Hbase shell <一>

创建表

Here is some help for this command:
Creates a table. Pass a table name, and a set of column family
specifications (at least one), and, optionally, table configuration.
Column specification can be a simple string (name), or a dictionary
(dictionaries are described below in main help output), necessarily 
including NAME attribute. 
Examples:

Create a table with namespace=ns1 and table qualifier=t1
  hbase> create 'ns1:t1', {NAME => 'f1', VERSIONS => 5}

Create a table with namespace=default and table qualifier=t1
  hbase> create 't1', {NAME => 'f1'}, {NAME => 'f2'}, {NAME => 'f3'}
  hbase> # The above in shorthand would be the following:
  hbase> create 't1', 'f1', 'f2', 'f3'
  hbase> create 't1', {NAME => 'f1', VERSIONS => 1, TTL => 2592000, BLOCKCACHE => true}
  hbase> create 't1', {NAME => 'f1', CONFIGURATION => {'hbase.hstore.blockingStoreFiles' => '10'}}
  
Table configuration options can be put at the end.
Examples:

  hbase> create 'ns1:t1', 'f1', SPLITS => ['10', '20', '30', '40']
  hbase> create 't1', 'f1', SPLITS => ['10', '20', '30', '40']
  hbase> create 't1', 'f1', SPLITS_FILE => 'splits.txt', OWNER => 'johndoe'
  hbase> create 't1', {NAME => 'f1', VERSIONS => 5}, METADATA => { 'mykey' => 'myvalue' }
  hbase> # Optionally pre-split the table into NUMREGIONS, using
  hbase> # SPLITALGO ("HexStringSplit", "UniformSplit" or classname)
  hbase> create 't1', 'f1', {NUMREGIONS => 15, SPLITALGO => 'HexStringSplit'}
  hbase> create 't1', 'f1', {NUMREGIONS => 15, SPLITALGO => 'HexStringSplit', REGION_REPLICATION => 2, CONFIGURATION => {'hbase.hregion.scan.loadColumnFamiliesOnDemand' => 'true'}}

You can also keep around a reference to the created table:

  hbase> t1 = create 't1', 'f1'

Which gives you a reference to the table named 't1', on which you can then
call methods.

PUT操作

hbase(main):001:0> put

ERROR: wrong number of arguments (0 for 4)

Here is some help for this command:
Put a cell 'value' at specified table/row/column and optionally
timestamp coordinates.  To put a cell value into table 'ns1:t1' or 't1'
at row 'r1' under column 'c1' marked with the time 'ts1', do:

  hbase> put 'ns1:t1', 'r1', 'c1', 'value'
  hbase> put 't1', 'r1', 'c1', 'value'
  hbase> put 't1', 'r1', 'c1', 'value', ts1
  hbase> put 't1', 'r1', 'c1', 'value', {ATTRIBUTES=>{'mykey'=>'myvalue'}}
  hbase> put 't1', 'r1', 'c1', 'value', ts1, {ATTRIBUTES=>{'mykey'=>'myvalue'}}
  hbase> put 't1', 'r1', 'c1', 'value', ts1, {VISIBILITY=>'PRIVATE|SECRET'}

The same commands also can be run on a table reference. Suppose you had a reference
t to table 't1', the corresponding command would be:

  hbase> t.put 'r1', 'c1', 'value', ts1, {ATTRIBUTES=>{'mykey'=>'myvalue'}}

GET操作

hbase(main):002:0> get

ERROR: wrong number of arguments (0 for 2)

