communicating-with-serial-port-in-C-Sharp

转载：http://www.c-sharpcorner.com/uploadfile/eclipsed4utoo/communicating-with-serial-port-in-C-Sharp/

This article will demonstrate how to write and receive data from a device connected to a serial port in C# and .NET. We will be writing the received data to a TextBox on a form, so this will also deal with threading.

In the past, to communicate with a Serial Port using .Net 1.1, you had to either use the Windows API, or use a third-party control. With .Net 2.0, Microsoft added this support with the inclusion of the SerialPort class as part of the System.IO.Ports namespace. Implementation of the SerialPort class is very straight-forward. To create an instance of the SerialPort class, you simply pass the SerialPort options to the constructor of the class:

// all of the options for a serial device

    // ---- can be sent through the constructor of the SerialPort class

    // ---- PortName = "COM1", Baud Rate = 19200, Parity = None,

    // ---- Data Bits = 8, Stop Bits = One, Handshake = None

    SerialPort _serialPort = new SerialPort("COM1", 19200, Parity.None, 8, StopBits.One);

    _serialPort.Handshake = Handshake.None;

 

To receive data, we will need to create an EventHandler for the "SerialDataReceivedEventHandler":

// "sp_DataReceived" is a custom method that I have created

    _serialPort.DataReceived += newSerialDataReceivedEventHandler(sp_DataReceived);

You can also set other options, such as the ReadTimeout and WriteTimeout:

// milliseconds _serialPort.ReadTimeout = 500;

_serialPort.WriteTimeout = 500;

Once you are ready to use the Serial Port, you will need to open it: 

// Opens serial port 
_serialPort.Open(); 

Now we are ready to receive data. However, to write this data to the TextBox on a form, we need to create a delegate. .Net does not allow cross-thread action, so we need to use a delegate. The delegate is used to write to the UI thread from a non-UI thread.

// delegate is used to write to a UI control from a non-UI thread

private delegate void SetTextDeleg(string text);

We will now create the "sp_DataReceived" method that will be executed when data is received through the serial port:

void sp_DataReceived(object sender, SerialDataReceivedEventArgs e)

{

    Thread.Sleep(500);

    string data = _serialPort.ReadLine();

    // Invokes the delegate on the UI thread, and sends the data that was received to the invoked method.

    // ---- The "si_DataReceived" method will be executed on the UI thread which allows populating of the textbox.

    this.BeginInvoke(new SetTextDeleg(si_DataReceived), new object[] { data });

}

Now we create our "si_DataReceived" method:

private void si_DataReceived(string data) { textBox1.Text = data.Trim(); }

We can now receive data from a serial port device and display it on a form. Some devices will send data without being prompted. However, some devices need to be send certain commands, and it will reply with the data that the command calls for. For these devices, you will write data to the serial port, and use the previous code to get the data that will be sent back. In my example, I will be communicating with a scale. For this particular scale, sending the command "SI\r\n" will force it to return the weight of whatever is on the scale. This command is specific for this scale. You will need to read the documentation of your serial device to find commands that it will receive. To write to the serial port, I have created a "Start" button on the form. I have added code to it's Click_Event:

private void btnStart_Click(object sender, EventArgs e)

{

    // Makes sure serial port is open before trying to write

    try

    {

        if(!(_serialPort.IsOpen))

        _serialPort.Open();

        _serialPort.Write("SI\r\n");

    }

    catch (Exception ex)

    {

        MessageBox.Show("Error opening/writing to serial port :: " + ex.Message,"Error!");

    }

}

And that is all you need to do. I have attached the Visual Studio 2005 solution.

Article Extensions

Contents added by  Arjun Walmiki on  Dec 04, 2012

this is my code but not receive data from com port:

using System;

using System.Collections.Generic;

using System.Linq;

using System.Text;

using System.IO.Ports;

using System.Threading;

using System.IO;

namespace PortChat

{

    public class PortChat

    {

       // private static StreamWriter sw = new StreamWriter("filename.txt");

        static bool _continue;

        static SerialPort _serialPort;

        

        public static void Main(string[] args)

        {

            string name;

            string message;

            //string path = "";

            //// Write

            //string path = "example.txt";

            //string[] myMenu = { "A", "B", "C" };

            //File.WriteAllLines(path, myMenu);

            //// Read

            //string[] readMenu = File.ReadAllLines(path);

            StringComparer stringComparer = StringComparer.OrdinalIgnoreCase;

            Thread readThread = new Thread(Read);

            

            // Create a new SerialPort object with default settings.

