PHP中的实现AbstractFactory模式

配置权重_高盛都在用的资产配置模型,BL贝叶斯框架改进Markowitz 前面我们说到,markoviz的均值-方差模型,第一次,用数学的方式严格证明了投资组合存在最优的权重,但它的学术意义大于实战。主要原因有两个:1,人们很难有效的预测期望收益率;2,最优资产组合配置对输入非常敏感,结果往往难以被人理解。还有就是在投资中,定量只是完成初步构建,同步的定性判断依然非常重要:第一,投资者的认知偏好:倾向于关注他们认为被低估,但有发展潜力或者可以确定相对交易价值的小部分股票... 阅读详情

 

<?php
/**
 * 数据库连接抽象工厂
 * filename: IAbstractFactory.php
 
*/
interface IAbstractFactory{
    
function getMysqlConnection();
    
function getOracleConnection();
}
?>

 

<?php
/**
 * filename: ConnectionFactory.php
 
*/
require_once 'IAbstractFactory.php';
require_once 'MysqlConnection.php';
require_once 'OracleConnection.php';
/**
 * 数据库连接工厂
 
*/
class ConnectionFactory implements IAbstractFactory {
    
/**
     * uri scheme 一个uri的模式部分,例如 JDBC数据库连接 jdbc:mysql://localhost:3306/test
     * 这里的scheme部分为jdbc,还有其他的比如 http,ftp,https 等等 
     * @access private
     
*/
    
protected $scheme = null;
    
public function getMysqlConnection() {
        
return new MysqlConnection();
    }
    
public function getOracleConnection() {
        
return new OracleConnection();
    }
}
?>

 

<?php
/**
 * 数据库连接接口
 * filename: IConnection.php
 
*/
interface IConnection {
}
?>

数据库链接实现

<?php
/**
 * filename: MysqlConnection.php
 
*/
require_once 'IConnection.php';
class MysqlConnection implements IConnection {
    
function __construct() {
    }
}
?>

 

<?php
/**
 * filename: OracleConnection.php
 
*/
require_once 'IConnection.php';
class OracleConnection implements IConnection {
    
function __construct() {
    }
}
?>

UnitTestCase

<?php
require_once 'simpletest/unit_tester.php';
require_once 'simpletest/reporter.php';
require_once 'ConnectionFactory.php';
require_once 'MysqlConnection.php';
/**
 * Database Factory Test Case 
 * 
 
*/
class FactoryTestCase extends UnitTestCase {
    
function testFactoryAndConnection() {
        
// factory test
        $factory = new ConnectionFactory();
        
$this->assertNotNull($factory);
        
$this->assertIsA($factory, 'ConnectionFactory');
        
// mysql connection test
        $connection = $factory->getMysqlConnection();
        
$this->assertNotNull($connection);
        
$this->assertIsA($connection, 'MysqlConnection');
        
// oracle connection test
        $connection = $factory->getOracleConnection();
        
$this->assertNotNull($connection);
        
$this->assertIsA($connection, 'OracleConnection');
    }
}
// start test
$test = new FactoryTestCase();
$test->run(new HtmlReporter());
?>
平衡电桥在高压绝缘检测中的动态切换策略与误差优化 本文深入探讨了平衡电桥在高压绝缘检测中的动态切换策略与误差优化方法。通过分析四种基本切换模式及智能切换时序设计,显著提升检测精度与范围。结合电阻选型黄金法则和软件补偿技术,有效降低测量误差,为电动汽车电池管理系统提供可靠的安全保障。 阅读详情

相关推荐

生成式引擎优化(GEO):启动GEO优化的5个有效策略

随着生成式AI的普及,传统SEO正被GEO(生成式引擎优化)取代。本文提出GEO五大核心策略:用户意图解析、结构化内容设计、语义关键词优化、对话式内容创作和权威信源建设。研究表明,优化后的内容在AI答案中的引用率提升300%,点击率增长27%。文章还介绍了BERT模型、Schema标记等关键技术工具,并指出未来GEO将向多模态优化、实时数据更新方向发展。企业需避免简单堆砌关键词,应建立长期内容策略,通过结构化、权威性内容在AI时代保持竞争优势。

