ODBC ERROR 7410

FIX: You receive error message 7410 when you use a distributed query as a query parameter for the xp_sendmail stored procedure or the sp_makewebtask stored procedure in SQL Server 2000

In Microsoft SQL Server 2000 Service Pack 3 (SP3), when you pass a distributed query to the @query parameter of the xp_sendmail stored procedure or the sp_makewebtask stored procedure, the procedure may fail and you may receive the following error message:

Server: Msg 7410, Level 16, State 1, Line 1
Remote access not allowed for Windows NT user activated by SETUSER.

This problem only occurs when a SQL Server 2000 SP3 instance runs the stored procedures with a distributed query. The version of the linked server is not important.

Note The same distributed queries ran successfully in earlier versions of Microsoft SQL Server 2000.
 

To resolve this problem:
1.obtain the latest service pack for Microsoft SQL Server 2000.

2.Use a global temporary table.
1.>Use a global temporary table for intermediate storage, and then use the global temporary table in the sp_makewebtask stored procedure or in the xp_sendmail stored procedure instead of the linked server. To do this, follow these steps:
select * into ##tmpTable from [<Linked Server Name>].pubs.dbo.authors

2.>Use the global temporary table instead of the linked server query in the @query parameter of the sp_makewebtask stored procedure or the xp_sendmail stored procedure:
EXECUTE sp_makewebtask 'c:/test.htm',
@query = 'select * from ##tmpTable',
@resultstitle ='report title',
@HTMLHeader=3

3.>Drop the global temporary table:
DROP TABLE ##tmpTable

3.Use a flat text file.
Use a flat text file for intermediate storage of the linked server query output. To do this, follow these steps:
1>Store the linked server query output that you want in a flat text file:
EXEC xp_cmdshell 'osql.exe -E -Q"<Linked Server Query>" -oc:/testmail.txt'
2>Use the BCP utility to copy the data from the specified flat text file to a SQL Server table.
3>Use the SQL Server table instead of the linked server in the @query parameter of the sp_makewebtask stored procedure or the xp_sendmail stored procedure:
EXECUTE sp_makewebtask 'c:/test.htm',
@query = 'select * from <SQL Server Table>',
@resultstitle ='report title',
@HTMLHeader=3
Note You may also specify multiple SELECT statements in the @query parameter if multiple SQL Server tables are created in step 2.
4>Drop the SQL Server table that was created in step 2.

Note For the xp_sendmail stored procedure, you can also work around the problem by storing the output of the linked server data in a text file, and then send the output file as an attachment by using the @attachment parameter of the xp_sendmail stored procedure.


### ODBC 连接时出现 SQL1042C 错误的原因及解决方案 当遇到 ODBC 连接错误 `[HY000] [IBM][CLI Driver] SQL1042C` 时,通常表示客户端与数据库服务器之间的通信存在问题。此错误可能由多种原因引起。 #### 可能的原因分析 网络配置不当可能导致此类错误的发生。如果防火墙阻止了必要的端口或网络路径不通畅,则会引发连接失败[^1]。此外,不正确的驱动程序版本也可能导致兼容性问题并触发该错误码。确保使用的 IBM 数据库客户机 (如 DB2 或者其他支持的数据库) 驱动是最新的,并且适用于操作系统环境非常重要[^3]。 另一个常见原因是数据库服务未启动或是监听地址设置有误。确认目标数据库实例正在运行,并且其侦听器已正确配置为接受来自应用程序所在主机的请求也是解决问题的关键步骤之一[^2]。 对于特定于 IBM Db2 的情况,还需检查 `db2dsdriver.cfg` 文件中的数据源定义是否准确无误。任何拼写上的差异或者是参数缺失都可能会造成类似的连接障碍。同时也要验证所指定的安全性和认证选项是否匹配实际部署的要求。 最后,在某些情况下,临时性的资源不足(例如内存溢出)也会表现为这种类型的错误消息。因此建议监控系统性能指标来排除这类潜在因素的影响。 #### 解决方案概述 针对上述提到的各种可能性采取相应的措施可以有效减少甚至消除 SQL1042C 错误: - **更新驱动程序**:获取最新版的 IBM 客户端工具包,并按照官方文档说明完成安装过程。 - **审查网络状况**:测试从应用服务器到数据库服务器间的连通性;必要时调整安全策略允许必需的数据传输。 - **校验服务状态和服务配置**:重启相关服务以确保它们处于活动状态;仔细核对所有涉及的服务端口和协议设定。 - **优化配置文件**:依据实际情况修改 `db2dsdriver.cfg` 中的相关条目,使其更贴合当前的工作负载需求。 - **评估硬件条件**:定期查看日志记录寻找异常模式,及时处理发现的问题以免影响正常业务操作。 通过以上方法能够帮助定位具体成因并对症下药,从而实现稳定可靠的 ODBC 连接体验。 ```sql -- 示例:检查Db2服务状态 SELECT SERVICE_NAME, STATUS FROM TABLE(SYSPROC.MON_GET_SERVICE('', -1)); ```
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值