            _serialPort = new SerialPort();

            // Allow the user to set the appropriate properties.

            _serialPort.PortName = SetPortName(_serialPort.PortName);

            _serialPort.BaudRate = SetPortBaudRate(_serialPort.BaudRate);

            _serialPort.Parity = SetPortParity(_serialPort.Parity);

            _serialPort.DataBits = SetPortDataBits(_serialPort.DataBits);

            _serialPort.StopBits = SetPortStopBits(_serialPort.StopBits);

            _serialPort.Handshake = SetPortHandshake(_serialPort.Handshake);

            // Set the read/write timeouts

            _serialPort.ReadTimeout = 500;

            _serialPort.WriteTimeout = 500;

            _serialPort.Open();

            _continue = true;

            readThread.Start();

            _serialPort.DataReceived += new SerialDataReceivedEventHandler(_serialPort_DataReceived);

           

            

            //_serialPort.WriteLine("$");//Command to start Data Stream

            //// Wait for data or user input to continue.

            //Console.ReadLine();

           // Console.WriteLine("FILEPATH");

           // path = Console.ReadLine();

            Console.Write("Name: ");

            name = Console.ReadLine();

            Console.WriteLine("Type QUIT to exit");

            while (_continue)

            {

                message = Console.ReadLine();

                if (stringComparer.Equals("quit", message))

                {

                    _continue = false;

                }

                else

                {

                    _serialPort.WriteLine(String.Format("<{0}>: {1}", name, message));

                }

            }

            readThread.Join();

            _serialPort.Close();

        }

        static void _serialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)

        {

            SerialPort _serialPort = (SerialPort)sender;

            Console.WriteLine(_serialPort.ReadExisting());

        }

        public static void Read()

        {

            while (_continue)

            {

                try

                {

        

                    string message = _serialPort.ReadLine();

                    Console.WriteLine(message);

                }

                catch (TimeoutException) { }

            }

        }

        public static string SetPortName(string defaultPortName)

        {

            string portName="";

            Console.WriteLine("Available Ports:");

            foreach (string s in SerialPort.GetPortNames())

            {

                Console.WriteLine("   {0}", s);

                portName = s;

            }

            //my code

            _serialPort.PortName = portName;

            defaultPortName = portName;

            Console.Write("COM port({0}): ", defaultPortName);

            portName = Console.ReadLine();

            if (portName == "")

            {

                portName = defaultPortName;

            }

            return portName;

        }

        public static int SetPortBaudRate(int defaultPortBaudRate)

        {

            string baudRate;

            Console.Write("Baud Rate({0}): ", defaultPortBaudRate);

            baudRate = Console.ReadLine();

            if (baudRate == "")

            {

                baudRate = defaultPortBaudRate.ToString();

            }

            return int.Parse(baudRate);

        }

        public static Parity SetPortParity(Parity defaultPortParity)

        {

            string parity;

            Console.WriteLine("Available Parity options:");

            foreach (string s in Enum.GetNames(typeof(Parity)))

            {

                Console.WriteLine("   {0}", s);

            }

            Console.Write("Parity({0}):", defaultPortParity.ToString());

            parity = Console.ReadLine();

            if (parity == "")

            {

                parity = defaultPortParity.ToString();

            }

            return (Parity)Enum.Parse(typeof(Parity), parity);

        }

        

        public static int SetPortDataBits(int defaultPortDataBits)

        {

            string dataBits;

            Console.Write("Data Bits({0}): ", defaultPortDataBits);

            dataBits = Console.ReadLine();

            if (dataBits == "")

            {

                dataBits = defaultPortDataBits.ToString();

            }

                return int.Parse(dataBits);

        }

        public static StopBits SetPortStopBits(StopBits defaultPortStopBits)

        {

            string stopBits;

            Console.WriteLine("Available Stop Bits options:");

            foreach (string s in Enum.GetNames(typeof(StopBits)))

            {

                Console.WriteLine("   {0}", s);

            }

            Console.Write("Stop Bits({0}):", defaultPortStopBits.ToString());

            stopBits = Console.ReadLine();

            if (stopBits == "")

            {

                stopBits = defaultPortStopBits.ToString();

            }

            return (StopBits)Enum.Parse(typeof(StopBits), stopBits);

        }

        public static Handshake SetPortHandshake(Handshake defaultPortHandshake)

        {

            string handshake;