解锁AI流量新红利!🚀 GEO优化(生成引擎优化)助您掌控AI搜索,让AI成为您的品牌最佳代言人! 2785

PHP设计模式(三)抽象工厂模式(Abstract Factory For PHP)

一、什么是抽象工厂模式   抽象工厂模式的用意为:给客户端提供一个接口,可以创建多个产品族中的产品对象 ,而且使用抽象工厂模式还要满足以下条件: 系统中有多个产品族,而系统一次只可能消费其中一族产品。 同属于同一个产品族的产品可以使用。   产品族:位于不同产品等级结构中,功能相关联的产品组成的家族。下面例子的 汽车和空调就是两个产品树, 奔驰C200+格力某型号空调...

228

RocketMq面板访问异常 com.alibaba.fastjson.JSONException: not close json text, token : string

rocketmq JSONException: not close json text, token : string 问题解决

qq_21067307的博客 5573

PHP设计模式之抽象工厂模式(Abstract Factory)代码实例大全(一)

目的 在不指定具体类的情况下创建一系列相关或依赖对象。 通常创建的类都实现相同的接口。 抽象工厂的客户并不关心这些对象是如何创建的,它只是知道它们是如何一起运行的。 UML 图 ★官方PHP高级学习交流社群「点击」管理整理了一些资料,BAT等一线大厂进阶知识体系备好(相关学习资料以及笔面试题)以及不限于:分布式架构、高可扩展、高性能、高并发、服务器性能调优、TP6,laravel,YII2,Redis,Swoole、Swoft、Kafka、Mysql优化、shell脚本、Docker、微服务、Nginx

weixin_43814458的博客 284

CentOS7下快速修复libssl.so.1.1缺失问题(附腾讯云镜像加速下载)

本文详细介绍了在CentOS7系统中快速修复libssl.so.1.1缺失问题的工程化实践方案。通过编译安装OpenSSL 1.1.x版本、配置动态链接器及创建符号链接等步骤,有效解决共享对象文件缺失问题,并提供了腾讯云镜像加速下载的优化方案,帮助开发者高效部署现代应用。

weixin_33711647的博客 367

WorkVisual传输程序报错_发现一个内部错误

WorkVisual传输程序报错_发现一个内部错误

qq_16401025的博客 2452

php 抽象工厂模式,PHP设计模式(三)抽象工厂模式(Abstract Factory)

一、什么是抽象工厂模式抽象工厂模式的用意为:给客户端提供一个接口,可以创建多个产品族中的产品对象 ,而且使用抽象工厂模式还要满足以下条件:系统中有多个产品族,而系统一次只可能消费其中一族产品。同属于同一个产品族的产品可以使用。产品族:位于不同产品等级结构中,功能相关联的产品组成的家族。下面例子的 汽车和空调就是两个产品树, 奔驰C200+格力某型号空调就是一个产品族, 同理, 奥迪A4+海尔某型号...

weixin_35804997的博客 186

Android AMS——AMS初始化(二)

Android AMS 也是一个系统服务,属于系统服务中的引导服务,在 startBootstrapServices() 方法中启动。这里我们就来看一下 ActivityManagerService 的启动流程。

小旭的专栏 775

PHP 设计模式系列之抽象工厂模式(Abstract Factory)

抽象工厂模式为一组相关或相互依赖的对象创建提供接口,而无需指定其具体实现类。抽象工厂的客户端不关心如何创建这些对象,只关心如何将它们组合到一起。举个例子,如果某个应用是可移植的,那么它需要封装平台依赖,这些平台可能包括窗口系统、操作系统、数据库等等。这种封装如果未经设计,通常代码会包含多个 if 条件语句以及对应平台的操作。这种硬编码不仅可读性差,而且扩展性也不好。提供一个间接的层(即“抽象工厂”)抽象一组相关或依赖对象的创建而不是直接指定具体实现类。该“工厂”对象的职责是为不同平台提供创建服务。客户端不需

