configure: error: off_t undefined; check your library configuration

最新推荐文章于 2021-07-11 17:58:06 发布
原创 最新推荐文章于 2021-07-11 17:58:06 发布 · 2.9k 阅读 · 0 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#configure: error: off_t undefined;

本文解决了在CentOS7上通过源码安装PHP7时遇到的configure错误问题。通过向配置文件添加特定路径并更新配置，成功克服了该错误。

错误描述

CentOS7 源码安装PHP7 执行 ./configure...命令后抛出错误：configure: error: off_t undefined; check your library configuration

解决办法

  • 添加搜索路径到配置文件
echo '/usr/local/lib64
/usr/local/lib
/usr/lib
/usr/lib64'>>/etc/ld.so.conf
  • 更新配置
ldconfig -v
【庖丁解牛】configure: error: off_t undefined； check your library configuration
互联网老辛
07-23 3726
问题重现 configure: error: off_t undefined; check your library configuration 问题解决 在配置文件里添加如下几行 可以直接复制下面内容： [root@xinsz08 php-7.3.6]# cat /etc/ld.so.conf include ld.so.conf.d/*.conf /usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64 执行： [root@xinsz08 php-7
centos5.8 64bit 编译vlc 笔记
guijiewan的专栏
12-05 8173
转载请注明出处：http://blog.youkuaiyun.com/guijiewan/article/details/8259115 uname -a Linux  2.6.18-308.13.1.el5 #1 SMP Tue Aug 21 17:10:18 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux cat /etc/issue CentOS
php7.3-编译安装过程中碰到的3个错误
weixin_43970805的博客
05-06 435
php7.3在Linux7环境中编译安装过程中碰到的3个错误，解决方法整理如下： configure: error: Please reinstall the libzip distribution #解决方法： wget https://nih.at/libzip/libzip-1.2.0.tar.gz tar -zxvf libzip-1.2.0.tar.gz cd libzip-...
configure: error: off_t undefined； check your library configuration
qq_42499737的博客
07-11 734
问题重现 configure: error: off_t undefined; check your library configuration 问题解决 在配置文件里添加如下几行 可以直接复制下面内容： [root@xinsz08 php-7.3.6]# cat /etc/ld.so.conf include ld.so.conf.d/*.conf /usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64 执行： [root@xinsz08 php-7
configure: error: off_t undefined； check your library configuration解决方法
李勇康的博客
05-06 1468
linux环境下报错 configure: error: off_t undefined; check your library configuration 解决方法 # 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'>>/etc/ld.so.conf # 更新配置 ldconfig -v
#include <Wire.h> #include "MAX30105.h" // 使用MAX3010x_Sensor_Library库 MAX30105 particleSensor; #define BUFFER_SIZE 75 #define NEW_SAMPLES 25 void setup() { Serial.begin(115200); delay(1000); Serial.println("Initializing MAX30102 sensor..."); // 初始化传感器 if (!particleSensor.begin(Wire, I2C_SPEED_FAST)) { Serial.println("MAX30102 not found. Please check wiring/power."); while (1); } Serial.println("Sensor initialized successfully."); byte ledBrightness = 60; byte sampleAverage = 4; byte ledMode = 2; int sampleRate = 100; int pulseWidth = 411; int adcRange = 4096; // 配置传感器 particleSensor.setup(ledBrightness, sampleAverage, ledMode, sampleRate, pulseWidth, adcRange); // 启用温度传感器 particleSensor.enableDIETEMPRDY(); // 软复位 particleSensor.softReset(); delay(100); Serial.println("Configuration complete. Starting readings..."); } void loop() { uint32_t irBuffer[BUFFER_SIZE]; uint32_t redBuffer[BUFFER_SIZE]; // 初始填充缓冲区 for (byte i = 0; i < BUFFER_SIZE; i++) { while (!particleSensor.safeCheck()) { // 使用safeCheck()代替available()和check() delay(1); } redBuffer[i] = particleSensor.getFIFORed(); irBuffer[i] = particleSensor.getFIFOIR(); particleSensor.nextSample(); } processSamples(irBuffer, redBuffer, BUFFER_SIZE); while (true) { // 滑动窗口 for (byte i = 0; i < BUFFER_SIZE - NEW_SAMPLES; i++) { redBuffer[i] = redBuffer[i + NEW_SAMPLES]; irBuffer[i] = irBuffer[i + NEW_SAMPLES]; } // 读取新样本 for (byte i = BUFFER_SIZE - NEW_SAMPLES; i < BUFFER_SIZE; i++) { while (!particleSensor.safeCheck()) { delay(1); } redBuffer[i] = particleSensor.getFIFORed(); irBuffer[i] = particleSensor.getFIFOIR(); particleSensor.nextSample(); delay(2); } processSamples(irBuffer, redBuffer, BUFFER_SIZE); delay(50); } } void processSamples(uint32_t* irBuffer, uint32_t* redBuffer, int bufferLength) { int32_t spo2; int8_t validSPO2; int32_t heartRate; int8_t validHeartRate; maxim_heart_rate_and_oxygen_saturation( irBuffer, bufferLength, redBuffer, &spo2, &validSPO2, &heartRate, &validHeartRate ); Serial.print("HeartRate: "); Serial.print(heartRate); Serial.print("bpm | Valid: "); Serial.print(validHeartRate); Serial.print(" | SpO2: "); Serial.print(spo2); Serial.print("% | Valid: "); Serial.println(validSPO2); } D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino: In function 'void setup()': D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:15:35: error: 'I2C_SPEED_FAST' was not declared in this scope D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:29:18: error: 'class MAX30105' has no member named 'setup'; did you mean 'setBit'? D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:32:18: error: 'class MAX30105' has no member named 'enableDIETEMPRDY' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:35:18: error: 'class MAX30105' has no member named 'softReset' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino: In function 'void loop()': D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:47:28: error: 'class MAX30105' has no member named 'safeCheck' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:50:35: error: 'class MAX30105' has no member named 'getFIFORed' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:51:34: error: 'class MAX30105' has no member named 'getFIFOIR' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:52:20: error: 'class MAX30105' has no member named 'nextSample'; did you mean 'readSample'? D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:66:30: error: 'class MAX30105' has no member named 'safeCheck' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:69:37: error: 'class MAX30105' has no member named 'getFIFORed' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:70:36: error: 'class MAX30105' has no member named 'getFIFOIR' D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:71:22: error: 'class MAX30105' has no member named 'nextSample'; did you mean 'readSample'? D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino: In function 'void processSamples(uint32_t*, uint32_t*, int)': D:\徐景川作业相关\传感器实验\智能传感与检测技术 实习\sketch_jul10a_copy_20250714175331\sketch_jul10a_copy_20250714175331.ino:86:3: error: 'maxim_heart_rate_and_oxygen_saturation' was not declared in this scope exit status 1 Compilation error: 'I2C_SPEED_FAST' was not declared in this scope
最新发布
07-18
- **错误：`undefined reference to 'MAX30105::getIR()'`** 解决方案：在「文件」→「首选项」中开启「编译优化」→ 选择 **Smallest Code** - **错误：`fatal error: heartbeat.h: No such file`** 原因：...
Centos7.x 编译安装PHP7.x
GGGoodLuck的博客
08-24 612
1.安装依赖包 yum -y update yum -y install libxml2 libxml2-devel openssl openssl-devel bzip2 bzip2-devel libcurl libcurl-devel libjpeg libjpeg-devel libpng libpng-devel freetype freetype-devel gmp gmp-devel libmcrypt libmcrypt-devel readline readline-devel lib
跨平台构建统一接口设计：Windows_Linux_macOS下CMake脚本的无缝兼容方案
