Android的Bitmap类中常用方法

Android的Bitmap类中常用方法

原创  2014年05月27日 22:56:04
  • 2782
boolean compress(Bitmap.CompressFormat format, int quality, OutputStream stream)
Write a compressed version of the bitmap to the specified outputstream.(压缩图片以特定格式输出到输出流)
Bitmap copy(Bitmap.Config config, boolean isMutable)
Tries to make a new bitmap based on the dimensions of this bitmap, setting the new bitmap's config to the one specified, and then copying this bitmap's pixels into the new bitmap.(复制bitmap,可以指定所需复制的配置信息以及是否允许被修改)
void copyPixelsFromBuffer(Buffer src)

Copy the pixels from the buffer, beginning at the current position, overwriting the bitmap's pixels.

void copyPixelsToBuffer(Buffer dst)

Copy the bitmap's pixels into the specified buffer (allocated by the caller).

static Bitmap createBitmap(DisplayMetrics display, int[] colors, int width, int height, Bitmap.Config config)
Returns a immutable可变的 bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array.
static Bitmap createBitmap(DisplayMetrics display, int[] colors, int offset, int stride, int width, int height, Bitmap.Config config)
Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array.
static Bitmap createBitmap(Bitmap source, int x, int y, int width, int height)
Returns an immutable bitmap from the specified subset of the source bitmap.
static Bitmap createBitmap(Bitmap src)
Returns an immutable bitmap from the source bitmap.(对原图的复制)
static Bitmap createBitmap(DisplayMetrics display, int width, int height, Bitmap.Config config)
Returns a mutable bitmap with the specified width and height.
static Bitmap createBitmap(Bitmap source, int x, int y, int width, int height, Matrix m, boolean filter)
Returns an immutable bitmap from subset of the source bitmap, transformed by the optional matrix.
static Bitmap createBitmap(int width, int height, Bitmap.Config config)
Returns a mutable bitmap with the specified width and height.
static Bitmap createBitmap(int[] colors, int offset, int stride, int width, int height, Bitmap.Config config)
Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array.
static Bitmap createBitmap(int[] colors, int width, int height, Bitmap.Config config)
Returns a immutable bitmap with the specified width and height, with each pixel value set to the corresponding value in the colors array.
static Bitmap createScaledBitmap(Bitmap src, int dstWidth, int dstHeight, boolean filter)
Creates a new bitmap, scaled from an existing bitmap, when possible.(将原有的图按比例缩放保存)
int describeContents()
No special parcel contents.
void eraseColor(int c)
Fills the bitmap's pixels with the specified  Color.
Bitmap extractAlpha()
Returns a new bitmap that captures the alpha values of the original.
Bitmap extractAlpha(Paint paint, int[] offsetXY)
Returns a new bitmap that captures the alpha values of the original.
final int getAllocationByteCount()
Returns the size of the allocated memory used to store this bitmap's pixels.
final int getByteCount()
Returns the minimum number of bytes that can be used to store this bitmap's pixels.
final Bitmap.Config getConfig()
If the bitmap's internal config is in one of the public formats, return that config, otherwise return null.(返回图片配置信息)
int getDensity()

Returns the density for this bitmap.

int getGenerationId()
Returns the generation ID of this bitmap.
final int getHeight()
Returns the bitmap's height
byte[] getNinePatchChunk()
Returns an optional array of private data, used by the UI system for some bitmaps.
int getPixel(int x, int y)
Returns the Color at the specified location.
void getPixels(int[] pixels, int offset, int stride, int x, int y, int width, int height)
Returns in pixels[] a copy of the data in the bitmap.
final int getRowBytes()
Return the number of bytes between rows in the bitmap's pixels.
int getScaledHeight(DisplayMetrics metrics)
Convenience for calling  getScaledHeight(int) with the target density of the given  DisplayMetrics.
int getScaledHeight(int targetDensity)
Convenience method that returns the height of this bitmap divided by the density scale factor.
int getScaledHeight(Canvas canvas)
Convenience for calling  getScaledHeight(int) with the target density of the given  Canvas.
int getScaledWidth(int targetDensity)
Convenience method that returns the width of this bitmap divided by the density scale factor.
int getScaledWidth(DisplayMetrics metrics)
Convenience for calling  getScaledWidth(int) with the target density of the given  DisplayMetrics.
int getScaledWidth(Canvas canvas)
Convenience for calling  getScaledWidth(int) with the target density of the given  Canvas.
final int getWidth()
Returns the bitmap's width
final boolean hasAlpha()
Returns true if the bitmap's config supports per-pixel alpha, and if the pixels may contain non-opaque alpha values.
final boolean hasMipMap()
Indicates whether the renderer responsible for drawing this bitmap should attempt to use mipmaps when this bitmap is drawn scaled down.
final boolean isMutable()
Returns true if the bitmap is marked as mutable可变的 (i.e. can be drawn into)
final boolean isPremultiplied()