vd15528175269的博客 633

【Bug已解决】codex: debug 模式无输出 — CodeX CLI 调试模式不工作解决方案

CodeX CLI 开启 debug 模式后无输出/日志不打印的解决方案,含 debug 开关、日志级别、stderr 重定向与 IDE 日志面板。

一键难忘的博客 4164

PTC Creo软件二次开发:使用C++进行Creo二次开发实战

C++是一种静态类型的、编译式的、通用的、大小写敏感的、不规则的编程语言,支持过程化编程、面向对象编程和泛型编程。由Bjarne Stroustrup在贝尔实验室开发,最初作为C语言的增强版出现,后来发展成为一种独立的语言。C++不仅保留了C语言的高效性和灵活性,还引入了类、模板、命名空间等高级特性,使其成为开发复杂系统和软件的理想选择。

kkchenjj的博客 4038

php对象池使用情况,PHP设计模式范例 — DesignPatternsPHP(1)创建型设计模式

【搬运于GitHub开源项目DesignPatternsPHP】项目地址:戳我1、创建型设计模式在软件工程中,创建型设计模式承担着对象创建的职责,尝试创建适合程序上下文的对象,对象创建设计模式的产生是由于软件工程设计的问题,具体说是向设计中增加复杂度,创建型设计模式解决了程序设计中对象创建的问题。1.1 抽象工厂1.1.1 目的创建一系列相关或依赖的对象,而不指定它们的具体类。通常创建的类都实现相...

weixin_39961943的博客 127

AI Agent智能体在Android开发中的应用

本文探讨了AIAgent(智能代理体)在Android开发中的应用,涵盖技术原理、实践案例与未来趋势。AIAgent通过机器学习、自然语言处理等技术实现代码生成、测试自动化及性能优化,显著提升开发效率。例如,强化学习模型可优化APP响应时间(公式:$\text{响应时间}=f(\text{负载},\text{资源})$),自动化测试覆盖率提升至95%。

郑伟强dev的专栏 123

《OpenGLES 2.0 Programming Guide》学习笔记(持续更新)

《OpenGLES 2.0 Programming Guide》 学习笔记 1 介绍OpenGLES gles由KhronosGroup创立,目前有3个版本1.0,1.1(统称1.x)和2.0。ES1.0,1.1由OpenGL1.3,1.5继承而来,ES2.0由OpenGL2.0继承而来。 OpenGLES 2.0的specifications有两份:theOpenGL ES

聚焦游戏和图形引擎开发技术 3万+

IDEA的使用指南

IDEA基于java的使用手册,可以最快速的上手,在使用中不断的丰富自己的使用技巧.

NTscan扫描工具

ntscan是一个扫描器,可以扫描没有密码和弱密码的共享,先到配置文件中填写猜测的用户名和密码,扫描过程中右侧出现的是扫描日志。

在win7下搭建OpenGL ES 2.0的开发环境

一、所用到的工具和软件: 1.AMD的OpenGL ES 2.0的模拟器:模拟器 2.Visual Studio 2015 3.《OpenGL ES2.0 Programming guide》里的例子源码:源码 二、安装步骤: 1.安装VS,我使用的版本是VS2015; 1.AMD的模拟器:安装步骤相对简单在这里就不细说了,关键在于将其类库导入到VS中以方便程序对类库的引用和编

linshuhe1的专栏 5164

计算机控制技术及应用

《计算机控制技术及应用》通过总结作者的科研成果和吸收国内外的先进理论、方法和技术,以计算机控制系统的网络化、开放化、智能化和集成化发展趋势为主线索,主要介绍计算机控制系统的基本概念和计算机控制系统的典型形式,计算机控制系统的数学描述与基本分析方法,以及数字PID控制器、最少拍控制系统、达林算法、状态变量设计法等设计方法及其各种改进算法。重点突出计算机控制系统输入输出通道接口的设计方法和典型控制系统的设计案例与实现方法等。

OpenGL ES2.0 学习之旅(Pre 1)

