AFDX协议笔记

需要编写标准的AFDX协议的译码模块,查找了一些资料,搜集如下,对帧结构说明还是比较清晰的。

This document comprises the Hardware User’s Manual for the API-FDX2-V2 PCI Card, consisting of the API-FDX2-V2 electronic module. The document covers the hardware installation, the board connections, a general description of the hardware architecture and the technical data of the API-FDX2-V2. For programming information please refer to the according documents listed in the 'Applicable Documents' section. The API-FDX2-V2 module is a member of AIM's family of advanced PMC-Bus modules for analyzing, simulating, monitoring and testing of avionic databus systems. The API-FDX-2 module is used to simulate, monitor and inject protocol errors of AFDX based network systems. The API-FDX-2 offers an interface of two single or one redundant AFDX network port(s) using a half sized single card PCI bus slot of an IBM compatible PC. The on-board processing capabilities and the large memory size of the SDRAM and SSRAM enables autonomous operation with a minimal interaction of the PC host processor. A powerful PCI-Controller and Memory Arbiter is realized in a field programmable gate array. This FPGA supports both, the interface to the application and driver software tasks running on the host computer, and assists the communication for data transfer. The advanced architecture uses two processors. A powerful 64bit RISC processor (ASP) assists and supports the application and driver software tasks, and expands the capability of the API-FDX2-V2 modules to that of a high level instrument. To fulfill the real-time requirements of avionic type databus systems a high performance 32bit RISC processor (BIP) is implemented for the Bus Interface Unit (BIU). An free wheeling IRIG B Time Code Decoder is implemented on the API-FDX2-V2 boards to satisfy the requirements of 'multi-channel time tag synchronization' on system level.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

老猿讲编程

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值