Here is some help for this command:
Get row or cell contents; pass table name, row, and optionally
a dictionary of column(s), timestamp, timerange and versions. Examples:

  hbase> get 'ns1:t1', 'r1'
  hbase> get 't1', 'r1'
  hbase> get 't1', 'r1', {TIMERANGE => [ts1, ts2]}
  hbase> get 't1', 'r1', {COLUMN => 'c1'}
  hbase> get 't1', 'r1', {COLUMN => ['c1', 'c2', 'c3']}
  hbase> get 't1', 'r1', {COLUMN => 'c1', TIMESTAMP => ts1}
  hbase> get 't1', 'r1', {COLUMN => 'c1', TIMERANGE => [ts1, ts2], VERSIONS => 4}
  hbase> get 't1', 'r1', {COLUMN => 'c1', TIMESTAMP => ts1, VERSIONS => 4}
  hbase> get 't1', 'r1', {FILTER => "ValueFilter(=, 'binary:abc')"}
  hbase> get 't1', 'r1', 'c1'
  hbase> get 't1', 'r1', 'c1', 'c2'
  hbase> get 't1', 'r1', ['c1', 'c2']
  hbase> get 't1', 'r1', {COLUMN => 'c1', ATTRIBUTES => {'mykey'=>'myvalue'}}
  hbase> get 't1', 'r1', {COLUMN => 'c1', AUTHORIZATIONS => ['PRIVATE','SECRET']}
  hbase> get 't1', 'r1', {CONSISTENCY => 'TIMELINE'}
  hbase> get 't1', 'r1', {CONSISTENCY => 'TIMELINE', REGION_REPLICA_ID => 1}

Besides the default 'toStringBinary' format, 'get' also supports custom formatting by
column.  A user can define a FORMATTER by adding it to the column name in the get
specification.  The FORMATTER can be stipulated: 

 1. either as a org.apache.hadoop.hbase.util.Bytes method name (e.g, toInt, toString)
 2. or as a custom class followed by method name: e.g. 'c(MyFormatterClass).format'.

Example formatting cf:qualifier1 and cf:qualifier2 both as Integers: 
  hbase> get 't1', 'r1' {COLUMN => ['cf:qualifier1:toInt',
    'cf:qualifier2:c(org.apache.hadoop.hbase.util.Bytes).toInt'] } 

Note that you can specify a FORMATTER by column only (cf:qualifier).  You cannot specify
a FORMATTER for all columns of a column family.
    
The same commands also can be run on a reference to a table (obtained via get_table or
create_table). Suppose you had a reference t to table 't1', the corresponding commands
would be:

  hbase> t.get 'r1'
  hbase> t.get 'r1', {TIMERANGE => [ts1, ts2]}
  hbase> t.get 'r1', {COLUMN => 'c1'}
  hbase> t.get 'r1', {COLUMN => ['c1', 'c2', 'c3']}
  hbase> t.get 'r1', {COLUMN => 'c1', TIMESTAMP => ts1}
  hbase> t.get 'r1', {COLUMN => 'c1', TIMERANGE => [ts1, ts2], VERSIONS => 4}
  hbase> t.get 'r1', {COLUMN => 'c1', TIMESTAMP => ts1, VERSIONS => 4}
  hbase> t.get 'r1', {FILTER => "ValueFilter(=, 'binary:abc')"}
  hbase> t.get 'r1', 'c1'
  hbase> t.get 'r1', 'c1', 'c2'
  hbase> t.get 'r1', ['c1', 'c2']
  hbase> t.get 'r1', {CONSISTENCY => 'TIMELINE'}
  hbase> t.get 'r1', {CONSISTENCY => 'TIMELINE', REGION_REPLICA_ID => 1}

SCAN操作

hbase(main):003:0> scan

ERROR: wrong number of arguments (0 for 1)

Here is some help for this command:
Scan a table; pass table name and optionally a dictionary of scanner
specifications.  Scanner specifications may include one or more of:
TIMERANGE, FILTER, LIMIT, STARTROW, STOPROW, ROWPREFIXFILTER, TIMESTAMP,
MAXLENGTH or COLUMNS, CACHE or RAW, VERSIONS

If no columns are specified, all columns will be scanned.
To scan all members of a column family, leave the qualifier empty as in
'col_family:'.

The filter can be specified in two ways:
1. Using a filterString - more information on this is available in the
Filter Language document attached to the HBASE-4176 JIRA
2. Using the entire package name of the filter.

