虚拟机上安装SOLARIS 10

最新推荐文章于 2024-07-14 12:39:10 发布

原创最新推荐文章于 2024-07-14 12:39:10 发布 · 247 阅读

0 ·

CC 4.0 BY-SA版权

文章标签：

#运维 #操作系统

本文详细介绍了在使用VMware虚拟机时，遇到Solaris10 64位操作系统与32位虚拟机配置不兼容的问题，并提供了解决方法，包括修改虚拟机设置和启动参数来确保64位客操作系统正常运行。

我下面要安装的操作系统是：[SUN的UNIX操作系统solaris.10.for.x86].Solaris.10.sol-10-GA-x86-dvd-iso
[color=darkred]首先：我安装在Solaris10上，VMware出现这样的提示：[/color]You are running a 64-bit guest operating system, but the virtual machine is configured to run a 32-bit operating system. To ensure that a 64-bit guest operating system will function correctly you must:
1. Power off this virtual machine.
2. Change the guest operating system type to a 64-bit operating system in virtual machine settings.
[color=darkred]然后，我安装在Solaris10-64bit上，VMware出现这样的提示：[/color]*** Virtual machine kernel stack fault (hardware reset) ***
The virtual machine just suffered a stack fault in kernel mode. On a real computer, this would amount to a reset of the processor. It can be caused by an incorrect configuration of the virtual machine, a bug in the operating system, or a problem in the VMware Workstation software. Press OK to reboot virtual machine or Cancel to shut it down.
[color=darkred]最后，我在启动时快速输入b kernel/unix后，两个虚拟机都可以正常启动了。[/color]