Ethminer-m1 项目使用与配置指南
ethminer-m1 ethminer fork for M1 Macs 项目地址: https://gitcode.com/gh_mirrors/et/ethminer-m1
1. 项目目录结构及介绍
Ethminer-m1 项目是为了在 M1 芯片的 Mac 上运行 Ethminer 而创建的分支。以下是其目录结构及各部分的简要介绍:
ethminer-m1/
├── .github/ # GitHub 工作流和模板
├── cmake/ # CMake 构建配置文件
├── docs/ # 项目文档
├── ethminer/ # Ethminer 主程序代码
├── libapicore/ # Ethminer 使用的核心库
├── libdevcore/ # Ethminer 使用的开发核心库
├── libethash-cl/ # Ethash OpenCL 实现库
├── libethash-cpu/ # Ethash CPU 实现库
├── libethash-cuda/ # Ethash CUDA 实现库
├── libethcore/ # Ethminer 使用的 Ethcore 库
├── libhwmon/ # Ethminer 使用的硬件监控库
├── libpoolprotocols/ # Ethminer 使用的矿池协议库
├── scripts/ # 构建和部署脚本
├── .bumpversion.cfg # 版本 bump 配置文件
├── .clang-format # Clang 格式配置文件
├── .clang-tidy # Clang Tidy 配置文件
├── .gitattributes # Git 属性配置文件
├── .gitignore # Git 忽略文件列表
├── .gitmodules # Git 子模块配置文件
├── .travis.yml # Travis CI 配置文件
├── BuildInfo.h.in # 构建信息头文件模板
├── CHANGELOG.md # 更改日志文件
├── CMakeLists.txt # CMake 主配置文件
├── CODEOWNERS # 代码所有者文件
├── LICENSE # 许可证文件
├── README.md # 项目说明文件
├── appveyor.yml # AppVeyor CI 配置文件
├── circle.yml # CircleCI CI 配置文件
2. 项目的启动文件介绍
Ethminer-m1 项目的启动主要是通过命令行进行的。主要的启动文件是位于 ethminer/
目录下的 ethminer
主程序。
启动 Ethminer 的基本命令如下:
./ethminer [选项]
要查看所有可用的命令和选项,可以运行:
./ethminer --help
3. 项目的配置文件介绍
Ethminer-m1 的配置主要是通过命令行参数来完成的。然而,也可以使用配置文件来简化启动过程。配置文件通常是简单的文本文件,包含了启动 Ethminer 时需要的参数。
一个基本的配置文件例子可能如下所示:
# ethminer 配置文件示例
--farm-restart-time 300
--pool http://your-pool-url:port
--wallet your-wallet-address
--password x
你可以将这个配置文件保存为一个文件,例如 ethminer.conf
,然后在启动 Ethminer 时指定它:
./ethminer --config ethminer.conf
请注意,具体的配置参数需要根据你的矿池和钱包信息进行相应的替换。在实际使用中,你可能还需要根据你的 GPU 类型和其他特定需求调整配置参数。
ethminer-m1 ethminer fork for M1 Macs 项目地址: https://gitcode.com/gh_mirrors/et/ethminer-m1
创作声明:本文部分内容由AI辅助生成(AIGC),仅供参考