2012年的中旬接触过OpenGL ES2.0, 现在3.0都出了。重新下载OpenGL ES2.0 Programming Guide,但开发了一年多了,觉得学东西,不能再像以前一样走马观花+拿来主义了。要系统地学习,沉入进去,首先第一步就是踏实基础,OpenGL ES2.0的基础在哪里? 3D图形学!以前在学校实验室用过,有些基础,回过头再对3D图形学进行好好地梳理一遍。

winddarklj的专栏 561

深度学习工具包 DeepLearningToolbox

深度学习工具包Deprecation notice.-----This toolbox is outdated and no longer maintained.There are much better tools available for deep learning than this toolbox, e.g. [Theano](http://deeplearning.net/software/theano/), [torch](http://torch.ch/) or [tensorflow](http://www.tensorflow.org/)I would suggest you use one of the tools mentioned above rather than use this toolbox.Best, Rasmus.DeepLearnToolbox================A Matlab toolbox for Deep Learning.Deep Learning is a new subfield of machine learning that focuses on learning deep hierarchical models of data.It is inspired by the human brain's apparent deep (layered, hierarchical) architecture.A good overview of the theory of Deep Learning theory is[Learning Deep Architectures for AI](http://www.iro.umontreal.ca/~bengioy/papers/ftml_book.pdf)For a more informal introduction, see the following videos by Geoffrey Hinton and Andrew Ng.* [The Next Generation of Neural Networks](http://www.youtube.com/watch?v=AyzOUbkUf3M) (Hinton, 2007)* [Recent Developments in Deep Learning](http://www.youtube.com/watch?v=VdIURAu1-aU) (Hinton, 2010)* [Unsupervised Feature Learning and Deep Learning](http://www.youtube.com/watch?v=ZmNOAtZIgIk) (Ng, 2011)If you use this toolbox in your research please cite [Prediction as a candidate for learning deep hierarchical models of data](http://www2.imm.dtu.dk/pubdb/views/publication_details.php?id=6284)```@MASTERSTHESIS\{IMM2012-06284, author = "R. B. Palm", title = "Prediction as a candidate for learning deep hierarchical models of data", year = "2012",}```Contact: rasmusbergpalm at gmail dot comDirectories included in the toolbox-----------------------------------`NN/` - A library for Feedforward Backpropagation Neural Networks`CNN/` - A library for Convolutional Neural Networks`DBN/` - A library for Deep Belief Networks`SAE/` - A library for Stacked Auto-Encoders`CAE/` - A library for Convolutional Auto-Encoders`util/` - Utility functions used by the libraries`data/` - Data used by the examples`tests/` - unit tests to verify toolbox is workingFor references on each library check REFS.mdSetup-----1. Download.2. addpath(genpath('DeepLearnToolbox'));Example: Deep Belief Network---------------------```matlabfunction test_example_DBNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit RBM and visualize its weightsrand('state',0)dbn.sizes = [100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);figure; visualize(dbn.rbm{1}.W'); % Visualize the RBM weights%% ex2 train a 100-100 hidden unit DBN and use its weights to initialize a NNrand('state',0)%train dbndbn.sizes = [100 100];opts.numepochs = 1;opts.batchsize = 100;opts.momentum = 0;opts.alpha = 1;dbn = dbnsetup(dbn, train_x, opts);dbn = dbntrain(dbn, train_x, opts);%unfold dbn to nnnn = dbnunfoldtonn(dbn, 10);nn.activation_function = 'sigm';%train nnopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.10, 'Too big error');```Example: Stacked Auto-Encoders---------------------```matlabfunction test_example_SAEload mnist_uint8;train_x = double(train_x)/255;test_x = double(test_x)/255;train_y = double(train_y);test_y = double(test_y);%% ex1 train a 100 hidden unit SDAE and use it to initialize a FFNN% Setup and train a stacked denoising autoencoder (SDAE)rand('state',0)sae = saesetup([784 100]);sae.ae{1}.activation_function = 'sigm';sae.ae{1}.learningRate = 1;sae.ae{1}.inputZeroMaskedFraction = 0.5;opts.numepochs = 1;opts.batchsize = 100;sae = saetrain(sae, train_x, opts);visualize(sae.ae{1}.W{1}(:,2:end)')% Use the SDAE to initialize a FFNNnn = nnsetup([784 100 10]);nn.activation_function = 'sigm';nn.learningRate = 1;nn.W{1} = sae.ae{1}.W{1};% Train the FFNNopts.numepochs = 1;opts.batchsize = 100;nn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.16, 'Too big error');```Example: Convolutional Neural Nets---------------------```matlabfunction test_example_CNNload mnist_uint8;train_x = double(reshape(train_x',28,28,60000))/255;test_x = double(reshape(test_x',28,28,10000))/255;train_y = double(train_y');test_y = double(test_y');%% ex1 Train a 6c-2s-12c-2s Convolutional neural network %will run 1 epoch in about 200 second and get around 11% error. %With 100 epochs you'll get around 1.2% errorrand('state',0)cnn.layers = { struct('type', 'i') %input layer struct('type', 'c', 'outputmaps', 6, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %sub sampling layer struct('type', 'c', 'outputmaps', 12, 'kernelsize', 5) %convolution layer struct('type', 's', 'scale', 2) %subsampling layer};cnn = cnnsetup(cnn, train_x, train_y);opts.alpha = 1;opts.batchsize = 50;opts.numepochs = 1;cnn = cnntrain(cnn, train_x, train_y, opts);[er, bad] = cnntest(cnn, test_x, test_y);%plot mean squared errorfigure; plot(cnn.rL);assert(er<0.12, 'Too big error');```Example: Neural Networks---------------------```matlabfunction test_example_NNload mnist_uint8;train_x = double(train_x) / 255;test_x = double(test_x) / 255;train_y = double(train_y);test_y = double(test_y);% normalize[train_x, mu, sigma] = zscore(train_x);test_x = normalize(test_x, mu, sigma);%% ex1 vanilla neural netrand('state',0)nn = nnsetup([784 100 10]);opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samples[nn, L] = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.08, 'Too big error');%% ex2 neural net with L2 weight decayrand('state',0)nn = nnsetup([784 100 10]);nn.weightPenaltyL2 = 1e-4; % L2 weight decayopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex3 neural net with dropoutrand('state',0)nn = nnsetup([784 100 10]);nn.dropoutFraction = 0.5; % Dropout fraction opts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex4 neural net with sigmoid activation functionrand('state',0)nn = nnsetup([784 100 10]);nn.activation_function = 'sigm'; % Sigmoid activation functionnn.learningRate = 1; % Sigm require a lower learning rateopts.numepochs = 1; % Number of full sweeps through dataopts.batchsize = 100; % Take a mean gradient step over this many samplesnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex5 plotting functionalityrand('state',0)nn = nnsetup([784 20 10]);opts.numepochs = 5; % Number of full sweeps through datann.output = 'softmax'; % use softmax outputopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, train_x, train_y, opts);[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');%% ex6 neural net with sigmoid activation and plotting of validation and training error% split training data into training and validation datavx = train_x(1:10000,:);tx = train_x(10001:end,:);vy = train_y(1:10000,:);ty = train_y(10001:end,:);rand('state',0)nn = nnsetup([784 20 10]); nn.output = 'softmax'; % use softmax outputopts.numepochs = 5; % Number of full sweeps through dataopts.batchsize = 1000; % Take a mean gradient step over this many samplesopts.plot = 1; % enable plottingnn = nntrain(nn, tx, ty, opts, vx, vy); % nntrain takes validation set as last two arguments (optionally)[er, bad] = nntest(nn, test_x, test_y);assert(er < 0.1, 'Too big error');```[![Bitdeli Badge](https://d2weczhvl823v0.cloudfront.net/rasmusbergpalm/deeplearntoolbox/trend.png)](https://bitdeli.com/free "Bitdeli Badge")

