show ip protocols

最新推荐文章于 2021-08-17 10:57:42 发布

原创最新推荐文章于 2021-08-17 10:57:42 发布 · 3.5k 阅读

2 ·

CC 4.0 BY-SA版权

文章标签：

#网络

网络专栏收录该内容

113 篇文章

订阅专栏

本博文展示了如何使用命令行指令查看路由器的IP路由协议配置和统计数据，包括路由协议类型、更新周期、路由信息来源、网络路由等关键信息。

部署运行你感兴趣的模型镜像

show ip protocols

//该命令查看ip路由协议配置和统计信息

R2#show ip protocols 
Routing Protocol is "rip"
Sending updates every 30 seconds, next due in 10 seconds
Invalid after 180 seconds, hold down 180, flushed after 240
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Redistributing: rip
Default version control: send version 1, receive 1
  Interface             Send  Recv  Triggered RIP  Key-chain
  Serial1/1             1     1     
  Serial1/2             1     1     
  Serial1/0             1     1     
Automatic network summarization is in effect
Maximum path: 4
Routing for Networks:
	172.16.0.0
	172.31.0.0
Passive Interface(s):
Routing Information Sources:
	Gateway         Distance      Last Update
	172.16.23.3          120      00:00:20
	172.16.24.4          120      00:00:10
	172.31.12.1          120      00:00:14
Distance: (default is 120)

您可能感兴趣的与本文相关的镜像