# 1. 跨平台CMake构建的核心挑战与设计目标 在跨平台C++项目开发中，CMake作为事实上的构建标准，面临诸多核心挑战。首先是**平台差异的透明化处理**——不同操作系统在文件路径、库命名、编译器行为等方面的不一致...
centos7编译php7 configure: error: off_t undefined; check your library configuration
xlelou的博客
01-15 5780
# 添加搜索路径到配置文件 echo '/usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64'&gt;&gt;/etc/ld.so.conf # 更新配置 ldconfig -v
php7.3.* 版本 安装时,执行configure报错error: off_t undefined; check your library configuration
pc_wang 随风飘荡
07-20 1763
今天在安装 php7.3.*时,执行configure 操作的时候 提示libzip版本太低,这个依赖我是用yum进行安装的.因为yum源 的版本为 0.10,不足以支持安装php7.3.*最低的要求,所以报错 configure: error: system libzip must be upgraded to version >= 0.11。 首先卸载用yum 安装的低版本的libzi...
php编译t undefined,centos 编译php报错configure: error: off_t undefined; check your library configuration 解...
weixin_42407741的博客
03-11 385
解决办法：echo '/usr/local/lib64/usr/local/lib/usr/lib/usr/lib64'>>/etc/ld.so.conf&&ldconfig -v在编译php时会遇到如上问题，这个问题一般在centos 64位系统中比较多见，解决如下ldconfig命令参数说明：1、 -v或–verbose:用此选项时,ldconfig将显示正在扫描的...
php 源码编译安装报错configure: error: off_t undefined; check your library configuration
linus.lin的博客
09-23 671
off_t 类型是在 头文件 unistd.h中定义的， 在32位系统 编程成 long int ，64位系统则编译成 long long int ， 在进行编译的时候 是默认查找64位的动态链接库， 但是默认情况下 centos 的动态链接库配置文件/etc/ld.so.conf里并没有加入搜索路径， 这个时候需要将 /usr/local/lib64 /usr/lib64 这些针对64位的库文件...
php安装执行configure报错error: off_t undefined; check your library configuration
kfgauss的博客
09-05 522
https://www.jianshu.com/p/f73cc37b1053
PHP7.3 configure,php7.3.* 版本 安装时,执行configure报错error: off_t undefined; check your library configurati...
weixin_35626107的博客
03-26 334
今天在安装 php7.3.*时,执行configure 操作的时候 提示libzip版本太低,这个依赖我是用yum进行安装的.因为yum源 的版本为 0.10,不足以支持安装php7.3.*最低的要求,所以报错configure: error: system libzip must be upgraded to version >= 0.11。首先卸载用yum 安装的低版本的libzip//...
php源码安装执行configure报错error: off_t undefined; check your library configuration
L13976396108的博客
09-06 451
php安装执行configure报错error: off_t undefined; check your library configuration vim /etc/ld.so.conf 添加如下几行 /usr/local/lib64 /usr/local/lib /usr/lib /usr/lib64 #保存退出 :wq ldconfig -v # 使之生效 转载于:https...
off_t undefined
******* ▄︻┻┳═一 *******
05-19 5167
今天帮朋友搭建lnmp环境的时候，在编译php-5.6.30的时候，报以下这个错误 configure: off_t undefined; check your library configuration 备注：linux 的操作系统是centos6.8（2.6.32-642.13.1.el6.x86_64） lnmp环境搭建可以参考我的博文：http://blog.youkuaiyun.com
解决php7.3 configure: error: off_t undefined
weixin_30633949的博客
04-28 386
//解决该问题:php7.3 configure: error: off_t undefined; check your library configuration# 添加搜索路径到配置文件echo '/usr/local/lib64/usr/local/lib/usr/lib/usr/lib64'>>/etc/ld.so.conf# 更新配置ldconfig -v 转载于:https...
configure.ac:16: error: possibly undefined macro: AM_GNU_GETTEXT_VERSION If this token and others are legitimate, please use m4_pattern_allow. See the Autoconf documentation. configure:12537: error: possibly undefined macro: AC_LIB_PREPARE_PREFIX configure:12538: error: possibly undefined macro: AC_LIB_RPATH configure:12543: error: possibly undefined macro: AC_LIB_LINKFLAGS_BODY configure:12551: error: possibly undefined macro: AC_LIB_APPENDTOVAR
05-28
### 解决 configure.ac 文件中未定义的宏错误 在使用 Autoconf 和 Automake 的过程中，如果 `configure.ac` 文件中包含了一些未定义的宏（如 `AM_GNU_GETTEXT_VERSION`、`AC_LIB_PREPARE_PREFIX` 或 `AC_LIB_RPATH`...
评论
成就一亿技术人!
拼手气红包6.0元
还能输入1000个字符
 
红包 添加红包
表情包 插入表情
表情包 代码片
 条评论被折叠 查看
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

dadeity

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值