Warning: date(): It is not safe to rely on the system's timezone settings. You are *required* to use

本文解决在使用PHP获取时间时出现的警告信息问题,提供在php.ini文件中设置时区的方法,以及通过代码临时修改时区的方案。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

php中在获取时间有时会出现这些,

You are *required* to use the date.timezone setting or the date_default_timezone_set() function. 
In case you used any of those methods and you are still getting this warning, you most likely misspelled 
the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select
 your timezone.

解决办法:
在php.ini配置文件中找到date.timezone项,去掉前面的";",添加设置
date.timezone = "Asia/Shanghai"
然后重启环境,就能正常用了,但是如果用不了:
date.timezone = "Asia/Shanghai"下加上:
date_default_timezone_set('UTC');

还有另外的一种方法:

<?php
date_default_timezone_set('PRC');	//这个样子也是可以的,这种方式属于临时修改
?>
翻译: Of course. After reviewing your Gradle files, it's clear the main problem is not a single error but a mix of structural issues, outdated practices, and critical typos. Your build script merges settings that should be in separate files and uses fragile methods that will cause constant problems. Here is a breakdown of the issues and a step-by-step guide to fix them. ----- ### \#\# 1. Critical Errors That Will Break the Build These issues need to be fixed first, as they will prevent Gradle from running correctly. #### **A. Typo in `targetSdk`** In your module's `build.gradle`, you have a typo. * **Problem:** `targetsdk 34` * **Fix:** It should be `targetSdk` (with a capital 'S'). <!-- end list --> ```groovy // In your module's build.gradle defaultConfig { minSdk 29 targetSdk 34 // FIX: Was 'targetsdk' } ``` #### **B. Typo in JaCoCo Configuration** In your `createOfflineTestCoverageReport` task, you have a typo in the word "configurations". * **Problem:** `classpath: configur3+ations.jacocoAnt.asPath` * **Fix:** It should be `configurations.jacocoAnt.asPath`. <!-- end list --> ```groovy // In your JaCoCo task ant.taskdef(name: 'report', classname: 'org.jacoco.ant.ReportTask', classpath: configurations.jacocoAnt.asPath) // FIX: Was 'configur3+ations' ``` ----- ### \#\# 2. Major Structural Problems Your project's build logic is incorrectly structured. You've mixed settings for the root project and the `model_base` module into one file. #### **A. Root Project and Module Logic are Mixed** You should have at least two `build.gradle` files: one in the project's root directory and one inside your `model_base` module. * **Project Root `build.gradle` or `build.gradle.kts`:** Should contain `buildscript` settings (like the Android Gradle Plugin version) and `allprojects` repository settings. It should **not** contain `apply plugin: 'com.android.library'` or Android-specific settings like `compileSdk`. * **Module `app/build.gradle` or `library/build.gradle.kts`:** Should contain `plugins { id 'com.android.library' }`, the `android { ... }` block, and the `dependencies { ... }` for that specific module. #### **B. Action Plan: Restructure Your Files** **Step 1: Create a `settings.gradle` file in your project root** (if you don't have one). It tells Gradle which modules are part of your project. ```groovy // settings.gradle include ':model_base' // include ':app' // if you have an app module ``` **Step 2: Clean up your Root `build.gradle` file.** It should only contain build-wide information. ```groovy // Project Root: build.gradle // The buildscript block is an older pattern, but if you keep it: buildscript { repositories { google() mavenCentral() } dependencies { // Use a consistent version for AGP classpath 'com.android.tools.build:gradle:8.1.0' // You don't need JaCoCo here; the plugin handles it. } } allprojects { repositories { google() mavenCentral() maven { url "https://jitpack.io" } } } ``` **Step 3: Create/Fix your Module `model_base/build.gradle` file.** This is where most of your current code should go. ```groovy // Module: model_base/build.gradle // Use the plugins block at the top plugins { id 'com.android.library' id 'jacoco' // Apply jacoco plugin here } android { namespace 'com.st.model_base' compileSdk 34 defaultConfig { minSdk 29 targetSdk 34 // Corrected typo } // ... your other android settings } dependencies { // ... your dependencies implementation 'androidx.appcompat:appcompat:1.6.1' // Updated version } // ... your JaCoCo tasks and configuration ``` ----- ### \#\# 3. Bad Practices and Recommendations These are issues that make your build slow, fragile, and hard to maintain. #### **A. Manual `bootstrapClasspath` Manipulation is Very Bad** Your use of `options.compilerArgs << '-Xbootclasspath/p:...'` and manually rebuilding the `bootstrapClasspath` to include `framework.jar` is an extremely fragile and outdated practice. * **Why it's bad:** It overrides the standard Android compile environment. It can break with any update to AGP, Gradle, or Java. It makes your build completely dependent on a local JAR file. * **Recommendation:** **Remove all three `gradle.projectsEvaluated` blocks.** Rely on the `compileSdk 34` to provide the Android APIs. If you absolutely need APIs not available in the public SDK, this approach is still not recommended and indicates a potential design flaw. #### **B. `dependsOn(clean)` is an Anti-Pattern** Your line `createOfflineTestCoverageReport.dependsOn(clean)` is very inefficient. * **Why it's bad:** It forces a complete project clean and recompile **every time** you want to generate a report. This will make your build process incredibly slow. * **Recommendation:** **Delete this line.** Gradle's tasks are designed to be incremental. #### **C. Redundant Configurations** You have multiple `tasks.withType(Test)` and `gradle.projectsEvaluated` blocks. This makes the script confusing. * **Recommendation:** Combine them into single blocks to avoid conflicts and make the logic clear. #### **D. Outdated Dependencies and Repositories** * **JCenter is Deprecated:** Remove `jcenter()` from your repositories. It was shut down years ago and can slow down your build as Gradle tries to connect to it. `mavenCentral()` has replaced it. * **Old AppCompat Library:** `androidx.appcompat:appcompat:1.4.1` is old for `compileSdk 34`. Update it to a more recent version like `1.6.1` to avoid potential incompatibilities.
最新发布
07-24
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值