Indicates whether pixels stored in this bitmaps are stored pre-multiplied.

final boolean isRecycled()
Returns true if this bitmap has been recycled.
void prepareToDraw()
Rebuilds any caches associated with the bitmap that are used for drawing it.
void reconfigure(int width, int height, Bitmap.Config config)

Modifies the bitmap to have a specified width, height, and Bitmap.Config, without affecting the underlying allocation backing the bitmap.

void recycle()
Free the native object associated with this bitmap, and clear the reference to the pixel data.
boolean sameAs(Bitmap other)
Given another bitmap, return true if it has the same dimensions, config, and pixel data as this bitmap.
void setConfig(Bitmap.Config config)

Convenience method for calling reconfigure(int, int, Config) with the current height and width.

void setDensity(int density)

Specifies the density for this bitmap.

void setHasAlpha(boolean hasAlpha)
Tell the bitmap if all of the pixels are known to be opaque (false) or if some of the pixels may contain non-opaque alpha values (true).
final void setHasMipMap(boolean hasMipMap)
Set a hint for the renderer responsible for drawing this bitmap indicating that it should attempt to use mipmaps when this bitmap is drawn scaled down.
void setHeight(int height)

Convenience method for calling reconfigure(int, int, Config) with the current width and config.

void setPixel(int x, int y, int color)

Write the specified Color into the bitmap (assuming it is mutable) at the x,y coordinate.

void setPixels(int[] pixels, int offset, int stride, int x, int y, int width, int height)

Replace pixels in the bitmap with the colors in the array.

final void setPremultiplied(boolean premultiplied)
Sets whether the bitmap should treat its data as pre-multiplied.
void setWidth(int width)

Convenience method for calling reconfigure(int, int, Config) with the current height and config.

void writeToParcel(Parcel p, int flags)
Write the bitmap and its pixels to the parcel.

 

高能物理相关软件 国内高能物理实验背景     研究物质最深层次结构及相互作用的前沿基础科学。 现代高能物理实验的要素    实例源 、 探测器、   电子学、  触发 DAQ、  原始数据、 刻度、重建 、物理分析、  成果  。 离线软件的地位和作用。    是硬件设备和物理学家的桥梁,是从数据到物理成果转化中的关键和重要的环节。 高能物理实验及其特点 独一无二性,实验规模越来越大,努力省钱(使用 阅读详情

相关推荐

nmap、X-Scan漏洞扫描和Metasploit中用永恒之蓝漏洞入侵靶机并上传冰河

利用nmap、X-Scan扫描靶机的漏洞,在Metasploit中用扫描出的永恒之蓝漏洞入侵靶机,建立连接后上传冰河木马控制靶机,最后用冰河陷阱清除靶机的冰河木马,记一次完整的入侵控制实验。

m0_59302403的博客 4405

Android开发笔记(九十七)图片的特效处理

图片特效用到的函数 本文讲述的图片特效处理包括:怀旧、光照、光晕、底片、浮雕、模糊、锐化、黑白、冰冻、素描,所有这些特效都是基于一定的算法,对图像每个点的RGB值进行计算,并汇总所有点的计算结果生成新图片。 特效处理主要用到Bitmap类的三个方法: createBitmap : 创建一张新图片。 getPixels : 从指定图片中获取所有点的像素数组。 setPixels :

aqi00的博客 4910

硬核入门!Python爬虫实战:爬取豆瓣读书TOP250,书名+评分+简介,一键生成精美Excel书单(2026避坑版)

通过这个实战,你不仅获得了一份珍贵的豆瓣TOP250书单HTTP请求与响应的本质。HTML解析的核心技巧。反爬虫的基本应对策略。数据清洗与存储的完整流程。爬虫是通往数据世界的一把钥匙。现在,钥匙在你手中,去探索更多有趣的数据吧!