            Console.WriteLine("Available Handshake options:");

            foreach (string s in Enum.GetNames(typeof(Handshake)))

            {

                Console.WriteLine("   {0}", s);

            }

            Console.Write("Handshake({0}):", defaultPortHandshake.ToString());

            handshake = Console.ReadLine();

            if (handshake == "")

            {

                handshake = defaultPortHandshake.ToString();

            }

            return (Handshake)Enum.Parse(typeof(Handshake), handshake);

        }

    }

}

Contents added by  Mahesh Chand on  Aug 03, 2010

Here is complete code sample from MSDN.

using System; using System.IO.Ports; using System.Threading; public class PortChat { static bool _continue; static SerialPort _serialPort; public static void Main() { string name; string message; StringComparer stringComparer = StringComparer.OrdinalIgnoreCase; Thread readThread = new Thread(Read); // Create a new SerialPort object with default settings. _serialPort = new SerialPort(); // Allow the user to set the appropriate properties. _serialPort.PortName = SetPortName(_serialPort.PortName); _serialPort.BaudRate = SetPortBaudRate(_serialPort.BaudRate); _serialPort.Parity = SetPortParity(_serialPort.Parity); _serialPort.DataBits = SetPortDataBits(_serialPort.DataBits); _serialPort.StopBits = SetPortStopBits(_serialPort.StopBits); _serialPort.Handshake = SetPortHandshake(_serialPort.Handshake); // Set the read/write timeouts _serialPort.ReadTimeout = 500; _serialPort.WriteTimeout = 500; _serialPort.Open(); _continue = true; readThread.Start(); Console.Write("Name: "); name = Console.ReadLine(); Console.WriteLine("Type QUIT to exit"); while (_continue) { message = Console.ReadLine(); if (stringComparer.Equals("quit", message)) { _continue = false; } else { _serialPort.WriteLine( String.Format("<{0}>: {1}", name, message) ); } } readThread.Join(); _serialPort.Close(); } public static void Read() { while (_continue) { try { string message = _serialPort.ReadLine(); Console.WriteLine(message); } catch (TimeoutException) { } } } public static string SetPortName(string defaultPortName) { string portName; Console.WriteLine("Available Ports:"); foreach (string s in SerialPort.GetPortNames()) { Console.WriteLine(" {0}", s); } Console.Write("COM port({0}): ", defaultPortName); portName = Console.ReadLine(); if (portName == "") { portName = defaultPortName; } return portName; } public static int SetPortBaudRate(int defaultPortBaudRate) { string baudRate; Console.Write("Baud Rate({0}): ", defaultPortBaudRate); baudRate = Console.ReadLine(); if (baudRate == "") { baudRate = defaultPortBaudRate.ToString(); } return int.Parse(baudRate); } public static Parity SetPortParity(Parity defaultPortParity) { string parity; Console.WriteLine("Available Parity options:"); foreach (string s in Enum.GetNames(typeof(Parity))) { Console.WriteLine(" {0}", s); } Console.Write("Parity({0}):", defaultPortParity.ToString()); parity = Console.ReadLine(); if (parity == "") { parity = defaultPortParity.ToString(); } return (Parity)Enum.Parse(typeof(Parity), parity); } public static int SetPortDataBits(int defaultPortDataBits) { string dataBits; Console.Write("Data Bits({0}): ", defaultPortDataBits); dataBits = Console.ReadLine(); if (dataBits == "") { dataBits = defaultPortDataBits.ToString(); } return int.Parse(dataBits); } public static StopBits SetPortStopBits(StopBits defaultPortStopBits) { string stopBits; Console.WriteLine("Available Stop Bits options:"); foreach (string s in Enum.GetNames(typeof(StopBits))) { Console.WriteLine(" {0}", s); } Console.Write("Stop Bits({0}):", defaultPortStopBits.ToString()); stopBits = Console.ReadLine(); if (stopBits == "") { stopBits = defaultPortStopBits.ToString(); } return (StopBits)Enum.Parse(typeof(StopBits), stopBits); } public static Handshake SetPortHandshake(Handshake defaultPortHandshake) { string handshake; Console.WriteLine("Available Handshake options:"); foreach (string s in Enum.GetNames(typeof(Handshake))) { Console.WriteLine(" {0}", s); } Console.Write("Handshake({0}):", defaultPortHandshake.ToString()); handshake = Console.ReadLine(); if (handshake == "") { handshake = defaultPortHandshake.ToString(); } return (Handshake)Enum.Parse(typeof(Handshake), handshake); } }