPolicy RemoteSigned -Force ``` #### 5. 验证修复效果 ```powershell cd E:\apache-flume-1.11.0-bin\bin .\flume-ng.ps1 version ``` ✅ 成功标志:显示 Flume 版本信息,无 CommandNotFoundException 错误 --- ### 错误排查技巧 1. **添加调试信息**:在 `flume-ng.ps1` 开头添加: ```powershell Write-Host "FLUME_HOME: $env:FLUME_HOME" Write-Host "JAVA_HOME: $env:JAVA_HOME" Write-Host "当前路径: $PWD" ``` 2. **手动验证路径**: ```powershell Test-Path "$env:FLUME_HOME\conf\flume-env.ps1" ``` > **关键提示**:Flume 在 Windows 下对路径敏感,确保所有路径都使用**英文双引号包裹**,特别是包含空格时[^1]。`FLUME_HOME` 必须指向 Flume 安装的根目录,而非 bin 目录[^3]。
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值