专注于Python爬虫开发,分享爬虫技巧、项目实战与反爬经验,使用Scrapy、BeautifulSoup等工具,解决数据抓取难题。 544

Android 利用setpixels设置单色位图

1.创建纯白色位图 Bitmap bm1 = Bitmap.createBitmap(picw, pich, Bitmap.Config.ARGB_8888); int[] pix = new int[picw * pich]; for (int y = 0; y < pich; y++)

Androider的专栏 1万+

【DaVinci Configurator专题】-5-通过Data Mapping自动创建CAN信号关联的Port并添加到APP SWC

目录 1 导入CAN Matrix变更后的Arxml文件 2 自动创建CAN信号关联的APP Port 3 CAN信号与App SWC的接口映射/连接 4 结尾 <--返回「实战篇」博文-总目录--> <--返回「Autosar从入门到精通-实战篇」专栏主页--> 关键词: DaVinci Developer DaVinci Configurator Pro ARXML AUTOSAR System Description Network Explorer 1

「汽车电子助手」的博客 5128

STM32入门教程:WiFi通信

第四步:初始化串口 在生成的代码中,您可以找到一个名为 "USARTx_Init" 的函数,其中 "x" 是您选择的串口号。然后,我们使用 "AT+CIPSEND" 命令发送UDP数据,接收到服务器的回复,并在终端上显示收到的数据。在配置向导中,您可以选择启用USART串口功能,并根据您的硬件连接,将串口设置为与WiFi模块连接的串口。在上述代码中,我们使用了 "HAL_UART_Receive" 函数来接收串口数据,并使用 printf 来在终端上显示收到的数据。如果有任何问题,请随时向我提问。

2401_85258012的博客 1073

Android开发——Bitmap图像效果

介绍Bitmap图像处理基本原理,整理了几种具体实现案例。

m0_65859678的博客 2507

前端使用二开Thingsboard一、二、三事(四)-部件库

以项目实战为基础,逐步介绍前端在thingsboard系统二次开发中的一些注意事项以及一些thingsboard一些页面功能讲解,为前端人员开发使用thingsboard提供一种可靠思路,打造一个完美的物联网系统。

weixin_43163457的博客 739

Android本地图片或者网络图片高斯模糊效果(毛玻璃效果)图片模糊效果一行代码搞定

http://blog.youkuaiyun.com/qiushi_1990/article/details/50886183 本地图片或者网络图片高斯模糊效果(毛玻璃效果) 首先看效果图 1,本地图片高斯模糊 2,网络图片高斯模糊 github网址:https://github.com/qiushi123/BlurImageQcl

a123473915的专栏 3207

【Claude Code的Harness Engineering实现】:06-记忆系统(Memory)

记忆系统是Claude Code实现跨会话持久化和上下文保持的核心组件。它分为短期记忆(当前会话的对话历史)和长期记忆(跨会话保留的结构化信息),通过多层级的文件系统实现灵活的记忆管理。

rengang66的博客 240

【Word提效 No.010】使用AI一键复制格式刷应用格式

本文介绍利用AI工具WorkBuddy实现Word文档格式批量复制的自动化解决方案。通过简单指令即可将指定段落的格式一键应用到多个目标段落,解决传统格式刷操作繁琐、易出错的问题。方案包含三步操作:准备文档、输入指令模板、验收效果,并提供多种场景的现成指令示例。该工具支持字体、段落等格式属性的批量复制,且不会覆盖原文件,适用于论文、手册等文档的格式统一需求。

u011186532的专栏 77

Android Bitmap类的常用方法

Bitmap类

u010919530的专栏 1100

【系统架构设计师】预测试卷十:综合知识(75道选择题)

本文包含75道选择题,覆盖计算机系统、操作系统、网络、数据库、软件工程等核心知识域,其中系统架构设计与评估占比最高(19题)。题目难度稍高,注重灵活应用,题干全新且不与前8套重复。部分典型题目解析包括:计算机性能比较(CPU时间公式TLB/页表机制)、Cache写策略、流水线分支惩罚、管程条件变量、LRU近似算法、自旋锁适用场景、TCP字节流特性、Anycast应用、MVCC机制、分布式事务选型等。答案详解强调易错点,如性能比较需综合计算、TLB缺失不等于缺页、

数据知道的博客 477

Android Bitmap 类

BitMap类: public void recycle()——回收位图占用的内存空间,把位图标记为Dead public final boolean isRecycled() ——判断位图内存是否已释放 public final int getWidth()——获取位图的宽度 public final int getHeight()——获取位图的高度 public

