WebServiceClass.as

本文介绍了 WebServiceClass 类,它是一个 Web 服务包装类,支持通过 callMethod 添加监听器,或通过 callMethodAndRespond 进行回调,还可与 WebServiceQueue 配合使用。同时给出了该类的使用许可条件,以及类的具体实现代码。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

//----------------------------------------------------------------------------------
// WebServiceClass
// - Requires: ResponderClass.as
//----------------------------------------------------------------------------------
// Created and copyright held by:
// Jesse R. Warden (jesterxl@jessewarden.com)
// April 23, 2003
//----------------------------------------------------------------------------------
// A web service wrapper class.  Supports listeners via callMethod,
// or callbacks via callMethodAndRespond.  Can be used with WebServiceQueue.
//----------------------------------------------------------------------------------
// License For Use
//----------------------------------------------------------------------------------
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
//
// 1. Redistributions of source code must retain the above copyright notice, this
// list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright notice,
// this list of conditions and the following disclaimer in the documentation
// and/or other materials provided with the distribution.
//
// 3. The name of the author may not be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
// WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
// EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
// OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
// IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
// OF SUCH DAMAGE.
//----------------------------------------------------------------------------------

_global.WebServiceClass = function(gatewayConnection, serviceURL){
        if(ResponderClass == null){
                trace("*** JXL Says: You cannot use WebServiceClass.callMethodAndRespond without ResponderClass installed, only callMethod ***");
        }
        this.init.apply(this, arguments);
};

WebServiceClass.prototype.init = function(gatewayConnection, serviceURL){
        ASBroadcaster.initialize(this);
        this.gatewayConnection = gatewayConnection;
        this.service = this.gatewayConnection.getService(serviceURL);
};

WebServiceClass.prototype.callMethod = function(methodName, arg1, arg2, argN){
        arguments.shift();
        arguments.unshift(this);
        this.service[methodName].apply(this.service, arguments);
};

WebServiceClass.prototype.callMethodAndRespond = function(methodName,
                                                          callback_obj,
                                                          resultHandler,
                                                          statusHandler,
                                                          arg1, arg2, argN){
        // my check for the existance of ResponderClass
        if(ResponderClass == null){
                trace("*** JXL Says: ERROR ***");
                trace("WebServiceClass.callMethodAndRespond will not work without ResponderClass");
                trace("If you are going to call this method, make sure you have the ResponderClass included");
                trace("***********************");
        }
        
        for(var i=0; i<4; i++){
                arguments.shift();
        }
        
        var responder = new ResponderClass(callback_obj, resultHandler, statusHandler);
        arguments.unshift(responder);
        
        this.service[methodName].apply(this.service, arguments);
};

WebServiceClass.prototype.onResult = function(){
        arguments.unshift("onResult");
        this.broadcastMessage.apply(this, arguments);
};

WebServiceClass.prototype.onStatus = function(){
        arguments.unshift("onStatus");
        this.broadcastMessage.apply(this, arguments);
};
资源下载链接为: https://pan.quark.cn/s/abbae039bf2a 无锡平芯微半导体科技有限公司生产的A1SHB三极管(全称PW2301A)是一款P沟道增强型MOSFET,具备低内阻、高重复雪崩耐受能力以及高效电源切换设计等优势。其技术规格如下:最大漏源电压(VDS)为-20V,最大连续漏极电流(ID)为-3A,可在此条件下稳定工作;栅源电压(VGS)最大值为±12V,能承受正反向电压;脉冲漏极电流(IDM)可达-10A,适合处理短暂高电流脉冲;最大功率耗散(PD)为1W,可防止器件过热。A1SHB采用3引脚SOT23-3封装,小型化设计利于空间受限的应用场景。热特性方面,结到环境的热阻(RθJA)为125℃/W,即每增加1W功率损耗,结温上升125℃,提示设计电路时需考虑散热。 A1SHB的电气性能出色,开关特性优异。开关测试电路及波形图(图1、图2)展示了不同条件下的开关性能,包括开关上升时间(tr)、下降时间(tf)、开启时间(ton)和关闭时间(toff),这些参数对评估MOSFET在高频开关应用中的效率至关重要。图4呈现了漏极电流(ID)与漏源电压(VDS)的关系,图5描绘了输出特性曲线,反映不同栅源电压下漏极电流的变化。图6至图10进一步揭示性能特征:转移特性(图7)显示栅极电压(Vgs)对漏极电流的影响;漏源开态电阻(RDS(ON))随Vgs变化的曲线(图8、图9)展现不同控制电压下的阻抗;图10可能涉及电容特性,对开关操作的响应速度和稳定性有重要影响。 A1SHB三极管(PW2301A)是高性能P沟道MOSFET,适用于低内阻、高效率电源切换及其他多种应用。用户在设计电路时,需充分考虑其电气参数、封装尺寸及热管理,以确保器件的可靠性和长期稳定性。无锡平芯微半导体科技有限公司提供的技术支持和代理商服务,可为用户在产品选型和应用过程中提供有
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值