win7+vmware8+centos6.3安装lamp

一、安装vmware8+centos6.3（网络选择nat方式）

二、配置ifcfg-eth0(查看vmware –>edit->virtual network editor->vmnet8->nat settings)

Vi /etc/sysconfig/network-scripts/ ifcfg-eth0

DEVICE="eth0"

BOOTPROTO="static"

NM_CONTROLLED="yes"

ONBOOT=yes

TYPE="Ethernet"

UUID="229b524e-7f41-461a-909d-b96e6a4e3706"

HWADDR=00:0C:29:61:25:46

DEFROUTE=yes

PEERDNS=yes

PEERROUTES=yes

IPV4_FAILURE_FATAL=yes

IPV6INIT=no

NAME="System eth0"

IPADDR=192.168.81.10#不要不subnet ip 和gateway 重复

GATEWAY=192.168.81.2#和vmnet8 的 一致

 

重启：service network restart

三、安装lamp

1、Vi /etc/resolv.conf 添加如下

nameserver 8.8.8.8

nameserver 8.8.4.4

2、yum install httpd mysql-server php php-devel php-mysql

3、vi /etc/httpd/conf/httpd.conf

#ServerName www.localhost.com:80  打开

重启：/etc/init.d/httpd restart

4、查看防火墙：/etc/init.d/iptables status

开启80端口：

vi /etc/sysconfig/iptables 添加如下

-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

重启：/etc/init.d/iptables restart

5、mysql 启动：/etc/init.d/mysqld start

退出：quit

查看：netstat -tuln | grep ':3306'

设置密码：mysqladmin -u root password 'your.password'

6、webroot  vi /var/www/html/index.php

 

四、在win7下打开浏览器访问192.168.81.10