探索。。。发现。。。 1058

Probability and Statistics - 4th edition

Probability and Statistics - 4th edition

C# WinForm 基于DirectShow.dll编写的程序,可边预览边保存视频,音频和图片

基于微软的DirectShow.dll的二次开发1.自动识别连接的摄像头跟麦克风且可以对其进行选择(默认选中第一个)2.可录制wmv和avi两种格式的视频并且都带有音频,avi可以录制的分辨率和帧数进行选择,wmv默认进行了淸晰度优化如不喜欢可去除代码中有相关提示3.可在预览点开之后进行拍照,也可边录制视频边拍照4.添加了视频和音频的压缩功能(酌情使用)这次二次开发发现C#对DirectShow的相关信息太少,这次做完也不敢藏私共享出来,还望大家指正

【Android开发】图形图像处理技术-Bitmap和BitmapFactory类

一、Bitmap类 Bitmap类代表位图,是Android系统中图像处理的一个重要类。使用该类,不仅可以获取图像文件信息,进行图像剪切、旋转、缩放等操作,而且还可以指定格式保存图像文件。对于这些操作,都可以通过Bitmap类提供的方法来实现。Bitmap类提供的常用方法如表所示:(1)public final int getHeight():获取位图...

weixin_34232744的博客 404

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

android之Bitmap

Bitmap是重要的图像,在android以及其他的语言平台上都是很重要的。所以我们要好好的研究Bitmap。 常用的公共方法: boolean compress(Bitmap.CompressFormat format, int quality, OutputStream stream) 把位图的压缩信息写入到一个指定的输出流中。如果返回true,可以通过传递一个相应的输出流到

android大牛MrJing 活动中心 3957

IEM模型,地表粗糙度模拟

利用微波反演土壤水分时候,利用IEM模型可以实现对随机地表的模拟

Bitmap的使用

Bitmap的使用1 Bitmap1.1 Bitmap.Config1.2 Bitmap.CompressFormat1.3 常用方法2 BitmapFactory2.1 Bitmap 创建2.2 Option 类3 Bitmap的压缩加载 1 Bitmap Bitmap中有两个枚举 1.1 Bitmap.Config Config 单位像素所占字节数 解析 ALPHA_8 1 颜色信息只由透明度组成,占 8 位 RGB_565 2 颜色信息由 rgb 三部分组成, R 占

qq_37149418的博客 555

android.grapthics.Bitmap类的详解

public final class Bitmap extends Object implements Parcelable java.lang.Object    ↳ android.graphics.Bitmap Public Methods boolean compress(Bitmap

李棚的优快云专栏 1539

android Bitmap学习总结

BitMap类:  public void recycle()——回收位图占用的内存空间,把位图标记为Dead  public final boolean isRecycled() ——判断位图内存是否已释放  public final int getWidth()——获取位图的宽度  public final int getHeight()——获取位图的高度  public final

yujunlong3919的专栏 497

Bitmap

Bitmap 译者署名:StreamH 译者链接:http://blog.youkuaiyun.com/qs_csu 版本:Android 4.0 r1 结构 继承关系 public class Bitmap extends Object implements Parcelable          java.lang.Object android.graphics.Bi

w1041966246的专栏 718

Android中图片Bitmap的缩放

在Android开发中,经常会遇到Android图片的缩放问题,比如

stop_pig的专栏 4万+

【Android中文API】Bitmap

2019独角兽企业重金招聘Python工程师标准>>> ...

weixin_34357962的博客 127

Android 4K高清图片解码显示(2)BitmapFactory常用Bitmap的解码方法

Bitmap表示位图,它将图像定义为由点(像素)组成,每个点可以由多种色彩表示,包括2、4、8、16、24和32位色彩。例如,一幅1024×768分辨率的32位真彩图片,其所占存储字节数为:1024×768×32/8=3072KB,如果是4K的图片,解码时占用内存的大小可想而知。在android系统当中,bitmap是图像处理最重要的类之一。用它可以获取图像文件信息,进行图像剪切、旋转、缩放等操作

ccqqqqqq的专栏 2661
上一篇: Android裁剪bitmap文件为正方形
下一篇: Android 带你彻底理解 Window 和 WindowManager
hypercube2
博客等级 码龄18年 23粉丝 169原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值