OpenGL ES Programming Guide for iOS 之 iOS 中的OpenGL ES

iOS 中的OpenGL ES   OpenGL ES的规范定义了使用GPU硬件渲染图形的平台无关的API。平台 实现OpenGLES时提供了一个渲染上下文,用于执行OpenGLES命令,帧缓存用来保持渲染结果,而呈现出的帧缓冲用于对其中的内容进行一个或多个渲染目的地 显示。在iOS上,EAGLContext类实现一个渲染上下文。iOS只提供一种帧缓冲,OpenGLES帧缓冲区对象,GLK

影子的专栏 972

OpenGL ES 3.0编程指南:从零开始掌握移动端3D图形渲染的终极教程

想要在移动设备上创建令人惊艳的3D图形效果吗?OpenGL ES 3.0正是你需要的核心技术!作为移动设备上高性能图形渲染的标准API,OpenGL ES 3.0为Android和iOS开发者提供了强大的图形处理能力。本教程将带你从零开始,通过opengles3-book项目这个宝贵的学习资源,逐步掌握移动端3D图形渲染的核心技能。无论你是刚接触图形编程的新手,还是希望提升技能的开发者,这篇指南都

gitblog_00226的博客 366

设计模式之AbstractFactory模式

前文降到Factory模式,只能解决同一类的对象创建的问题,现在有如下问题: 假如我们需要开发一块游戏,设置不同的关卡,在不同的关卡需要有不同等级的boss。作为开发者我们就需要设计boss的类,然后初级boss,中级boss,高级boss,BT boss都由该类来派生。在每个关卡我们都需要创建类的实例,可以想象该游戏中我们将会创建成千上万的不同实例,还要保证创建的实例不会出错。 Abstra

yingmuliuchuan的博客 814

php 抽象工厂类实例,抽象工厂模式(Abstract Factory)

抽象工厂模式(Abstract Factory)由 学院君 创建于5年前, 最后更新于 1个月前版本号 #334456 views31 likes1 collects1、模式概述抽象工厂模式为一组相关或相互依赖的对象创建提供接口,而无需指定其具体实现类。抽象工厂的客户端不关心如何创建这些对象,只关心如何将它们组合到一起。2、问题引出举个例子,如果某个应用是可移植的,那么它需要封装平台依赖,这些平台...

weixin_42355744的博客 234

php 抽象工厂模式,抽象工厂模式(Abstract Factory)

1.1.1. 目的在不指定具体类的情况下创建一系列相关或依赖对象。 通常创建的类都实现相同的接口。 抽象工厂的客户并不关心这些对象是如何创建的,它只是知道它们是如何一起运行的。1.1.2. UML 图1.1.3. 代码你可以在GitHub 上找到这个代码。Product.phpnamespace DesignPatterns\Creational\AbstractFactory;interfac...

weixin_36451983的博客 139

php 抽象工厂类实例,Abstract Factory in PHP 抽象工厂模式在PHP中的应用举例

In the Abstract Factory Pattern, an abstract factory defines what objects the non-abstract or concrete factory will need to be able to create.The concrete factory must create the correct objects for i...

weixin_39645249的博客 140

PHP 代码覆盖率分析

PHP代码覆盖率分析平台: Windows 2003 Server x64 内存: 2G软件需求: 1. PHP 5.0 或以上版本 2. Xdebug Zend扩展扩展 http://www.xdebug.org 3. PEAR XML_Parser 模块1.25 或则以上版本 4. Spike PHPCoverage 0.8 http://developer.spikesource.c

httpnet的专栏 9106

str_replace(),使用数组一次调用替换多个字符串

 /* 使用数组一次调用替换多个字符串 */function html($var) {    echo  . $var . ;}$a = "post_processed_string"; $b = array("post_", "_");$c = array("", " ");$d = str_replace($b,$c,$a);/* 等效的一次调用替换一个字符串的方法 */for

httpnet的专栏 8458

PHP5模块和CGI

    把PHP5作为CGI安装是一个快速运行PHP5的方法,并且不必修改PHP4的配置。    另外一个不必修改PHP4的配置用同时获得完全的PHP5功能的方法是把PHP5设置在apache的另外一个端口上监听来自客户端的请求。比如apache的8080端口。这样就可以在80端口上处理PHP4脚本,在8080端口上处理PHP5的面向对象的脚本,一举两得。    记住CGI安装方式与模块安装方式相

httpnet的专栏 4299
上一篇: PHP中的实现Registry模式过程中的领悟
下一篇: 使用sampletest进行web测试
httpnet
博客等级 码龄23年 7粉丝 72原创
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付:10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值