Some examples:

  hbase> scan 'hbase:meta'
  hbase> scan 'hbase:meta', {COLUMNS => 'info:regioninfo'}
  hbase> scan 'ns1:t1', {COLUMNS => ['c1', 'c2'], LIMIT => 10, STARTROW => 'xyz'}
  hbase> scan 't1', {COLUMNS => ['c1', 'c2'], LIMIT => 10, STARTROW => 'xyz'}
  hbase> scan 't1', {COLUMNS => 'c1', TIMERANGE => [1303668804, 1303668904]}
  hbase> scan 't1', {REVERSED => true}
  hbase> scan 't1', {ROWPREFIXFILTER => 'row2', FILTER => "
    (QualifierFilter (>=, 'binary:xyz')) AND (TimestampsFilter ( 123, 456))"}
  hbase> scan 't1', {FILTER =>
    org.apache.hadoop.hbase.filter.ColumnPaginationFilter.new(1, 0)}
  hbase> scan 't1', {CONSISTENCY => 'TIMELINE'}
For setting the Operation Attributes 
  hbase> scan 't1', { COLUMNS => ['c1', 'c2'], ATTRIBUTES => {'mykey' => 'myvalue'}}
  hbase> scan 't1', { COLUMNS => ['c1', 'c2'], AUTHORIZATIONS => ['PRIVATE','SECRET']}
For experts, there is an additional option -- CACHE_BLOCKS -- which
switches block caching for the scanner on (true) or off (false).  By
default it is enabled.  Examples:

  hbase> scan 't1', {COLUMNS => ['c1', 'c2'], CACHE_BLOCKS => false}

Also for experts, there is an advanced option -- RAW -- which instructs the
scanner to return all cells (including delete markers and uncollected deleted
cells). This option cannot be combined with requesting specific COLUMNS.
Disabled by default.  Example:

  hbase> scan 't1', {RAW => true, VERSIONS => 10}

Besides the default 'toStringBinary' format, 'scan' supports custom formatting
by column.  A user can define a FORMATTER by adding it to the column name in
the scan specification.  The FORMATTER can be stipulated: 

 1. either as a org.apache.hadoop.hbase.util.Bytes method name (e.g, toInt, toString)
 2. or as a custom class followed by method name: e.g. 'c(MyFormatterClass).format'.

Example formatting cf:qualifier1 and cf:qualifier2 both as Integers: 
  hbase> scan 't1', {COLUMNS => ['cf:qualifier1:toInt',
    'cf:qualifier2:c(org.apache.hadoop.hbase.util.Bytes).toInt'] } 

Note that you can specify a FORMATTER by column only (cf:qualifier).  You cannot
specify a FORMATTER for all columns of a column family.

Scan can also be used directly from a table, by first getting a reference to a
table, like such:

  hbase> t = get_table 't'
  hbase> t.scan

Note in the above situation, you can still provide all the filtering, columns,
options, etc as described above.

DELETE操作

hbase(main):005:0* delete

ERROR: wrong number of arguments (0 for 3)

Here is some help for this command:
Put a delete cell value at specified table/row/column and optionally
timestamp coordinates.  Deletes must match the deleted cell's
coordinates exactly.  When scanning, a delete cell suppresses older
versions. To delete a cell from  't1' at row 'r1' under column 'c1'
marked with the time 'ts1', do:

  hbase> delete 'ns1:t1', 'r1', 'c1', ts1
  hbase> delete 't1', 'r1', 'c1', ts1
  hbase> delete 't1', 'r1', 'c1', ts1, {VISIBILITY=>'PRIVATE|SECRET'}

The same command can also be run on a table reference. Suppose you had a reference
t to table 't1', the corresponding command would be:

  hbase> t.delete 'r1', 'c1',  ts1
  hbase> t.delete 'r1', 'c1',  ts1, {VISIBILITY=>'PRIVATE|SECRET'}