【亲测免费】 ESP32-CAM 项目教程

ESP32-CAM 项目教程

【免费下载链接】esp32cam OV2640 camera on ESP32-CAM, Arduino library 项目地址: https://gitcode.com/gh_mirrors/es/esp32cam

项目介绍

ESP32-CAM 是一个基于 ESP32 芯片的摄像头模块，广泛应用于物联网设备中。该项目由 yoursunny 维护，提供了丰富的功能和示例代码，帮助开发者快速集成摄像头到各种应用中。

项目快速启动

硬件准备

• ESP32-CAM 开发板
• USB 转 TTL 模块
• 摄像头模块（如 OV2640）
• 5V 电源

软件准备

• Arduino IDE
• ESP32 开发板支持包

代码示例

#include "esp_camera.h"
#include "WiFi.h"

// 摄像头配置
#define PWDN_GPIO_NUM     32
#define RESET_GPIO_NUM    -1
#define XCLK_GPIO_NUM      0
#define SIOD_GPIO_NUM     26
#define SIOC_GPIO_NUM     27
#define Y9_GPIO_NUM       35
#define Y8_GPIO_NUM       34
#define Y7_GPIO_NUM       39
#define Y6_GPIO_NUM       36
#define Y5_GPIO_NUM       21
#define Y4_GPIO_NUM       19
#define Y3_GPIO_NUM       18
#define Y2_GPIO_NUM        5
#define VSYNC_GPIO_NUM    25
#define HREF_GPIO_NUM     23
#define PCLK_GPIO_NUM     22

const char* ssid = "your_SSID";
const char* password = "your_PASSWORD";

void setup() {
  Serial.begin(115200);
  WiFi.begin(ssid, password);
  while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.println("Connecting to WiFi...");
  }
  Serial.println("Connected to WiFi");

  camera_config_t config;
  config.ledc_channel = LEDC_CHANNEL_0;
  config.ledc_timer = LEDC_TIMER_0;
  config.pin_d0 = Y2_GPIO_NUM;
  config.pin_d1 = Y3_GPIO_NUM;
  config.pin_d2 = Y4_GPIO_NUM;
  config.pin_d3 = Y5_GPIO_NUM;
  config.pin_d4 = Y6_GPIO_NUM;
  config.pin_d5 = Y7_GPIO_NUM;
  config.pin_d6 = Y8_GPIO_NUM;
  config.pin_d7 = Y9_GPIO_NUM;
  config.pin_xclk = XCLK_GPIO_NUM;
  config.pin_pclk = PCLK_GPIO_NUM;
  config.pin_vsync = VSYNC_GPIO_NUM;
  config.pin_href = HREF_GPIO_NUM;
  config.pin_sscb_sda = SIOD_GPIO_NUM;
  config.pin_sscb_scl = SIOC_GPIO_NUM;
  config.pin_pwdn = PWDN_GPIO_NUM;
  config.pin_reset = RESET_GPIO_NUM;
  config.xclk_freq_hz = 20000000;
  config.pixel_format = PIXFORMAT_JPEG;
  config.frame_size = FRAMESIZE_UXGA;
  config.jpeg_quality = 10;
  config.fb_count = 1;

  esp_err_t err = esp_camera_init(&config);
  if (err != ESP_OK) {
    Serial.printf("Camera init failed with error 0x%x", err);
    return;
  }
}

void loop() {
  camera_fb_t * fb = esp_camera_fb_get();
  if (!fb) {
    Serial.println("Camera capture failed");
    return;
  }
  // 处理图像数据
  esp_camera_fb_return(fb);
  delay(1000);
}

应用案例和最佳实践

家庭监控系统

ESP32-CAM 可以用于构建家庭监控系统，通过 Wi-Fi 将实时视频流发送到手机

【免费下载链接】esp32cam OV2640 camera on ESP32-CAM, Arduino library 项目地址: https://gitcode.com/gh_mirrors/es/esp32cam